No more port 2278

This reverts commit 2a3624af09.

With new razmo this should be fine.

.gitignore

@@ -1 +1,2 @@
-__pycache__
+result
+*.qcow2

.gitmodules

@@ -1,9 +0,0 @@
-[submodule "config/automatrop/roles/mnussbaum.base16-builder-ansible"]
-	path = config/automatrop/roles/mnussbaum.base16-builder-ansible
-	url = https://github.com/GeoffreyFrogeye/base16-builder-ansible.git
-[submodule "config/automatrop/plugins/modules/aur"]
-	path = config/automatrop/plugins/modules/aur
-	url = https://github.com/kewlfft/ansible-aur.git
-[submodule "config/automatrop/plugins/modules/gpg_key"]
-	path = config/automatrop/plugins/modules/gpg_key
-	url = https://github.com/netson/ansible-gpg-key.git

README.md

@@ -0,0 +1,36 @@
+# Geoffrey Frogeye's dotfiles
+
+This repo holds most of my systems configuration.
+It is built on top of the Nix ecosystem
+
+## Directory structure
+
+- `os`, `hm`, `nod`: Re-usable configuration for [NixOS](https://nixos.org/), [home-manager](https://github.com/nix-community/home-manager/#home-manager-using-nix), [Nix-on-Droid](https://github.com/nix-community/nix-on-droid#nix-on-droid) respectively
+    - `<module-name>`: Module. Used to separate configuration in separate logical units.
+        - `default.nix`: Entrypoint for that module. Contains Nix configuration for the module.
+        - `<other file>`: Extra files: scripts to be installed, or ... whatever.
+    - `default.nix`: Entrypoint for that system. Import all the modules.
+    - `<other file>`: Files non-conforming to the structure above because I'm hurrying to have everything working before cleaning.
+- `dk`: Re-usable configuration for [disko](https://github.com/nix-community/disko#disko---declarative-disk-partitioning)
+    - `<name>.nix`: Partitionning scheme configuration. Don't assume a specific context, it will be imported as Disko and NixOS config.
+- `options.nix`: Definition of options exposed to all systems (even though if not relevant for all, it's for simplicity sake).
+- `<profile-name>` (e.g. `curacao`): Configurations for my different devices
+    - `options.nix`: Common options configuration. Don't assume a specific context (for reasons unclear, I'm sure I can do something with that).
+    - `hardware.nix`: NixOS configuration for that specific device.
+    - `dk.nix`: Partitionning configuration. Import a top-level `dk` scheme, adding disks ids and other configuration required.
+    - `os.nix`, `hm.nix`, `nod.nix`: Entrypoint for the device/system configuration. Imports the above files (last two only for NixOS) and contains configuration specific to this combination.
+- `<profile-name>_<media>` (e.g. `pindakaas_sd`): Alternate configuration for a device. Used to test a configuration without altering the "main" one.
+    - `options.nix`: Same as above. Can be a symlink.
+    - `hardware.nix`: Same as above. Should be a symlink.
+    - `dk.nix`: Same as above. Should not be a symlink.
+    - `os.nix`, `hm.nix`, `nod.nix`: Same as above. Should not be a symlink.
+
+## Scripts
+
+They all have a `-h` flag.
+
+## Extensions
+
+There's some things I'm not putting in this public repo: work-related things, and other sensitive things that probably shouldn't be public.
+Those are stored in extensions, i.e. repos with a similar structure to this one, and ultimately importing things from it.
+This is why you might see options not being seemingly used.

bash_logout

@@ -1,2 +0,0 @@
-clear
-reset

bash_profile

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-source ~/.config/shell/shenv
-source ~/.config/shell/commonenv
-source ~/.config/shell/shrc
-source ~/.config/shell/commonrc
-source ~/.config/shell/bashrc

bashrc

@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-
-source ~/.config/shell/shrc
-source ~/.config/shell/commonrc
-source ~/.config/shell/bashrc

