From 27a817fff30215c43480142762e86022524dcc60 Mon Sep 17 00:00:00 2001
From: Geoffrey Frogeye <geoffrey@frogeye.fr>
Date: Fri, 17 Aug 2018 15:34:09 +0200
Subject: [PATCH] rofi is bae

---
 config/i3/autorandrdefaultmenu |   2 +-
 config/i3/autorandrloadmenu    |   2 +-
 config/i3/autorandrremovemenu  |   2 +-
 config/i3/autorandrsavemenu    |   2 +-
 config/i3/clipmenu             |  52 --------------
 config/i3/clipmenud            | 127 ---------------------------------
 config/i3/config               |  22 +++---
 config/i3/passmenu             |  30 --------
 config/i3/sshmenu              |   9 ---
 config/i3/test                 |   5 --
 10 files changed, 15 insertions(+), 238 deletions(-)
 delete mode 100755 config/i3/clipmenu
 delete mode 100755 config/i3/clipmenud
 delete mode 100755 config/i3/passmenu
 delete mode 100755 config/i3/sshmenu
 delete mode 100644 config/i3/test

diff --git a/config/i3/autorandrdefaultmenu b/config/i3/autorandrdefaultmenu
index 3f8a36e..d2f2d25 100755
--- a/config/i3/autorandrdefaultmenu
+++ b/config/i3/autorandrdefaultmenu
@@ -2,7 +2,7 @@
 
 shopt -s nullglob globstar
 
-profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | ~/.config/i3/dmenu_cmd -p "Default profile" "$@")
+profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | rofi -dmenu -p "Default profile" "$@")
 
 [[ -n $profile ]] || exit
 
diff --git a/config/i3/autorandrloadmenu b/config/i3/autorandrloadmenu
index 930b044..81000eb 100755
--- a/config/i3/autorandrloadmenu
+++ b/config/i3/autorandrloadmenu
@@ -2,7 +2,7 @@
 
 shopt -s nullglob globstar
 
-profile=$(echo -e "common\nhorizontal\nvertical\n$(autorandr 2>&1 | cut -d' ' -f1)" | ~/.config/i3/dmenu_cmd -p "Load profile" "$@")
+profile=$(echo -e "common\nhorizontal\nvertical\n$(autorandr 2>&1 | cut -d' ' -f1)" | rofi -dmenu -p "Load profile" "$@")
 
 [[ -n $profile ]] || exit
 
diff --git a/config/i3/autorandrremovemenu b/config/i3/autorandrremovemenu
index 7b12673..323d72c 100755
--- a/config/i3/autorandrremovemenu
+++ b/config/i3/autorandrremovemenu
@@ -2,7 +2,7 @@
 
 shopt -s nullglob globstar
 
-profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | ~/.config/i3/dmenu_cmd -p "Remove profile" "$@")
+profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | rofi -dmenu -p "Remove profile" "$@")
 
 [[ -n $profile ]] || exit
 
diff --git a/config/i3/autorandrsavemenu b/config/i3/autorandrsavemenu
index bae7989..e24db48 100755
--- a/config/i3/autorandrsavemenu
+++ b/config/i3/autorandrsavemenu
@@ -2,7 +2,7 @@
 
 shopt -s nullglob globstar
 
-profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | ~/.config/i3/dmenu_cmd -p "Save profile" "$@")
+profile=$(echo -e "$(autorandr 2>&1 | cut -d' ' -f1)" | rofi -dmenu -p "Save profile" "$@")
 
