353 lines
11 KiB
Python
Executable file
353 lines
11 KiB
Python
Executable file
import struct
|
|
import time
|
|
import typing
|
|
|
|
import ha_mqtt_discoverable
|
|
import ha_mqtt_discoverable.sensors
|
|
import paho.mqtt.client
|
|
import usb.core
|
|
import usb.util
|
|
|
|
|
|
class Desk:
|
|
"""
|
|
Controls my Linak desk, which is a CBD4P controller connected via USB2LIN06
|
|
This particular combination doesn't seem to report desk height,
|
|
so it is estimated from the physical controller that does work.
|
|
"""
|
|
|
|
# Source of data:
|
|
|
|
# https://github.com/UrbanskiDawid/usb2lin06-HID-in-linux-for-LINAK-Desk-Control-Cable
|
|
# https://github.com/monofox/python-linak-desk-control
|
|
# https://github.com/gryf/linak-ctrl
|
|
|
|
# Desk Control Basic Software
|
|
# https://www.linak-us.com/products/controls/desk-control-basic-software/
|
|
# Says it's connected but doesn't report height and buttons do nothing
|
|
# Expected, as manual says it only works with CBD4A or CBD6
|
|
# Decompiled with ILSpy (easy), doesn't offer much though
|
|
|
|
# CBD4+5 Configurator
|
|
# https://www.linak.nl/technische-ondersteuning/#/cbd4-cbd6s-configurator
|
|
# Connects, and settings can be changed.
|
|
# Don't think there's much that would help with our problem.
|
|
# Decompiled with Ghidra (hard), didn't go super far
|
|
|
|
VEND = 0x12D3
|
|
PROD = 0x0002
|
|
# Official apps use HID library, although only managed to barely make
|
|
# pyhidapi read manufacturer and product once after device reset
|
|
|
|
BUF_LEN = 64
|
|
MOVE_CMD_REPEAT_INTERVAL = 0.2 # s
|
|
STOP_CMD_INTERVAL = 1 # s
|
|
MAX_EST_INTERVAL = 10 # s
|
|
|
|
# Theoritical height values
|
|
VALUE_MIN = 0x0000
|
|
VALUE_MAX = 0x7FFE
|
|
VALUE_DOWN = 0x7FFF
|
|
VALUE_UP = 0x8000
|
|
VALUE_STOP = 0x8001
|
|
|
|
# Measured values
|
|
VALUE_BOT = 0x0001
|
|
VALUE_TOP = 0x1A50
|
|
HEIGHT_BOT = 68
|
|
HEIGHT_TOP = 135
|
|
FULL_RISE_TIME = 17.13 # s
|
|
FULL_FALL_TIME = 16.64 # s
|
|
|
|
# Computed values
|
|
HEIGHT_OFFSET = HEIGHT_BOT # cm
|
|
HEIGHT_MULT = VALUE_TOP / (HEIGHT_TOP - HEIGHT_BOT) # unit / cm
|
|
# Should be 100 in theory (1 unit = 0.1 mm)
|
|
FULL_TIME = (FULL_FALL_TIME + FULL_RISE_TIME) / 2 # s
|
|
SPEED_MARGIN = 0.9
|
|
# Better estimate a bit slower
|
|
SPEED = (VALUE_TOP - VALUE_BOT) / FULL_TIME * SPEED_MARGIN # unit / s
|
|
|
|
def _cmToUnit(self, height: float) -> int:
|
|
return round((height - self.HEIGHT_OFFSET) * self.HEIGHT_MULT)
|
|
|
|
def _unitToCm(self, height: int) -> float:
|
|
return height / self.HEIGHT_MULT + self.HEIGHT_OFFSET
|
|
|
|
def _get(self, typ: int, overflow_ok: bool = False) -> bytes:
|
|
# Magic numbers: get class interface, HID get report
|
|
raw = self._dev.ctrl_transfer(
|
|
0xA1, 0x01, 0x300 + typ, 0, self.BUF_LEN
|
|
).tobytes()
|
|
assert raw[0] == typ
|
|
size = raw[1]
|
|
end = 2 + size
|
|
if not overflow_ok:
|
|
assert end < self.BUF_LEN
|
|
return raw[2:end]
|
|
# Non-implemented types:
|
|
# 1, 7: some kind of stream when the device isn't initialized?
|
|
# size reduces the faster you poll, increases when buttons are held
|
|
# 9: unknown, always report 0
|
|
|
|
def _set(self, typ: int, buf: bytes) -> None:
|
|
buf = bytes([typ]) + buf
|
|
# The official apps pad, not that it doesn't seem to work without
|
|
buf = buf + b"\x00" * (self.BUF_LEN - len(buf))
|
|
# Magic numbers: set class interface, HID set report
|
|
self._dev.ctrl_transfer(0x21, 0x09, 0x300 + typ, 0, buf)
|
|
# Non-implemented types:
|
|
# Some stuff < 10
|
|
|
|
def _reset_estimations(self) -> None:
|
|
self.est_value: None | int = None
|
|
self.est_value_bot = float(self.VALUE_BOT)
|
|
self.est_value_top = float(self.VALUE_TOP)
|
|
self.last_est: float = 0.0
|
|
|
|
def _initialize(self) -> None:
|
|
"""
|
|
Seems to take the USB2LIN06 out of "boot mode"
|
|
(name according to CBD4 Controller) which it is after reset.
