# vim: ft=dosini

# Configfile for qutebrowser.
#
# This configfile is parsed by python's configparser in extended
# interpolation mode. The format is very INI-like, so there are
# categories like [general] with "key = value"-pairs.
#
# Note that you shouldn't add your own comments, as this file is
# regenerated every time the config is saved.
#
# Interpolation looks like  ${value}  or  ${section:value} and will be
# replaced by the respective value.
#
# Some settings will expand environment variables. Note that, since
# interpolation is run first, you will need to escape the  $  char as
# described below.
#
# This is the default config, so if you want to remove anything from
# here (as opposed to change/add), for example a key binding, set it to
# an empty value.
#
# You will need to escape the following values:
#   - # at the start of the line (at the first position of the key) (\#)
#   - $ in a value ($$)


# General/miscellaneous options.
[general]

# ignore-case (IgnoreCase):
#     Whether to find text on a page case-insensitively.
#         true: Search case-insensitively
#         false: Search case-sensitively
#         smart: Search case-sensitively if there are capital chars
#     Default: smart
ignore-case = smart

# startpage (List of String):
#     The default page(s) to open at the start, separated by commas.
#     Default: https://start.duckduckgo.com
startpage = https://geoffrey.frogeye.fr/home.php

# yank-ignored-url-parameters (List of String):
#     The URL parameters to strip with :yank url, separated by commas.
#     Default:
#     ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
yank-ignored-url-parameters = ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content

# default-open-dispatcher (String):
#     The default program used to open downloads. Set to an empty string
#     to use the default internal handler.
#     Any {} in the string will be expanded to the filename, else the
#     filename will be appended.
#     Default:
default-open-dispatcher = 

# default-page (FuzzyUrl):
#     The page to open if :open -t/-b/-w is used without URL. Use
#     `about:blank` for a blank page.
#     Default: ${startpage}
default-page = ${startpage}

# auto-search (AutoSearch):
#     Whether to start a search when something else than a URL is
#     entered.
#         naive: Use simple/naive check.
#         dns: Use DNS requests (might be slow!).
#         false: Never search automatically.
#     Default: naive
auto-search = naive

# auto-save-config (Bool):
#     Whether to save the config automatically on quit.
#     Valid values: true, false
#     Default: true
auto-save-config = true

# auto-save-interval (Int):
#     How often (in milliseconds) to auto-save config/cookies/etc.
#     Default: 15000
auto-save-interval = 15000

# editor (ShellCommand):
#     The editor (and arguments) to use for the `open-editor` command.
#     The arguments get split like in a shell, so you can use `"` or `'`
#     to quote them.
#     `{}` gets replaced by the filename of the file to be edited.
#     Default: gvim -f "{}"
editor = gvim -f "{}"

# editor-encoding (Encoding):
#     Encoding to use for editor.
#     Default: utf-8
editor-encoding = utf-8

# private-browsing (Bool):
#     Open new windows in private browsing mode which does not record
#     visited pages.
#     Valid values: true, false
#     Default: false
private-browsing = false

# developer-extras (Bool):
#     Enable extra tools for Web developers.
#     This needs to be enabled for `:inspector` to work and also adds an
#     _Inspect_ entry to the context menu. For QtWebEngine, see
#     'qutebrowser --help' instead.
#     Valid values: true, false
#     Default: false
developer-extras = true

# print-element-backgrounds (Bool):
#     Whether the background color and images are also drawn when the
#     page is printed.
#     This setting only works with Qt 5.8 or newer when using the
#     QtWebEngine backend.
#     Valid values: true, false
#     Default: true
print-element-backgrounds = true

# xss-auditing (Bool):
#     Whether load requests should be monitored for cross-site scripting
#     attempts.
#     Suspicious scripts will be blocked and reported in the inspector's
#     JavaScript console. Enabling this feature might have an impact on
#     performance.
#     Valid values: true, false
#     Default: false
xss-auditing = false

# default-encoding (String):
#     Default encoding to use for websites.
#     The encoding must be a string describing an encoding such as
#     _utf-8_, _iso-8859-1_, etc.
#     Default: iso-8859-1
default-encoding = iso-8859-1

# new-instance-open-target (String):
#     How to open links in an existing instance if a new one is
#     launched.
#         tab: Open a new tab in the existing window and activate the
#     window.
#         tab-bg: Open a new background tab in the existing window and
#     activate the window.
#         tab-silent: Open a new tab in the existing window without
#     activating the window.
#         tab-bg-silent: Open a new background tab in the existing
#     window without activating the window.
#         window: Open in a new window.
#     Default: tab
new-instance-open-target = tab

# new-instance-open-target.window (String):
#     Which window to choose when opening links as new tabs.
#         first-opened: Open new tabs in the first (oldest) opened
#     window.
#         last-opened: Open new tabs in the last (newest) opened window.
#         last-focused: Open new tabs in the most recently focused
#     window.
#         last-visible: Open new tabs in the most recently visible
#     window.
#     Default: last-focused
new-instance-open-target.window = last-focused

# log-javascript-console (String):
#     How to log javascript console messages.
#         none: Don't log messages.
#         debug: Log messages with debug level.
#         info: Log messages with info level.
#     Default: debug
log-javascript-console = debug

# save-session (Bool):
#     Whether to always save the open pages.
#     Valid values: true, false
#     Default: false
save-session = false

# session-default-name (SessionName):
#     The name of the session to save by default, or empty for the last
#     loaded session.
#     Default:
session-default-name = 

# url-incdec-segments (FlagList):
#     The URL segments where `:navigate increment/decrement` will search
#     for a number.
#     Valid values: host, path, query, anchor
#     Default: path,query
url-incdec-segments = path,query


# General options related to the user interface.
[ui]

# history-session-interval (Int):
#     The maximum time in minutes between two history items for them to
#     be considered being from the same session. Use -1 to disable
#     separation.
#     Default: 30
history-session-interval = 30