build_os.sh

@@ -0,0 +1,73 @@
+#!/usr/bin/env nix-shell
+#! nix-shell -i bash
+#! nix-shell -p nix
+
+set -euo pipefail
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+# Parse arguments
+function help {
+    echo "Usage: $0 [-h|-e|-b] [flake-uri#]name"
+    echo "Build a NixOS configuration on the local machine."
+    echo
+    echo "Arguments:"
+    echo "  profile: OS/disk profile to use"
+    echo
+    echo "Options:"
+    echo "  -h: Display this help message."
+    echo "  -v: Build a virtual machine."
+    echo "  -b: Build a virtual machine with boot loader."
+}
+
+arg=build
+while getopts "hvb" OPTION
+do
+    case "$OPTION" in
+        h)
+            help
+            exit 0
+            ;;
+        v)
+            arg=build-vm
+            ;;
+        b)
+            arg=build-vm-with-bootloader
+            ;;
+        ?)
+            help
+            exit 2
+            ;;
+    esac
+done
+shift "$((OPTIND -1))"
+
+if [ "$#" -ne 1 ]
+then
+    help
+    exit 2
+fi
+
+if [[ "$1" == *"#"* ]]
+then
+    flake_uri="$(echo "$1" | cut -d'#' -f1)"
+    flake_uri=$( cd -- "$flake_uri" &> /dev/null && pwd )
+    name="$(echo "$1" | cut -d'#' -f2)"
+else
+    flake_uri="$SCRIPT_DIR"
+    name="$1"
+fi
+
+if [ ! -f "$flake_uri/flake.nix" ]
+then
+    echo "Flake not found."
+fi
+
+flake="${flake_uri}#${name}"
+
+set -x
+
+nix --extra-experimental-features "nix-command flakes" run "${SCRIPT_DIR}#nixos-rebuild" -- "$arg" --flake "$flake"
+
+echo 
+
+# TODO Use update-local-flakes?

common/disko/single_uefi_btrfs.nix

@@ -0,0 +1,68 @@
+{ pkgs, lib, config, ... }:
+let
+  passwordFile = "/tmp/dotfiles_${config.networking.hostName}_password";
+in
+{
+  disko.devices = {
+    disk = {
+      "${config.networking.hostName}" = {
+        type = "disk";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              # Needs enough to store multiple kernel generations
+              size = "512M";
+              type = "EF00";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = [
+                  "defaults"
+                ];
+              };
+            };
+            luks = {
+              size = "100%";
+              content = {
+                type = "luks";
+                name = "${config.networking.hostName}";
+                passwordFile = passwordFile;
+                settings = {
+                  # Not having SSDs die fast is more important than crypto
+                  # nerds that could potentially discover which filesystem I
+                  # use from TRIM patterns
+                  allowDiscards = true;
+                };
+                content = {
+                  type = "btrfs";
+                  extraArgs = [ "-f" ];
+                  subvolumes = {
+                    "/nixos" = {
+                      mountpoint = "/";
+                      mountOptions = [ "compress=zstd" "noatime" ];
+                    };
+                    "/home" = {
+                      mountpoint = "/home";
+                      mountOptions = [ "compress=zstd" "relatime" ];
+                    };
+                    "/nix" = {
+                      mountpoint = "/nix";
+                      mountOptions = [ "compress=zstd" "noatime" ];
+                    };
+                    # Maybe later
+                    # "/swap" = {
+                    #   mountpoint = "/.swapvol";
+                    #   swap.swapfile.size = "20M";
+                    # };
+                  };
+                };
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}

common/frogarized/default.nix

@@ -0,0 +1,22 @@
+{ pkgs, lib, config, ... }:
+let
+  generator = pkgs.writers.writePython3 "frogarized"
+    {
+      libraries = [ pkgs.python3Packages.colorspacious ];
+    }
+    (builtins.readFile ./frogarized.py);
+  frogarized_json = polarity: pkgs.runCommand "frogarized-${polarity}.json" { } "${generator} --polarity ${polarity} --output json > $out";
+  frogarized_nix = polarity: builtins.fromJSON (builtins.readFile (frogarized_json polarity));
+in
+{
+  config = {
+    stylix = {
+      base16Scheme = frogarized_nix config.stylix.polarity;
+      # On purpose also enable without a DE because stylix complains otherwise
+      image = builtins.fetchurl {
+        url = "https://get.wallhere.com/photo/sunlight-abstract-minimalism-green-simple-circle-light-leaf-wave-material-line-wing-computer-wallpaper-font-close-up-macro-photography-124350.png";
+        sha256 = "sha256:1zfq3f3v34i45mi72pkfqphm8kbhczsg260xjfl6dbydy91d7y93";
+      };
+    };
+  };
+}

