Adaptation to using PRIME

For reasons nvidia-xrun doesn't work anymore.
There was an update breaking a lot of things apparently,
but downgrading didn't help so 🤷‍♂️.
Didn't add all the X11 config because might be temporary though.

config/automatrop/host_vars/curacao.geoffrey.frogeye.fr

@@ -15,10 +15,13 @@ extensions:
   - g
   - gh
 x11_screens:
-# nvidia
+# nvidia-xrun
   # - HDMI-0
   # - eDP-1-1
-# nouveau
-  - HDMI-1-3
+# mesa + nouveau
+  # - HDMI-1-3
+  # - eDP1
+# mesa + nvidia
+  - HDMI-1-0
   - eDP1
 max_video_height: 1440

config/automatrop/roles/system/files/xorg/intel_backlight.conf

@@ -1,5 +1,5 @@
 Section "Device"
-    Identifier  "Intel Graphics" 
+    Identifier  "intel"
     Driver      "intel"
     Option      "Backlight"  "intel_backlight"
 EndSection

config/scripts/nv

@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+# Extracted frm nvidia-xrun
+DRY_RUN=0
+
+function execute {
+  if [[ ${DRY_RUN} -eq 1 ]]
+    then
+    echo ">>Dry run. Command: $*"
+  else
+    eval $*
+  fi
+}
+
+
+function turn_off_gpu {
+  if [[ "$REMOVE_DEVICE" == '1' ]]; then
+    echo 'Removing Nvidia bus from the kernel'
+    execute "sudo tee /sys/bus/pci/devices/${DEVICE_BUS_ID}/remove <<<1"
+  else
+    echo 'Enabling powersave for the graphic card'
+    execute "sudo tee /sys/bus/pci/devices/${DEVICE_BUS_ID}/power/control <<<auto"
+  fi
+
+  echo 'Enabling powersave for the PCIe controller'
+  execute "sudo tee /sys/bus/pci/devices/${CONTROLLER_BUS_ID}/power/control <<<auto"
+}
+
+function turn_on_gpu {
+  echo 'Turning the PCIe controller on to allow card rescan'
+  execute "sudo tee /sys/bus/pci/devices/${CONTROLLER_BUS_ID}/power/control <<<on"
+
+  echo 'Waiting 1 second'
+  execute "sleep 1"
+
+  if [[ ! -d /sys/bus/pci/devices/${DEVICE_BUS_ID} ]]; then
+    echo 'Rescanning PCI devices'
+    execute "sudo tee /sys/bus/pci/rescan <<<1"
+    echo "Waiting ${BUS_RESCAN_WAIT_SEC} second for rescan"
+    execute "sleep ${BUS_RESCAN_WAIT_SEC}"
+  fi
+
+  echo 'Turning the card on'
+  execute "sudo tee /sys/bus/pci/devices/${DEVICE_BUS_ID}/power/control <<<on"
+}
+
+function load_modules {
+  for module in "${MODULES_LOAD[@]}"
+  do
+    echo "Loading module ${module}"
+    execute "sudo modprobe ${module}"
+  done
+}
+
+function unload_modules {
+  for module in "${MODULES_UNLOAD[@]}"
+  do
+    echo "Unloading module ${module}"
+    execute "sudo modprobe -r ${module}"
+  done
+}
+
+if [[ "$1" == "-d" ]]
+  then
+    DRY_RUN=1
+    shift 1
+fi
+
+# load config file
+. /etc/default/nvidia-xrun
+
+if [ "$1" == "on" ]
+then
+    turn_on_gpu
+    load_modules
+elif [ "$1" == "off" ]
+then
+    unload_modules
+    turn_off_gpu
+else
+    echo "Usage: $0 [on|off]"
+fi
+