# zoom-levels (List of Perc):
#     The available zoom levels, separated by commas.
#     Default:
#     25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%

# default-zoom (Perc):
#     The default zoom level.
#     Default: 100%
default-zoom = 100%

# downloads-position (VerticalPosition):
#     Where to show the downloaded files.
#     Valid values: top, bottom
#     Default: top
downloads-position = top

# status-position (VerticalPosition):
#     The position of the status bar.
#     Valid values: top, bottom
#     Default: bottom
status-position = bottom

# message-timeout (Int):
#     Time (in ms) to show messages in the statusbar for.
#     Set to 0 to never clear messages.
#     Default: 2000
message-timeout = 2000

# message-unfocused (Bool):
#     Whether to show messages in unfocused windows.
#     Valid values: true, false
#     Default: false
message-unfocused = false

# confirm-quit (ConfirmQuit):
#     Whether to confirm quitting the application.
#         always: Always show a confirmation.
#         multiple-tabs: Show a confirmation if multiple tabs are
#     opened.
#         downloads: Show a confirmation if downloads are running
#         never: Never show a confirmation.
#     Default: never
confirm-quit = never

# zoom-text-only (Bool):
#     Whether the zoom factor on a frame applies only to the text or to
#     all content.
#     Valid values: true, false
#     Default: false
zoom-text-only = false

# frame-flattening (Bool):
#     Whether to  expand each subframe to its contents.
#     This will flatten all the frames to become one scrollable page.
#     Valid values: true, false
#     Default: false
frame-flattening = false

# user-stylesheet (File):
#     User stylesheet to use (absolute filename or filename relative to
#     the config directory). Will expand environment variables.
#     Default:
user-stylesheet = 

# hide-scrollbar (Bool):
#     Hide the main scrollbar.
#     Valid values: true, false
#     Default: true
hide-scrollbar = true

# smooth-scrolling (Bool):
#     Whether to enable smooth scrolling for web pages. Note smooth
#     scrolling does not work with the :scroll-px command.
#     Valid values: true, false
#     Default: false
smooth-scrolling = false

# remove-finished-downloads (Int):
#     Number of milliseconds to wait before removing finished downloads.
#     Will not be removed if value is -1.
#     Default: -1
remove-finished-downloads = -1

# hide-statusbar (Bool):
#     Whether to hide the statusbar unless a message is shown.
#     Valid values: true, false
#     Default: false
hide-statusbar = false

# statusbar-padding (Padding):
#     Padding for statusbar (top, bottom, left, right).
#     Default: 1,1,0,0
statusbar-padding = 1,1,0,0

# window-title-format (FormatString):
#     The format to use for the window title. The following placeholders
#     are defined:
#     * `{perc}`: The percentage as a string like `[10%]`.
#     * `{perc_raw}`: The raw percentage, e.g. `10`
#     * `{title}`: The title of the current web page
#     * `{title_sep}`: The string ` - ` if a title is set, empty
#     otherwise.
#     * `{id}`: The internal window ID of this window.
#     * `{scroll_pos}`: The page scroll position.
#     * `{host}`: The host of the current web page.
#     * `{backend}`: Either 'webkit' or 'webengine'
#     * `{private}` : Indicates when private mode is enabled.
#     Default: {perc}{title}{title_sep}qutebrowser
window-title-format = {perc}{title}{title_sep}qutebrowser

# modal-js-dialog (Bool):
#     Use standard JavaScript modal dialog for alert() and confirm()
#     Valid values: true, false
#     Default: false
modal-js-dialog = false

# hide-wayland-decoration (Bool):
#     Hide the window decoration when using wayland (requires restart)
#     Valid values: true, false
#     Default: false
hide-wayland-decoration = false

# keyhint-blacklist (List of String):
#     Keychains that shouldn't be shown in the keyhint dialog
#     Globs are supported, so ';*' will blacklist all keychainsstarting
#     with ';'. Use '*' to disable keyhints
#     Default:
keyhint-blacklist = 

# keyhint-delay (Int):
#     Time from pressing a key to seeing the keyhint dialog (ms)
#     Default: 500
keyhint-delay = 500

# prompt-radius (Int):
#     The rounding radius for the edges of prompts.
#     Default: 8
prompt-radius = 8

# prompt-filebrowser (Bool):
#     Show a filebrowser in upload/download prompts.
#     Valid values: true, false
#     Default: true
prompt-filebrowser = true


# Settings related to the network.
[network]

# do-not-track (Bool):
#     Value to send in the `DNT` header.
#     Valid values: true, false
#     Default: true
do-not-track = true

# accept-language (String):
#     Value to send in the `accept-language` header.
#     Default: en-US,en
accept-language = fr-FR,en-US,en

# referer-header (String):
#     Send the Referer header
#         always: Always send.
#         never: Never send; this is not recommended, as some sites may
#     break.
#         same-domain: Only send for the same domain. This will still
#     protect your privacy, but shouldn't break any sites.
#     Default: same-domain
referer-header = same-domain

# user-agent (UserAgent):
#     User agent to send. Empty to send the default.
#     Default:
user-agent = 

# proxy (Proxy):
#     The proxy to use.
#     In addition to the listed values, you can use a `socks://...` or
#     `http://...` URL.
#         system: Use the system wide proxy.
#         none: Don't use any proxy
#     Default: system
proxy = system

# proxy-dns-requests (Bool):
#     Whether to send DNS requests over the configured proxy.
#     Valid values: true, false
#     Default: true
proxy-dns-requests = true

# ssl-strict (BoolAsk):
#     Whether to validate SSL handshakes.
#     Valid values: true, false, ask
#     Default: ask
ssl-strict = ask

# dns-prefetch (Bool):
#     Whether to try to pre-fetch DNS entries to speed up browsing.
#     Valid values: true, false
#     Default: true
dns-prefetch = true

# custom-headers (HeaderDict):
#     Set custom headers for qutebrowser HTTP requests.
#     Default:
custom-headers = 

# netrc-file (File):
#     Set location of a netrc-file for HTTP authentication. If empty,
#     ~/.netrc is used.
#     Default:
netrc-file = 