common/frogarized/frogarized.py

@@ -0,0 +1,112 @@
+import argparse
+import json
+
+import colorspacious
+import numpy as np
+
+# Original values for the Solarized color scheme,
+# created by Ethan Schoonover (https://ethanschoonover.com/solarized/)
+SOLARIZED_LAB = np.array(
+    [
+        [15, -12, -12],
+        [20, -12, -12],
+        [45, -7, -7],
+        [50, -7, -7],
+        [60, -6, -3],
+        [65, -5, -2],
+        [92, -0, 10],
+        [97, 0, 10],
+        [50, 65, 45],
+        [50, 50, 55],
+        [60, 10, 65],
+        [60, -20, 65],
+        [60, -35, -5],
+        [55, -10, -45],
+        [50, 15, -45],
+        [50, 65, -5],
+    ]
+)
+
+# I couldn't get a perfect translation of Solarized L*a*b values into sRGB,
+# so here is upstream's translation for reference
+SOLARIZED_RGB = np.array(
+    [
+        [0, 43, 54],
+        [7, 54, 66],
+        [88, 110, 117],
+        [101, 123, 131],
+        [131, 148, 150],
+        [147, 161, 161],
+        [238, 232, 213],
+        [253, 246, 227],
+        [220, 50, 47],
+        [203, 75, 22],
+        [181, 137, 0],
+        [133, 153, 0],
+        [42, 161, 152],
+        [38, 139, 210],
+        [108, 113, 196],
+        [211, 54, 130],
+    ]
+)
+
+# Parse arguments
+parser = argparse.ArgumentParser(
+    description="Generate a base16-theme based derived from Solarized"
+)
+parser.add_argument("--source", choices=["lab", "rgb"], default="lab")
+parser.add_argument("--lightness_factor", type=float, default=1.0)
+parser.add_argument("--chroma-factor", type=float, default=1.0)
+parser.add_argument("--hue_shift", type=float, default=-75.0)
+parser.add_argument("--polarity", choices=["dark", "light"], default="dark")
+parser.add_argument(
+    "--output", choices=["json", "truecolor"], default="truecolor"
+)
+args = parser.parse_args()
+
+# Convert source to JCh color space
+if args.source == "lab":
+    solarized_jch = colorspacious.cspace_convert(
+        SOLARIZED_LAB, "CIELab", "JCh"
+    )
+elif args.source == "rgb":
+    solarized_jch = colorspacious.cspace_convert(
+        SOLARIZED_RGB, "sRGB255", "JCh"
+    )
+
+# Build frogarized theme
+jch_factor = [args.lightness_factor, args.chroma_factor, 1]
+jch_shift = [0, 0, args.hue_shift]
+frogarzied_jch = np.vstack(
+    [solarized_jch[:8] * jch_factor + jch_shift, solarized_jch[8:]]
+)
+
+# Convert frogarized to RGB
+frogarized_srgb = colorspacious.cspace_convert(
+    frogarzied_jch, "JCh", "sRGB255"
+)
+frogarized_rgb = np.uint8(np.rint(np.clip(frogarized_srgb, 0, 255)))
+if args.polarity == "light":
+    frogarized_rgb = np.vstack([frogarized_rgb[7::-1], frogarized_rgb[8:]])
+
+# Output
+palette = dict()
+for i in range(16):
+    rgb = frogarized_rgb[i]
+    r, g, b = rgb
+    hex = f"#{r:02x}{g:02x}{b:02x}"
+    palette[f"base{i:02X}"] = hex
+    if args.output == "truecolor":
+        print(f"\033[48;2;{r};{g};{b}m{hex}\033[0m")  # ]]
+        # treesitter is silly and will consider brackets in strings
+        # as indentation, hence the comment above
+if args.output == "json":
+    scheme = palette.copy()
+    scheme.update(
+        {
+            "slug": f"frogarized-{args.polarity}",
+            "scheme": f"Frogarized {args.polarity.title()}",
+            "author": "Geoffrey Frogeye (with work from Ethan Schoonover)",
+        }
+    )
+    print(json.dumps(scheme, indent=4))

config/Xresources/.gitignore

@@ -1 +0,0 @@
-theme

config/Xresources/main

@@ -1,4 +0,0 @@
-#include ".config/Xresources/xft"
-#include ".config/Xresources/theme"
-#include ".config/Xresources/xterm"
-#include ".config/Xresources/urxvt"