|
|
Permits control and reading the report.
|
|
"""
|
|
buf = bytes([0x04, 0x00, 0xFB])
|
|
self._set(3, buf)
|
|
time.sleep(0.5)
|
|
|
|
def __init__(self) -> None:
|
|
self._dev = usb.core.find(idVendor=Desk.VEND, idProduct=Desk.PROD)
|
|
if not self._dev:
|
|
raise ValueError(
|
|
f"Device {Desk.VEND}:" f"{Desk.PROD:04d} " f"not found!"
|
|
)
|
|
|
|
if self._dev.is_kernel_driver_active(0):
|
|
self._dev.detach_kernel_driver(0)
|
|
|
|
self._initialize()
|
|
self._reset_estimations()
|
|
|
|
self.fetch_callback: typing.Callable[["Desk"], None] | None = None
|
|
|
|
def _get_report(self) -> bytes:
|
|
raw = self._get(4)
|
|
assert len(raw) == 0x38
|
|
return raw
|
|
|
|
def _update_estimations(self) -> None:
|
|
now = time.time()
|
|
delta_s = now - self.last_est
|
|
|
|
if delta_s > self.MAX_EST_INTERVAL:
|
|
self._reset_estimations()
|
|
else:
|
|
delta_u = delta_s * self.SPEED
|
|
|
|
if self.destination == self.VALUE_STOP:
|
|
pass
|
|
elif self.destination == self.VALUE_UP:
|
|
self.est_value_bot += delta_u
|
|
self.est_value_top += delta_u
|
|
elif self.destination == self.VALUE_DOWN:
|
|
self.est_value_bot -= delta_u
|
|
self.est_value_top -= delta_u
|
|
else:
|
|
|
|
def move_closer(start_val: float) -> float:
|
|
if start_val < self.destination:
|
|
end_val = start_val + delta_u
|
|
return min(end_val, self.destination)
|
|
else:
|
|
end_val = start_val - delta_u
|
|
return max(end_val, self.destination)
|
|
|
|
self.est_value_bot = move_closer(self.est_value_bot)
|
|
self.est_value_top = move_closer(self.est_value_top)
|
|
|
|
# Clamp
|
|
self.est_value_bot = max(self.VALUE_BOT, self.est_value_bot)
|
|
self.est_value_top = min(self.VALUE_TOP, self.est_value_top)
|
|
|
|
if self.est_value_top == self.est_value_bot:
|
|
self.est_value = int(self.est_value_top)
|
|
|
|
self.last_est = now
|
|
|
|
def fetch(self) -> None:
|
|
for _ in range(3):
|
|
try:
|
|
raw = self._get_report()
|
|
break
|
|
except usb.USBError as e:
|
|
print(e)
|
|
pass
|
|
else:
|
|
raw = self._get_report()
|
|
|
|
# Allegedly, from decompiling:
|
|
# https://www.linak-us.com/products/controls/desk-control-basic-software/
|
|
# Never reports anything in practice
|
|
self.value = struct.unpack("<H", raw[0:2])[0]
|
|
unk = struct.unpack("<H", raw[2:4])[0]
|
|
self.initalized = (unk & 0xF) != 0
|
|
|
|
# From observation. Reliable
|
|
self.destination = (struct.unpack("<H", raw[18:20])[0],)[0]
|
|
|
|
self._update_estimations()
|
|
if self.fetch_callback is not None:
|
|
self.fetch_callback(self)
|
|
|
|
def _move(self, position: int) -> None:
|
|
buf = struct.pack("<H", position) * 4
|
|
self._set(5, buf)
|
|
|
|
def _move_to(self, position: int) -> None:
|
|
# Clamp
|
|
position = max(self.VALUE_BOT, position)
|
|
position = min(self.VALUE_TOP, position)
|
|
|
|
self.fetch()
|
|
while self.est_value != position:
|
|
self._move(position)
|
|
time.sleep(self.MOVE_CMD_REPEAT_INTERVAL)
|
|
self.fetch()
|
|
self.stop()
|
|
|
|
def move_to(self, position: float) -> None:
|
|
"""
|
|
If any button is held during movement, the desk will stop moving,
|
|
yet this will think it's still moving, throwing off the estimates.
|
|
It's not a bug, it's a safety feature.