# Options related to completion and command history.
[completion]

# show (String):
#     When to show the autocompletion window.
#         always: Whenever a completion is available.
#         auto: Whenever a completion is requested.
#         never: Never.
#     Default: always
show = always

# download-path-suggestion (String):
#     What to display in the download filename input.
#         path: Show only the download path.
#         filename: Show only download filename.
#         both: Show download path and filename.
#     Default: path
download-path-suggestion = path

# timestamp-format (TimestampTemplate):
#     How to format timestamps (e.g. for history)
#     Default: %Y-%m-%d
timestamp-format = %Y-%m-%d

# height (PercOrInt):
#     The height of the completion, in px or as percentage of the
#     window.
#     Default: 50%
height = 50%

# cmd-history-max-items (Int):
#     How many commands to save in the command history.
#     0: no history / -1: unlimited
#     Default: 100
cmd-history-max-items = 100

# web-history-max-items (Int):
#     How many URLs to show in the web history.
#     0: no history / -1: unlimited
#     Default: 1000
web-history-max-items = 1000

# quick-complete (Bool):
#     Whether to move on to the next part when there's only one possible
#     completion left.
#     Valid values: true, false
#     Default: true
quick-complete = true

# shrink (Bool):
#     Whether to shrink the completion to be smaller than the configured
#     size if there are no scrollbars.
#     Valid values: true, false
#     Default: false
shrink = false

# scrollbar-width (Int):
#     Width of the scrollbar in the completion window (in px).
#     Default: 12
scrollbar-width = 12

# scrollbar-padding (Int):
#     Padding of scrollbar handle in completion window (in px).
#     Default: 2
scrollbar-padding = 2


# Options related to input modes.
[input]

# timeout (Int):
#     Timeout (in milliseconds) for ambiguous key bindings.
#     If the current input forms both a complete match and a partial
#     match, the complete match will be executed after this time.
#     Default: 500
timeout = 500

# partial-timeout (Int):
#     Timeout (in milliseconds) for partially typed key bindings.
#     If the current input forms only partial matches, the keystring
#     will be cleared after this time.
#     Default: 5000
partial-timeout = 1000

# insert-mode-on-plugins (Bool):
#     Whether to switch to insert mode when clicking flash and other
#     plugins.
#     Valid values: true, false
#     Default: false
insert-mode-on-plugins = false

# auto-leave-insert-mode (Bool):
#     Whether to leave insert mode if a non-editable element is clicked.
#     Valid values: true, false
#     Default: true
auto-leave-insert-mode = true

# auto-insert-mode (Bool):
#     Whether to automatically enter insert mode if an editable element
#     is focused after page load.
#     Valid values: true, false
#     Default: false
auto-insert-mode = false

# forward-unbound-keys (String):
#     Whether to forward unbound keys to the webview in normal mode.
#         all: Forward all unbound keys.
#         auto: Forward unbound non-alphanumeric keys.
#         none: Don't forward any keys.
#     Default: auto
forward-unbound-keys = auto

# spatial-navigation (Bool):
#     Enables or disables the Spatial Navigation feature.
#     Spatial navigation consists in the ability to navigate between
#     focusable elements in a Web page, such as hyperlinks and form
#     controls, by using Left, Right, Up and Down arrow keys. For
#     example, if a user presses the Right key, heuristics determine
#     whether there is an element he might be trying to reach towards
#     the right and which element he probably wants.
#     Valid values: true, false
#     Default: false
spatial-navigation = false

# links-included-in-focus-chain (Bool):
#     Whether hyperlinks should be included in the keyboard focus chain.
#     Valid values: true, false
#     Default: true
links-included-in-focus-chain = true

# rocker-gestures (Bool):
#     Whether to enable Opera-like mouse rocker gestures. This disables
#     the context menu.
#     Valid values: true, false
#     Default: false
rocker-gestures = false

# mouse-zoom-divider (Int):
#     How much to divide the mouse wheel movements to translate them
#     into zoom increments.
#     Default: 512
mouse-zoom-divider = 512


# Configuration of the tab bar.
[tabs]

# background-tabs (Bool):
#     Whether to open new tabs (middleclick/ctrl+click) in background.
#     Valid values: true, false
#     Default: false
background-tabs = false

# select-on-remove (SelectOnRemove):
#     Which tab to select when the focused tab is removed.
#         prev: Select the tab which came before the closed one (left in
#     horizontal, above in vertical).
#         next: Select the tab which came after the closed one (right in
#     horizontal, below in vertical).
#         last-used: Select the previously selected tab.
#     Default: next
select-on-remove = next

# new-tab-position (NewTabPosition):
#     How new tabs are positioned.
#         prev: Before the current tab.
#         next: After the current tab.
#         first: At the beginning.
#         last: At the end.
#     Default: next
new-tab-position = next

# new-tab-position-explicit (NewTabPosition):
#     How new tabs opened explicitly are positioned.
#         prev: Before the current tab.
#         next: After the current tab.
#         first: At the beginning.
#         last: At the end.
#     Default: last
new-tab-position-explicit = last

# last-close (String):
#     Behavior when the last tab is closed.
#         ignore: Don't do anything.
#         blank: Load a blank page.
#         startpage: Load the start page.
#         default-page: Load the default page.
#         close: Close the window.
#     Default: ignore
last-close = ignore

# show (String):
#     When to show the tab bar
#         always: Always show the tab bar.
#         never: Always hide the tab bar.
#         multiple: Hide the tab bar if only one tab is open.
#         switching: Show the tab bar when switching tabs.
#     Default: always
show = multiple

# show-switching-delay (Int):
#     Time to show the tab bar before hiding it when tabs->show is set
#     to 'switching'.
#     Default: 800
show-switching-delay = 800