config/Xresources/urxvt

@@ -1,61 +0,0 @@
-! Scrollback position
-! TODO Does not work
-
-! do not scroll with output
-URxvt*scrollTtyOutput: false
-
-! scroll in relation to buffer (with mouse scroll or Shift+Page Up)
-URxvt*scrollWithBuffer: true
-
-! scroll back to the bottom on keypress
-URxvt*scrollTtyKeypress: true
-
-
-! Scrollback buffer in secondary screen
-! TODO Does not work
-URxvt.secondaryScreen: 1
-URxvt.secondaryScroll: 0
-
-
-! No scroll bar
-URxvt*scrollBar: false
-
-
-! Font declaration
-URxvt.font: xft:DejaVuSansMono Nerd Font Mono:size=12:antialias=true,xft:Twemoji:size=12:antialias=true,xft:symbola:size=12:minspace=False
-
-! Font spacing
-URxvt.letterSpace: 0
-
-! Disable Ctrl+Shift default bindings
-URxvt.iso14755: false
-URxvt.iso14755_52: false
-
-! Copy/Paste CLIPBOARD selection with Ctrl+Shift+C/V
-URxvt.keysym.C-S-C: eval:selection_to_clipboard
-URxvt.keysym.C-S-V: eval:paste_clipboard
-
-
-! Extensions
-URxvt.perl-ext-common: resize-font,bell-command,readline,selection
-
-! Changing font size on the fly (extension: resize-font, package: urxvt-resize-font-git)
-URxvt.keysym.C-KP_Subtract: resize-font:smaller
-URxvt.keysym.C-KP_Add: resize-font:bigger
-
-! Fake transparency (without compositing manager)
-urxvt*transparent: true
-urxvt*shading: 30
-
-! True transparency (with compositing manager)
-!urxvt*depth: 32
-!urxvt*background: rgba:2700/2800/2200/c800
-
-! Bell command (extension: bell-command)
-URxvt.bell-command: play -n synth sine C5 sine E4 remix 1-2 fade 0.1 0.2 0.1 &> /dev/null
-
-! Open URL in browser (extension: matcher)
-! URxvt.url-launcher: o
-! URxvt.matcher.button: 1
-! URxvt.matcher.rend.0: Uline Bold fg5
-

config/Xresources/xft

@@ -1,9 +0,0 @@
-Xft.dpi: 96
-Xft.antialias: true
-Xft.hinting: true
-Xft.rgba: rgb
-Xft.autohint: false
-Xft.hintstyle: hintslight
-Xft.lcdfilter: lcddefault
-Xcursor.theme: Menda-Cursor
-Xcursor.size:  0

config/Xresources/xterm

@@ -1,15 +0,0 @@
-xterm*faceName : DejaVuSansMono Nerd Font Mono:size=12:antialias=true
-xterm*dynamicColors:      true
-xterm*utf8:               2
-xterm*eightBitInput:      true
-xterm*saveLines:          512
-xterm*scrollKey:          true
-xterm*scrollTtyOutput:    false
-xterm*scrollBar:          false
-xterm*rightScrollBar:     false
-xterm*jumpScroll:         true
-xterm*multiScroll:        true
-xterm*toolBar:            false
-XTerm.vt100.translations: #override \n\
-    Ctrl Shift <Key>C: copy-selection(CLIPBOARD) \n\
-    Ctrl Shift <Key>V: insert-selection(CLIPBOARD)