 [[ -n $profile ]] || exit
 
diff --git a/config/i3/clipmenu b/config/i3/clipmenu
deleted file mode 100755
index 89935a1..0000000
--- a/config/i3/clipmenu
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-
-shopt -s nullglob
-
-# We use this to make sure the cache files are sorted bytewise
-LC_COLLATE=C
-
-# Some people copy/paste huge swathes of text that could slow down dmenu
-line_length_limit=500
-
-declare -A selections
-ordered_selections=()
-
-files=("$HOME/.clipmenu/"*)
-
-# We can't use `for ... in` here because we need to add files to
-# ordered_selections from last to first -- that is, newest to oldest. Incoming
-# clipboard entries have a ISO datetime prefixed to the front to aid in this.
-for (( i=${#files[@]}-1; i>=0; i-- )); do
-    file=${files[$i]}
-
-    # We look for the first line matching regex /./ here because we want the
-    # first line that can provide reasonable context to the user. That is, if
-    # you have 5 leading lines of whitespace, displaying " (6 lines)" is much
-    # less useful than displaying "foo (6 lines)", where "foo" is the first
-    # line in the entry with actionable context.
-    first_line=$(sed -n '/./{p;q}' "$file" | cut -c1-"$line_length_limit")
-    lines=$(wc -l < "$file")
-
-    if (( lines > 1 )); then
-        first_line+=" ($lines lines)"
-    fi
-
-    ordered_selections+=("$first_line")
-    selections[$first_line]=$file
-done
-
-# It's okay to hardcode `-l 8` here as a sensible default without checking
-# whether `-l` is also in "$@", because the way that dmenu works allows a later
-# argument to override an earlier one. That is, if the user passes in `-l`, our
-# one will be ignored.
-chosen_line=$(printf '%s\n' "${ordered_selections[@]}" | uniq | $HOME/.config/i3/dmenu_cmd -l 8 -p "Copy" "$@")
-
-[[ $chosen_line ]] || exit 1
-
-for selection in clipboard primary; do
-    if type -p xsel >/dev/null 2>&1; then
-        xsel --logfile /dev/null -i --"$selection" < "${selections[$chosen_line]}"
-    else
-        xclip -sel "$selection" < "${selections[$chosen_line]}"
-    fi
-done
diff --git a/config/i3/clipmenud b/config/i3/clipmenud
deleted file mode 100755
index 98edd08..0000000
--- a/config/i3/clipmenud
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/bash
-
-hr_msg() {
-    printf -- '\n--- %s ---\n\n' "$1" >&2
-}
-
-debug() {
-    if (( DEBUG )); then
-        printf '%s\n' "$@" >&2
-    fi
-}
-
-print_debug_info() {
-    # DEBUG comes from the environment
-    if ! (( DEBUG )); then
-        return
-    fi
-
-    local msg="${1?}"
-
-    hr_msg "$msg"
-
-    hr_msg Environment
-    env | LC_ALL=C sort >&2
-
-    cgroup_path=/proc/$$/cgroup
-
-    if [[ -f $cgroup_path ]]; then
-        hr_msg cgroup
-        cat "$cgroup_path" >&2
-    else
-        hr_msg 'NO CGROUP'
-    fi
-
-    hr_msg 'Finished debug info'
-}
-
-print_debug_info 'Initialising'
-
-cache_dir=$HOME/.clipmenu/
-
-# It's ok that this only applies to the final directory.
-# shellcheck disable=SC2174
-mkdir -p -m0700 "$cache_dir"
-
-declare -A last_data
-declare -A last_filename
-
-while sleep "${CLIPMENUD_SLEEP:-0.5}"; do
-    print_debug_info 'About to run selection'
-
-    for selection in clipboard primary; do
-        print_debug_info "About to do selection for '$selection'"
-
-        if type -p xsel >/dev/null 2>&1; then
-            debug 'Using xsel'
-            data=$(xsel --logfile /dev/null -o --"$selection"; printf x)
-        else
-            debug 'Using xclip'
-            data=$(xclip -o -sel "$selection"; printf x)
-        fi
-
-        debug "Data before stripping: $data"
-
-        # We add and remove the x so that trailing newlines are not stripped.
-        # Otherwise, they would be stripped by the very nature of how POSIX
-        # defines command substitution.
-        data=${data%x}
-
-        debug "Data after stripping: $data"
-
-        if [[ $data != *[^[:space:]]* ]]; then
-            debug "Skipping as clipboard is only blank"
-            continue
-        fi
-
-        if [[ ${last_data[$selection]} == "$data" ]]; then
-            debug 'Skipping as last selection is the same as this one'
-            continue
-        fi
-
-        # If we were in the middle of doing a selection when the previous poll
-        # ran, then we may have got a partial clip.
-        possible_partial=${last_data[$selection]}
-        if [[ $possible_partial && $data == "$possible_partial"* ]]; then
-            debug "$possible_partial is a possible partial of $data"
-            debug "Removing ${last_filename[$selection]}"
-            rm -- "${last_filename[$selection]}"
-        fi
-
-        filename="$cache_dir/$(LC_ALL=C date +%F-%T.%N)"
-
-        last_data[$selection]=$data
-        last_filename[$selection]=$filename
-
-        debug "Writing $data to $filename"
-        printf '%s' "$data" > "$filename"
-
-        if ! (( NO_OWN_CLIPBOARD )) && [[ $selection != primary ]]; then
-            # Take ownership of the clipboard, in case the original application
-            # is unable to serve the clipboard request (due to being suspended,
-            # etc).
-            #
-            # Primary is excluded from the change of ownership as applications
-            # sometimes act up if clipboard focus is taken away from them --
-            # for example, urxvt will unhilight text, which is undesirable.
-            #
-            # We can't colocate this with the above copying code because
-            # https://github.com/cdown/clipmenu/issues/34 requires knowing if
-            # we would skip first.
-            if type -p xsel >/dev/null 2>&1; then
-                xsel --logfile /dev/null -o --"$selection" | xsel -i --"$selection"
-            else
-                xclip -o -sel "$selection" | xclip -i -sel "$selection"
-            fi
-        fi
-
-        if ! (( NO_TRANSFER_CLIPBOARD )) && [[ $selection != primary ]]; then
-            # Copy every clipboard content into primary clipboard
-            if type -p xsel >/dev/null 2>&1; then
-                xsel --logfile /dev/null -o --"$selection" | xsel -i --primary
-            else
-                xclip -o -sel "$selection" | xclip -i -sel primary
-            fi
-        fi
-    done
-done
diff --git a/config/i3/config b/config/i3/config
index df41ee8..65f223b 100644
--- a/config/i3/config
+++ b/config/i3/config
@@ -19,6 +19,11 @@ hide_edge_borders both
 #bindsym $mod+y border pixel 2
 #bindsym $mod+n border normal
 
+# Compatibility layer for people coming from other backgrounds
+bindsym Mod1+Tab exec --no-startup-id rofi -modi window -show window
+bindsym Mod1+F2 exec --no-startup-id rofi -modi drun -show drun
+bindsym Mod1+F4 kill
+
 # Font for window titles. Will also be used by the bar unless a different font
 # is used in the bar {} block below.
 