# wrap (Bool):
#     Whether to wrap when changing tabs.
#     Valid values: true, false
#     Default: true
wrap = true

# movable (Bool):
#     Whether tabs should be movable.
#     Valid values: true, false
#     Default: true
movable = true

# close-mouse-button (String):
#     On which mouse button to close tabs.
#         right: Close tabs on right-click.
#         middle: Close tabs on middle-click.
#         none: Don't close tabs using the mouse.
#     Default: middle
close-mouse-button = middle

# position (Position):
#     The position of the tab bar.
#     Valid values: top, bottom, left, right
#     Default: top
position = top

# show-favicons (Bool):
#     Whether to show favicons in the tab bar.
#     Valid values: true, false
#     Default: true
show-favicons = true

# favicon-scale (Float):
#     Scale for favicons in the tab bar. The tab size is unchanged, so
#     big favicons also require extra `tabs->padding`.
#     Default: 1.0
favicon-scale = 1.0

# width (PercOrInt):
#     The width of the tab bar if it's vertical, in px or as percentage
#     of the window.
#     Default: 20%
width = 20%

# pinned-width (Int):
#     The width for pinned tabs with a horizontal tabbar, in px.
#     Default: 43
pinned-width = 43

# indicator-width (Int):
#     Width of the progress indicator (0 to disable).
#     Default: 3
indicator-width = 3

# tabs-are-windows (Bool):
#     Whether to open windows instead of tabs.
#     Valid values: true, false
#     Default: false
tabs-are-windows = true

# title-format (FormatString):
#     The format to use for the tab title. The following placeholders
#     are defined:
#     * `{perc}`: The percentage as a string like `[10%]`.
#     * `{perc_raw}`: The raw percentage, e.g. `10`
#     * `{title}`: The title of the current web page
#     * `{title_sep}`: The string ` - ` if a title is set, empty
#     otherwise.
#     * `{index}`: The index of this tab.
#     * `{id}`: The internal tab ID of this tab.
#     * `{scroll_pos}`: The page scroll position.
#     * `{host}`: The host of the current web page.
#     * `{backend}`: Either 'webkit' or 'webengine'
#     * `{private}` : Indicates when private mode is enabled.
#     Default: {index}: {title}
title-format = {index}: {title}

# title-format-pinned (FormatString):
#     The format to use for the tab title for pinned tabs. The same
#     placeholders like for title-format are defined.
#     Default: {index}
title-format-pinned = {index}

# title-alignment (TextAlignment):
#     Alignment of the text inside of tabs
#     Valid values: left, right, center
#     Default: left
title-alignment = left

# mousewheel-tab-switching (Bool):
#     Switch between tabs using the mouse wheel.
#     Valid values: true, false
#     Default: true
mousewheel-tab-switching = true

# padding (Padding):
#     Padding for tabs (top, bottom, left, right).
#     Default: 0,0,5,5
padding = 0,0,5,5

# indicator-padding (Padding):
#     Padding for indicators (top, bottom, left, right).
#     Default: 2,2,0,4
indicator-padding = 2,2,0,4


# Settings related to cache and storage.
[storage]

# download-directory (Directory):
#     The directory to save downloads to. An empty value selects a
#     sensible os-specific default. Will expand environment variables.
#     Default:
download-directory = 

# prompt-download-directory (Bool):
#     Whether to prompt the user for the download location.
#     If set to false, 'download-directory' will be used.
#     Valid values: true, false
#     Default: true
prompt-download-directory = true

# remember-download-directory (Bool):
#     Whether to remember the last used download directory.
#     Valid values: true, false
#     Default: true
remember-download-directory = true

# maximum-pages-in-cache (Int):
#     The maximum number of pages to hold in the global memory page
#     cache.
#     The Page Cache allows for a nicer user experience when navigating
#     forth or back to pages in the forward/back history, by pausing and
#     resuming up to _n_ pages.
#     For more information about the feature, please refer to:
#     http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
#     Default: 0
maximum-pages-in-cache = 0

# offline-web-application-cache (Bool):
#     Whether support for the HTML 5 web application cache feature is
#     enabled.
#     An application cache acts like an HTTP cache in some sense. For
#     documents that use the application cache via JavaScript, the
#     loader engine will first ask the application cache for the
#     contents, before hitting the network.
#     The feature is described in details at:
#     http://dev.w3.org/html5/spec/Overview.html#appcache
#     Valid values: true, false
#     Default: true
offline-web-application-cache = true

# local-storage (Bool):
#     Whether support for HTML 5 local storage and Web SQL is enabled.
#     Valid values: true, false
#     Default: true
local-storage = true

# cache-size (Int):
#     Size of the HTTP network cache. Empty to use the default value.
#     Default:
cache-size = 52428800


# Loaded plugins/scripts and allowed actions.
[content]

# allow-images (Bool):
#     Whether images are automatically loaded in web pages.
#     Valid values: true, false
#     Default: true
allow-images = true

# allow-javascript (Bool):
#     Enables or disables the running of JavaScript programs.
#     Valid values: true, false
#     Default: true
allow-javascript = true

# allow-plugins (Bool):
#     Enables or disables plugins in Web pages.
#     Qt plugins with a mimetype such as "application/x-qt-plugin" are
#     not affected by this setting.
#     Valid values: true, false
#     Default: false
allow-plugins = false

# webgl (Bool):
#     Enables or disables WebGL.
#     Valid values: true, false
#     Default: true
webgl = true

# hyperlink-auditing (Bool):
#     Enable or disable hyperlink auditing (<a ping>).
#     Valid values: true, false
#     Default: false
hyperlink-auditing = false

# geolocation (BoolAsk):
#     Allow websites to request geolocations.
#     Valid values: true, false, ask
#     Default: ask
geolocation = ask

# notifications (BoolAsk):
#     Allow websites to show notifications.
#     Valid values: true, false, ask
#     Default: ask
notifications = true

# media-capture (BoolAsk):
#     Allow websites to record audio/video.
#     Valid values: true, false, ask
#     Default: ask
media-capture = ask