|
|
Also if you try to make it move when it's already moving,
|
|
it's going to keep moving while desyncing.
|
|
That one is a bug.
|
|
"""
|
|
# Would to stop for a while before reversing course, without being able
|
|
# to read the actual height it's just too annoying to implement
|
|
return self._move_to(self._cmToUnit(position))
|
|
|
|
def stop(self) -> None:
|
|
self._move(self.VALUE_STOP)
|
|
time.sleep(0.5)
|
|
|
|
def get_height_bounds(self) -> tuple[float, float]:
|
|
return (
|
|
self._unitToCm(int(self.est_value_bot)),
|
|
self._unitToCm(int(self.est_value_top)),
|
|
)
|
|
|
|
def get_height(self) -> float | None:
|
|
if self.est_value is None:
|
|
return None
|
|
else:
|
|
return self._unitToCm(self.est_value)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
desk = Desk()
|
|
target_height: float | None = None
|
|
|
|
# Configure the required parameters for the MQTT broker
|
|
mqtt_settings = ha_mqtt_discoverable.Settings.MQTT(host="192.168.7.53")
|
|
|
|
device_info = ha_mqtt_discoverable.DeviceInfo(
|
|
name="Desk",
|
|
manufacturer="Linak",
|
|
model="CBD4P",
|
|
suggested_area="Desk",
|
|
hw_version="77402",
|
|
sw_version="1.91",
|
|
serial_number="000C-34E7",
|
|
)
|
|
|
|
ndigits = 1
|
|
|
|
common_opts = {
|
|
"device": device_info,
|
|
"icon": "mdi:desk",
|
|
"unit_of_measurement": "cm",
|
|
"device_class": "distance",
|
|
"expire_after": 10,
|
|
}
|
|
# TODO Implement proper availability in hq-mqtt-discoverable
|
|
|
|
height_info = ha_mqtt_discoverable.sensors.NumberInfo(
|
|
name="Height ",
|
|
min=desk.HEIGHT_BOT,
|
|
max=desk.HEIGHT_TOP,
|
|
mode="slider",
|
|
step=10 ** (-ndigits),
|
|
unique_id="desk_height",
|
|
**common_opts,
|
|
)
|
|
height_settings = ha_mqtt_discoverable.Settings(
|
|
mqtt=mqtt_settings, entity=height_info
|
|
)
|
|
|
|
def height_callback(
|
|
client: paho.mqtt.client.Client,
|
|
user_data: None,
|
|
message: paho.mqtt.client.MQTTMessage,
|
|
) -> None:
|
|
global target_height
|
|
number = float(message.payload.decode())
|
|
print(f"HA wants to move to: {number}")
|
|
target_height = number
|
|
|
|
height = ha_mqtt_discoverable.sensors.Number(
|
|
height_settings, height_callback
|
|
)
|
|
|
|
height_max_info = ha_mqtt_discoverable.sensors.SensorInfo(
|
|
name="Estimated height max",
|
|
unique_id="desk_height_max",
|
|
entity_category="diagnostic",
|
|
**common_opts,
|
|
)
|
|
height_max_settings = ha_mqtt_discoverable.Settings(
|
|
mqtt=mqtt_settings, entity=height_max_info
|
|
)
|
|
height_max = ha_mqtt_discoverable.sensors.Sensor(height_max_settings)
|
|
|
|
height_min_info = ha_mqtt_discoverable.sensors.SensorInfo(
|
|
name="Estimated height min",
|
|
unique_id="desk_height_min",
|
|
entity_category="diagnostic",
|
|
**common_opts,
|
|
)
|
|
height_min_settings = ha_mqtt_discoverable.Settings(
|
|
mqtt=mqtt_settings, entity=height_min_info
|
|
)
|
|
height_min = ha_mqtt_discoverable.sensors.Sensor(height_min_settings)
|
|
|
|
def fetch_callback(desk: Desk) -> None:
|
|
hcur = desk.get_height()
|
|
hmin, hmax = desk.get_height_bounds()
|
|
|
|
# If none this will set as unknown
|
|
# Also readings can be a bit outside the boundaries,
|
|
# so this skips verification
|
|
if isinstance(hcur, float):
|
|
hcur = round(hcur, ndigits=ndigits)
|
|
height._update_state(hcur)
|
|
|
|
height_max._update_state(round(hmax, ndigits=ndigits))
|
|
height_min._update_state(round(hmin, ndigits=ndigits))
|
|
|
|
desk.fetch_callback = fetch_callback
|
|
|
|
interval = 0.2
|
|
# Need to be rective to catch
|
|
while True:
|
|
if target_height:
|
|
print("Start moving")
|
|
temp_target_height = target_height
|
|
target_height = None
|
|
desk.move_to(temp_target_height)
|
|
print("End moving")
|
|
else:
|
|
time.sleep(interval)
|
|
desk.fetch()
|