@@ -30,20 +35,16 @@ floating_modifier $mod
 
 # kill focused window
 bindsym $mod+z kill
-#bindsym Mod1+F4 kill
 bindsym button2 kill
 
-# start dmenu (a program launcher)
-bindsym $mod+F2 exec --no-startup-id ~/.config/i3/dmenu_run
-bindsym Mod1+F2 exec --no-startup-id ~/.config/i3/dmenu_run
-
-bindsym $mod+c exec --no-startup-id ~/.config/i3/passmenu --type
-#bindsym $mod+x exec --no-startup-id ~/.config/i3/clipmenu
-bindsym $mod+asterisk exec --no-startup-id ~/.config/i3/sshmenu
-bindsym $mod+dollar exec --no-startup-id ~/.config/i3/sshmenu root
+bindsym $mod+c exec --no-startup-id rofi-pass --last-used
+bindsym $mod+asterisk exec --no-startup-id rofi -modi ssh -show ssh
+bindsym $mod+dollar exec --no-startup-id rofi -modi ssh -show ssh -ssh-command '{terminal} -e {ssh-client} {host} -t "sudo -s -E"'
+bindsym $mod+Tab exec --no-startup-id rofi -modi window -show window
 
 # start program launcher
-bindsym $mod+d exec --no-startup-id ~/.config/i3/dmenu_run
+bindsym $mod+d exec --no-startup-id rofi -modi run -show run
+bindsym $mod+Shift+d exec --no-startup-id rofi -modi drun -show drun
 
 # Start Applications
 bindsym $mod+Return exec urxvtc
@@ -364,7 +365,6 @@ exec --no-startup-id numlockx on # Activate Num lock
 exec --no-startup-id unclutter -root # Hide mouse cursor after some time
 #exec --no-startup-id dunst # Notifications (handled by systemd)
 exec --no-startup-id keynav # Keyboard cursor controller
-#exec --no-startup-id $HOME/.config/i3/clipmenud # Clipboard manager
 #exec --no-startup-id mpd # Music Player Daemon (handled by systemd)
 exec --no-startup-id ~/.config/i3/ashuffle # MPD Auto-refill
 exec --no-startup-id autorandr --change # Screen configuration and everything that depends on it
diff --git a/config/i3/passmenu b/config/i3/passmenu
deleted file mode 100755
index 9a4bf22..0000000
--- a/config/i3/passmenu
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-
-shopt -s nullglob globstar
-
-typeit=0
-if [[ $1 == "--type" ]]; then
-	typeit=1
-	shift
-fi
-
-if PASS=$(which gopass 2> /dev/null); then
-    password_files="$($PASS ls --flat)"
-elif PASS=$(which pass 2> /dev/null); then
-    prefix=${PASSWORD_STORE_DIR-~/.password-store}
-    password_files=( "$prefix"/**/*.gpg )
-    password_files=( "${password_files[@]#"$prefix"/}" )
-    password_files=( "${password_files[@]%.gpg}" )
-else
-    exit
-fi
-
-password=$(printf '%s\n' "${password_files[@]}" | $HOME/.config/i3/dmenu_cmd -p "Passwords" "$@")
-
-[[ -n $password ]] || exit
-
-if [[ $typeit -eq 0 ]]; then
-	$PASS show -c "$password"
-else
-	xdotool - <<<"type --clearmodifiers -- $($PASS show "$password" | head -n 1)"
-fi
diff --git a/config/i3/sshmenu b/config/i3/sshmenu
deleted file mode 100755
index e306c40..0000000
--- a/config/i3/sshmenu
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/bash
-if [ "$1" == 'root' ]; then
-    a=" (root)"
-    b="-t 'sudo -s'"
-fi
-machine=$(cat ~/.ssh/config | grep '^Host ' | cut -d ' ' -f 2 | grep -v '*' | sort | $HOME/.config/i3/dmenu_cmd -p "SSH$a to ")
-if [ ! -z $machine ]; then
-    urxvtc -e ssh $machine $b
-fi
diff --git a/config/i3/test b/config/i3/test
deleted file mode 100644
index b3fb195..0000000
--- a/config/i3/test
+++ /dev/null
@@ -1,5 +0,0 @@
-prefix=${PASSWORD_STORE_DIR-~/.password-store}
-password_files=( "$prefix"/**/*.gpg )
-password_files=( "${password_files[@]#"$prefix"/}" )
-password_files=( "${password_files[@]%.gpg}" )
-echo -e "${password_files[@]}"