# javascript-can-open-windows-automatically (Bool):
#     Whether JavaScript programs can open new windows without user
#     interaction.
#     Valid values: true, false
#     Default: false
javascript-can-open-windows-automatically = false

# javascript-can-close-windows (Bool):
#     Whether JavaScript programs can close windows.
#     Valid values: true, false
#     Default: false
javascript-can-close-windows = false

# javascript-can-access-clipboard (Bool):
#     Whether JavaScript programs can read or write to the clipboard.
#     With QtWebEngine, writing the clipboard as response to a user
#     interaction is always allowed.
#     Valid values: true, false
#     Default: false
javascript-can-access-clipboard = false

# ignore-javascript-prompt (Bool):
#     Whether all javascript prompts should be ignored.
#     Valid values: true, false
#     Default: false
ignore-javascript-prompt = false

# ignore-javascript-alert (Bool):
#     Whether all javascript alerts should be ignored.
#     Valid values: true, false
#     Default: false
ignore-javascript-alert = false

# local-content-can-access-remote-urls (Bool):
#     Whether locally loaded documents are allowed to access remote
#     urls.
#     Valid values: true, false
#     Default: false
local-content-can-access-remote-urls = false

# local-content-can-access-file-urls (Bool):
#     Whether locally loaded documents are allowed to access other local
#     urls.
#     Valid values: true, false
#     Default: true
local-content-can-access-file-urls = true

# cookies-accept (String):
#     Control which cookies to accept.
#         all: Accept all cookies.
#         no-3rdparty: Accept cookies from the same origin only.
#         no-unknown-3rdparty: Accept cookies from the same origin only,
#     unless a cookie is already set for the domain.
#         never: Don't accept cookies at all.
#     Default: no-3rdparty
cookies-accept = no-3rdparty

# cookies-store (Bool):
#     Whether to store cookies. Note this option needs a restart with
#     QtWebEngine on Qt < 5.9.
#     Valid values: true, false
#     Default: true
cookies-store = true

# host-block-lists (List of Url):
#     List of URLs of lists which contain hosts to block.
#     The file can be in one of the following formats:
#     - An '/etc/hosts'-like file
#     - One host per line
#     - A zip-file of any of the above, with either only one file, or a
#     file named 'hosts' (with any extension).
#     Default:
#     https://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
host-block-lists = http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext

# host-blocking-enabled (Bool):
#     Whether host blocking is enabled.
#     Valid values: true, false
#     Default: true
host-blocking-enabled = true

# host-blocking-whitelist (List of String):
#     List of domains that should always be loaded, despite being
#     ad-blocked.
#     Domains may contain * and ? wildcards and are otherwise required
#     to exactly match the requested domain.
#     Local domains are always exempt from hostblocking.
#     Default: piwik.org
host-blocking-whitelist = piwik.org

# enable-pdfjs (Bool):
#     Enable pdf.js to view PDF files in the browser.
#     Note that the files can still be downloaded by clicking the
#     download button in the pdf.js viewer.
#     Valid values: true, false
#     Default: false
enable-pdfjs = false


# Hinting settings.
[hints]

# border (String):
#     CSS border value for hints.
#     Default: 1px solid #E3BE23
border = 1px solid #E3BE23

# mode (String):
#     Mode to use for hints.
#         number: Use numeric hints. (In this mode you can also type
#     letters form the hinted element to filter and reduce the number of
#     elements that are hinted.)
#         letter: Use the chars in the hints -> chars setting.
#         word: Use hints words based on the html elements and the extra
#     words.
#     Default: letter
mode = letter

# chars (UniqueCharString):
#     Chars used for hint strings.
#     Default: asdfghjkl
chars = asdfghjkl

# min-chars (Int):
#     Minimum number of chars used for hint strings.
#     Default: 1
min-chars = 1

# scatter (Bool):
#     Whether to scatter hint key chains (like Vimium) or not (like
#     dwb). Ignored for number hints.
#     Valid values: true, false
#     Default: true
scatter = true

# uppercase (Bool):
#     Make chars in hint strings uppercase.
#     Valid values: true, false
#     Default: false
uppercase = false

# dictionary (File):
#     The dictionary file to be used by the word hints.
#     Default: /usr/share/dict/words
dictionary = /usr/share/dict/words

# auto-follow (String):
#     Controls when a hint can be automatically followed without the
#     user pressing Enter.
#         always: Auto-follow whenever there is only a single hint on a
#     page.
#         unique-match: Auto-follow whenever there is a unique non-empty
#     match in either the hint string (word mode) or filter (number
#     mode).
#         full-match: Follow the hint when the user typed the whole hint
#     (letter, word or number mode) or the element's text (only in
#     number mode).
#         never: The user will always need to press Enter to follow a
#     hint.
#     Default: unique-match
auto-follow = unique-match

# auto-follow-timeout (Int):
#     A timeout (in milliseconds) to inhibit normal-mode key bindings
#     after a successful auto-follow.
#     Default: 0
auto-follow-timeout = 0

# next-regexes (List of Regex):
#     A comma-separated list of regexes to use for 'next' links.
#     Default:
#     \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b

# prev-regexes (List of Regex):
#     A comma-separated list of regexes to use for 'prev' links.
#     Default: \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
prev-regexes = \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b

# find-implementation (String):
#     Which implementation to use to find elements to hint.
#         javascript: Better but slower
#         python: Slightly worse but faster
#     Default: python
find-implementation = python

# hide-unmatched-rapid-hints (Bool):
#     Controls hiding unmatched hints in rapid mode.
#     Valid values: true, false
#     Default: true
hide-unmatched-rapid-hints = true


# Definitions of search engines which can be used via the address bar.
# The searchengine named `DEFAULT` is used when `general -> auto-search`
# is true and something else than a URL was entered to be opened. Other
# search engines can be used by prepending the search engine name to the
# search term, e.g. `:open google qutebrowser`. The string `{}` will be
# replaced by the search term, use `{{` and `}}` for literal `{`/`}`
# signs.
[searchengines]
DEFAULT = https://www.qwant.com/?t=web&q={}
arch = https://wiki.archlinux.org/?search={}
gfr = https://www.google.fr/search?hl=fr&q={}
archp = https://www.archlinux.org/packages/?q={}
github = https://github.com/search?q={}
yt = https://www.youtube.com/results?search_query={}
aur = https://aur.archlinux.org/packages/?K={}
gi = http://images.google.com/search?q={}
g = https://www.google.fr/search?q={}
wa = https://www.wolframalpha.com/input/?i={}
dockerhub = https://hub.docker.com/search/?isAutomated=0&isOfficial=0&page=1&pullCount=0&q={}&starCount=0
npm = https://www.npmjs.com/search?q={}


# Aliases for commands.
# By default, no aliases are defined. Example which adds a new command
# `:qtb` to open qutebrowsers website:
# `qtb = open https://www.qutebrowser.org/`
[aliases]


# Colors used in the UI.
# A value can be in one of the following format:
#  * `#RGB`/`#RRGGBB`/`#RRRGGGBBB`/`#RRRRGGGGBBBB`
#  * An SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
#  * transparent (no color)
#  * `rgb(r, g, b)` / `rgba(r, g, b, a)` (values 0-255 or percentages)
#  * `hsv(h, s, v)` / `hsva(h, s, v, a)` (values 0-255, hue 0-359)
#  * A gradient as explained in http://doc.qt.io/qt-5/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
# A *.system value determines the color system to use for color
# interpolation between similarly-named *.start and *.stop entries,
# regardless of how they are defined in the options. Valid values are
# 'rgb', 'hsv', and 'hsl'.
# The `hints.*` values are a special case as they're real CSS colors, not Qt-CSS colors. There, for a gradient, you need to use `-webkit-gradient`, see https://www.webkit.org/blog/175/introducing-css-gradients/[the WebKit documentation].
[colors]

# completion.fg (QtColor):
#     Text color of the completion widget.
#     Default: white
completion.fg = #f1ebeb

# completion.bg (QssColor):
#     Background color of the completion widget.
#     Default: #333333
completion.bg = #58584e

# completion.alternate-bg (QssColor):
#     Alternating background color of the completion widget.
#     Default: #444444
completion.alternate-bg = #48483e

# completion.category.fg (QtColor):
#     Foreground color of completion widget category headers.
#     Default: white
completion.category.fg = #f1ebeb

# completion.category.bg (QssColor):
#     Background color of the completion widget category headers.
#     Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888,
#     stop:1 #505050)
completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #76715e, stop:1 #48483e)

# completion.category.border.top (QssColor):
#     Top border color of the completion widget category headers.
#     Default: black
completion.category.border.top = #272822

# completion.category.border.bottom (QssColor):
#     Bottom border color of the completion widget category headers.
#     Default: ${completion.category.border.top}
completion.category.border.bottom = ${completion.category.border.top}

# completion.item.selected.fg (QtColor):
#     Foreground color of the selected completion item.
#     Default: black
completion.item.selected.fg = ${completion.fg}

# completion.item.selected.bg (QssColor):
#     Background color of the selected completion item.
#     Default: #e8c000
completion.item.selected.bg = #d4c96e

# completion.item.selected.border.top (QssColor):
#     Top border color of the completion widget category headers.
#     Default: #bbbb00
completion.item.selected.border.top = #e7db75

# completion.item.selected.border.bottom (QssColor):
#     Bottom border color of the selected completion item.
#     Default: ${completion.item.selected.border.top}
completion.item.selected.border.bottom = ${completion.item.selected.border.top}

# completion.match.fg (QssColor):
#     Foreground color of the matched text in the completion.
#     Default: #ff4444
completion.match.fg = #fa2772

# completion.scrollbar.fg (QssColor):
#     Color of the scrollbar handle in completion view.
#     Default: ${completion.fg}
completion.scrollbar.fg = ${completion.fg}

# completion.scrollbar.bg (QssColor):
#     Color of the scrollbar in completion view
#     Default: ${completion.bg}
completion.scrollbar.bg = ${completion.bg}

# statusbar.fg (QssColor):
#     Foreground color of the statusbar.
#     Default: white
statusbar.fg = #f1ebeb

# statusbar.bg (QssColor):
#     Background color of the statusbar.
#     Default: black
statusbar.bg = #272822

# statusbar.fg.private (QssColor):
#     Foreground color of the statusbar in private browsing mode.
#     Default: ${statusbar.fg}
statusbar.fg.private = ${statusbar.fg}

# statusbar.bg.private (QssColor):
#     Background color of the statusbar in private browsing mode.
#     Default: #666666
statusbar.bg.private = #666666

# statusbar.fg.insert (QssColor):
#     Foreground color of the statusbar in insert mode.
#     Default: ${statusbar.fg}
statusbar.fg.insert = ${statusbar.fg}

# statusbar.bg.insert (QssColor):
#     Background color of the statusbar in insert mode.
#     Default: darkgreen
statusbar.bg.insert = #8fc029

# statusbar.fg.command (QssColor):
#     Foreground color of the statusbar in command mode.
#     Default: ${statusbar.fg}
statusbar.fg.command = ${statusbar.fg}

# statusbar.bg.command (QssColor):
#     Background color of the statusbar in command mode.
#     Default: ${statusbar.bg}
statusbar.bg.command = ${statusbar.bg}

# statusbar.fg.command.private (QssColor):
#     Foreground color of the statusbar in private browsing + command
#     mode.
#     Default: ${statusbar.fg.private}
statusbar.fg.command.private = ${statusbar.fg.private}

# statusbar.bg.command.private (QssColor):
#     Background color of the statusbar in private browsing + command
#     mode.
#     Default: ${statusbar.bg.private}
statusbar.bg.command.private = ${statusbar.bg.private}

# statusbar.fg.caret (QssColor):
#     Foreground color of the statusbar in caret mode.
#     Default: ${statusbar.fg}
statusbar.fg.caret = ${statusbar.fg}

# statusbar.bg.caret (QssColor):
#     Background color of the statusbar in caret mode.
#     Default: purple
statusbar.bg.caret = #9358fe

# statusbar.fg.caret-selection (QssColor):
#     Foreground color of the statusbar in caret mode with a selection
#     Default: ${statusbar.fg}
statusbar.fg.caret-selection = ${statusbar.fg}

# statusbar.bg.caret-selection (QssColor):
#     Background color of the statusbar in caret mode with a selection
#     Default: #a12dff
statusbar.bg.caret-selection = #55bcce

# statusbar.progress.bg (QssColor):
#     Background color of the progress bar.
#     Default: white
statusbar.progress.bg = ${statusbar.fg}

# statusbar.url.fg (QssColor):
#     Default foreground color of the URL in the statusbar.
#     Default: ${statusbar.fg}
statusbar.url.fg = ${statusbar.fg}

# statusbar.url.fg.success (QssColor):
#     Foreground color of the URL in the statusbar on successful load
#     (http).
#     Default: white
statusbar.url.fg.success = #66efd5

# statusbar.url.fg.success.https (QssColor):
#     Foreground color of the URL in the statusbar on successful load
#     (https).
#     Default: lime
statusbar.url.fg.success.https = #a7e22e

# statusbar.url.fg.error (QssColor):
#     Foreground color of the URL in the statusbar on error.
#     Default: orange
statusbar.url.fg.error = #fa2772

# statusbar.url.fg.warn (QssColor):
#     Foreground color of the URL in the statusbar when there's a
#     warning.
#     Default: yellow
statusbar.url.fg.warn = #e7db75

# statusbar.url.fg.hover (QssColor):
#     Foreground color of the URL in the statusbar for hovered links.
#     Default: aqua
statusbar.url.fg.hover = #ae82ff

# tabs.fg.odd (QtColor):
#     Foreground color of unselected odd tabs.
#     Default: white
tabs.fg.odd = ${completion.fg}

# tabs.bg.odd (QtColor):
#     Background color of unselected odd tabs.
#     Default: grey
tabs.bg.odd = ${completion.bg}

# tabs.fg.even (QtColor):
#     Foreground color of unselected even tabs.
#     Default: white
tabs.fg.even = ${completion.fg}

# tabs.bg.even (QtColor):
#     Background color of unselected even tabs.
#     Default: darkgrey
tabs.bg.even = ${completion.alternate-bg}

# tabs.fg.selected.odd (QtColor):
#     Foreground color of selected odd tabs.
#     Default: white
tabs.fg.selected.odd = ${completion.item.selected.fg}

# tabs.bg.selected.odd (QtColor):
#     Background color of selected odd tabs.
#     Default: black
tabs.bg.selected.odd = ${completion.item.selected.bg}

# tabs.fg.selected.even (QtColor):
#     Foreground color of selected even tabs.
#     Default: ${tabs.fg.selected.odd}
tabs.fg.selected.even = ${tabs.fg.selected.odd}

# tabs.bg.selected.even (QtColor):
#     Background color of selected even tabs.
#     Default: ${tabs.bg.selected.odd}
tabs.bg.selected.even = ${tabs.bg.selected.odd}

# tabs.bg.bar (QtColor):
#     Background color of the tab bar.
#     Default: #555555
tabs.bg.bar = ${statusbar.bg}

# tabs.indicator.start (QtColor):
#     Color gradient start for the tab indicator.
#     Default: #0000aa
tabs.indicator.start = #55bcce

# tabs.indicator.stop (QtColor):
#     Color gradient end for the tab indicator.
#     Default: #00aa00
tabs.indicator.stop = #8fc029

# tabs.indicator.error (QtColor):
#     Color for the tab indicator on errors..
#     Default: #ff0000
tabs.indicator.error = #dc2566

# tabs.indicator.system (ColorSystem):
#     Color gradient interpolation system for the tab indicator.
#         rgb: Interpolate in the RGB color system.
#         hsv: Interpolate in the HSV color system.
#         hsl: Interpolate in the HSL color system.
#         none: Don't show a gradient.
#     Default: rgb
tabs.indicator.system = rgb

# hints.fg (QssColor):
#     Font color for hints.
#     Default: black
hints.fg = #272822

# hints.bg (QssColor):
#     Background color for hints. Note that you can use a `rgba(...)`
#     value for transparency.
#     Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255,
#     247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
hints.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(212, 201, 110, 0.8), stop:1 rgba(231, 219, 117, 0.8))

# hints.fg.match (QssColor):
#     Font color for the matched part of hints.
#     Default: green
hints.fg.match = #8fc029

# downloads.bg.bar (QssColor):
#     Background color for the download bar.
#     Default: black
downloads.bg.bar = ${statusbar.bg}

# downloads.fg.start (QtColor):
#     Color gradient start for download text.
#     Default: white
downloads.fg.start = ${statusbar.fg}

# downloads.bg.start (QtColor):
#     Color gradient start for download backgrounds.
#     Default: #0000aa
downloads.bg.start = #48483e

# downloads.fg.stop (QtColor):
#     Color gradient end for download text.
#     Default: ${downloads.fg.start}
downloads.fg.stop = ${downloads.fg.start}

# downloads.bg.stop (QtColor):
#     Color gradient stop for download backgrounds.
#     Default: #00aa00
downloads.bg.stop = #8fc029

# downloads.fg.system (ColorSystem):
#     Color gradient interpolation system for download text.
#         rgb: Interpolate in the RGB color system.
#         hsv: Interpolate in the HSV color system.
#         hsl: Interpolate in the HSL color system.
#         none: Don't show a gradient.
#     Default: rgb
downloads.fg.system = rgb

# downloads.bg.system (ColorSystem):
#     Color gradient interpolation system for download backgrounds.
#         rgb: Interpolate in the RGB color system.
#         hsv: Interpolate in the HSV color system.
#         hsl: Interpolate in the HSL color system.
#         none: Don't show a gradient.
#     Default: rgb
downloads.bg.system = rgb

# downloads.fg.error (QtColor):
#     Foreground color for downloads with errors.
#     Default: white
downloads.fg.error = ${downloads.fg.start}

# downloads.bg.error (QtColor):
#     Background color for downloads with errors.
#     Default: red
downloads.bg.error = ${messages.bg.error}

# webpage.bg (QtColor):
#     Background color for webpages if unset (or empty to use the
#     theme's color)
#     Default: white
webpage.bg = white

# keyhint.fg (QssColor):
#     Text color for the keyhint widget.
#     Default: #FFFFFF
keyhint.fg = #FFFFFF

# keyhint.fg.suffix (CssColor):
#     Highlight color for keys to complete the current keychain
#     Default: #FFFF00
keyhint.fg.suffix = #FFFF00

# keyhint.bg (QssColor):
#     Background color of the keyhint widget.
#     Default: rgba(0, 0, 0, 80%)
keyhint.bg = rgba(0, 0, 0, 80%)

# messages.fg.error (QssColor):
#     Foreground color of an error message.
#     Default: white
messages.fg.error = ${statusbar.fg}

# messages.bg.error (QssColor):
#     Background color of an error message.
#     Default: red
messages.bg.error = #dc2566

# messages.border.error (QssColor):
#     Border color of an error message.
#     Default: #bb0000
messages.border.error = #fa2772

# messages.fg.warning (QssColor):
#     Foreground color a warning message.
#     Default: white
messages.fg.warning = ${statusbar.fg}

# messages.bg.warning (QssColor):
#     Background color of a warning message.
#     Default: darkorange
messages.bg.warning = #d4c96e

# messages.border.warning (QssColor):
#     Border color of an error message.
#     Default: #d47300
messages.border.warning = #e7db75

# messages.fg.info (QssColor):
#     Foreground color an info message.
#     Default: white
messages.fg.info = ${statusbar.fg}

# messages.bg.info (QssColor):
#     Background color of an info message.
#     Default: black
messages.bg.info = #55bcce

# messages.border.info (QssColor):
#     Border color of an info message.
#     Default: #333333
messages.border.info = #66d9ee

# prompts.fg (QssColor):
#     Foreground color for prompts.
#     Default: white
prompts.fg = ${statusbar.fg}

# prompts.bg (QssColor):
#     Background color for prompts.
#     Default: darkblue
prompts.bg = #56b7a5

# prompts.selected.bg (QssColor):
#     Background color for the selected item in filename prompts.
#     Default: #308cc6
prompts.selected.bg = #55bcce


# Fonts used for the UI, with optional style/weight/size.
#  * Style: `normal`/`italic`/`oblique`
#  * Weight: `normal`, `bold`, `100`..`900`
#  * Size: _number_ `px`/`pt`
[fonts]

# _monospace (Font):
#     Default monospace fonts.
#     Default: xos4 Terminus, Terminus, Monospace, "DejaVu Sans Mono",
#     Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New",
#     Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal
_monospace = Terminus, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New", Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal

# completion (Font):
#     Font used in the completion widget.
#     Default: 8pt ${_monospace}
completion = 8pt ${_monospace}

# completion.category (Font):
#     Font used in the completion categories.
#     Default: bold ${completion}
completion.category = bold ${completion}

# tabbar (QtFont):
#     Font used in the tab bar.
#     Default: 8pt ${_monospace}
tabbar = 8pt ${_monospace}

# statusbar (Font):
#     Font used in the statusbar.
#     Default: 8pt ${_monospace}
statusbar = 8pt ${_monospace}

# downloads (Font):
#     Font used for the downloadbar.
#     Default: 8pt ${_monospace}
downloads = 8pt ${_monospace}

# hints (Font):
#     Font used for the hints.
#     Default: bold 13px ${_monospace}
hints = bold 13px ${_monospace}

# debug-console (QtFont):
#     Font used for the debugging console.
#     Default: 8pt ${_monospace}
debug-console = 8pt ${_monospace}

# web-family-standard (FontFamily):
#     Font family for standard fonts.
#     Default:
web-family-standard = 

# web-family-fixed (FontFamily):
#     Font family for fixed fonts.
#     Default:
web-family-fixed = 

# web-family-serif (FontFamily):
#     Font family for serif fonts.
#     Default:
web-family-serif = 

# web-family-sans-serif (FontFamily):
#     Font family for sans-serif fonts.
#     Default:
web-family-sans-serif = 

# web-family-cursive (FontFamily):
#     Font family for cursive fonts.
#     Default:
web-family-cursive = 

# web-family-fantasy (FontFamily):
#     Font family for fantasy fonts.
#     Default:
web-family-fantasy = 

# web-size-minimum (Int):
#     The hard minimum font size.
#     Default: 0
web-size-minimum = 0

# web-size-minimum-logical (Int):
#     The minimum logical font size that is applied when zooming out.
#     Default: 6
web-size-minimum-logical = 6

# web-size-default (Int):
#     The default font size for regular text.
#     Default: 16
web-size-default = 16

# web-size-default-fixed (Int):
#     The default font size for fixed-pitch text.
#     Default: 13
web-size-default-fixed = 13

# keyhint (Font):
#     Font used in the keyhint widget.
#     Default: 8pt ${_monospace}
keyhint = 8pt ${_monospace}

# messages.error (Font):
#     Font used for error messages.
#     Default: 8pt ${_monospace}
messages.error = 8pt ${_monospace}

# messages.warning (Font):
#     Font used for warning messages.
#     Default: 8pt ${_monospace}
messages.warning = 8pt ${_monospace}

# messages.info (Font):
#     Font used for info messages.
#     Default: 8pt ${_monospace}
messages.info = 8pt ${_monospace}

# prompts (Font):
#     Font used for prompts.
#     Default: 8pt sans-serif
prompts = 8pt sans-serif