config/alacritty/.gitignore

@@ -1,2 +0,0 @@
-theme.yml
-alacritty.yml

config/alacritty/alacritty.yml.j2

@@ -1,727 +0,0 @@
-# vi:syntax=yaml
-# Configuration for Alacritty, the GPU enhanced terminal emulator.
-
-# Import additional configuration files
-#
-# Imports are loaded in order, skipping all missing files, with the importing
-# file being loaded last. If a field is already present in a previous import, it
-# will be replaced.
-#
-# All imports must either be absolute paths starting with `/`, or paths relative
-# to the user's home directory starting with `~/`.
-#import:
-#  - /path/to/alacritty.yml
-
-# Any items in the `env` entry below will be added as
-# environment variables. Some entries may override variables
-# set by alacritty itself.
-#env:
-  # TERM variable
-  #
-  # This value is used to set the `$TERM` environment variable for
-  # each instance of Alacritty. If it is not present, alacritty will
-  # check the local terminfo database and use `alacritty` if it is
-  # available, otherwise `xterm-256color` is used.
-  #TERM: xterm-256color
-
-window:
-  # Window dimensions (changes require restart)
-  #
-  # Number of lines/columns (not pixels) in the terminal. The number of columns
-  # must be at least `2`, while using a value of `0` for columns and lines will
-  # fall back to the window manager's recommended size.
-  #dimensions:
-  #  columns: 0
-  #  lines: 0
-
-  # Window position (changes require restart)
-  #
-  # Specified in number of pixels.
-  # If the position is not set, the window manager will handle the placement.
-  #position:
-  #  x: 0
-  #  y: 0
-
-  # Window padding (changes require restart)
-  #
-  # Blank space added around the window in pixels. This padding is scaled
-  # by DPI and the specified value is always added at both opposing sides.
-  #padding:
-  #  x: 0
-  #  y: 0
-
-  # Spread additional padding evenly around the terminal content.
-  dynamic_padding: false
-
-  # Window decorations
-  #
-  # Values for `decorations`:
-  #     - full: Borders and title bar
-  #     - none: Neither borders nor title bar
-  #
-  # Values for `decorations` (macOS only):
-  #     - transparent: Title bar, transparent background and title bar buttons
-  #     - buttonless: Title bar, transparent background and no title bar buttons
-  #decorations: full
-
-  # Startup Mode (changes require restart)
-  #
-  # Values for `startup_mode`:
-  #   - Windowed
-  #   - Maximized
-  #   - Fullscreen
-  #
-  # Values for `startup_mode` (macOS only):
-  #   - SimpleFullscreen
-  #startup_mode: Windowed
-
-  # Window title
-  #title: Alacritty
-
-  # Allow terminal applications to change Alacritty's window title.
-  dynamic_title: true
-
-  # Window class (Linux/BSD only):
-  #class:
-    # Application instance name
-    #instance: Alacritty
-    # General application class
-    #general: Alacritty
-
-  # GTK theme variant (Linux/BSD only)
-  #
-  # Override the variant of the GTK theme. Commonly supported values are `dark`
-  # and `light`. Set this to `None` to use the default theme variant.
-  #gtk_theme_variant: None
-
-#scrolling:
-  # Maximum number of lines in the scrollback buffer.
-  # Specifying '0' will disable scrolling.
-  #history: 10000
-
-  # Scrolling distance multiplier.
-  #multiplier: 3
-
-# Font configuration
-font:
-  # Normal (roman) font face
-  normal:
-    # Font family
-    #
-    # Default:
-    #   - (macOS) Menlo
-    #   - (Linux/BSD) monospace
-    #   - (Windows) Consolas
-    family: DejaVuSansMono Nerd Font Mono
-
-    # The `style` can be specified to pick a specific face.
-    style: Regular
-
-  # Bold font face
-  bold:
-    # Font family
-    #
-    # If the bold family is not specified, it will fall back to the
-    # value specified for the normal font.
-    family: DejaVuSansMono Nerd Font Mono
-
-    # The `style` can be specified to pick a specific face.
-    style: Bold
-
-  # Italic font face
-  italic:
-    # Font family
-    #
-    # If the italic family is not specified, it will fall back to the
-    # value specified for the normal font.
-    family: DejaVuSansMono Nerd Font Mono
-
-    # The `style` can be specified to pick a specific face.
-    style: Oblique
-
-  # Bold italic font face
-  bold_italic:
-    # Font family
-    #
-    # If the bold italic family is not specified, it will fall back to the
-    # value specified for the normal font.
-    family: DejaVuSansMono Nerd Font Mono
-
-    # The `style` can be specified to pick a specific face.
-    style: Bold Oblique
-
-  # Point size
-  size: 12.0
-
-  # Offset is the extra space around each character. `offset.y` can be thought
-  # of as modifying the line spacing, and `offset.x` as modifying the letter
-  # spacing.
-  #offset:
-  #  x: 0
-  #  y: 0
-
-  # Glyph offset determines the locations of the glyphs within their cells with
-  # the default being at the bottom. Increasing `x` moves the glyph to the
-  # right, increasing `y` moves the glyph upward.
-  #glyph_offset:
-  #  x: 0
-  #  y: 0
-
-  # Thin stroke font rendering (macOS only)
-  #
-  # Thin strokes are suitable for retina displays, but for non-retina screens
-  # it is recommended to set `use_thin_strokes` to `false`.
-  #use_thin_strokes: true
-
-{{ base16_schemes['schemes'][base16_scheme]['alacritty']['colors']['base16-' + base16_scheme + '.yml'] }}
-
-# Bell
-#
-# The bell is rung every time the BEL control character is received.
-bell:
-  # Visual Bell Animation
-  #
-  # Animation effect for flashing the screen when the visual bell is rung.
-  #
-  # Values for `animation`:
-  #   - Ease
-  #   - EaseOut
-  #   - EaseOutSine
-  #   - EaseOutQuad
-  #   - EaseOutCubic
-  #   - EaseOutQuart
-  #   - EaseOutQuint
-  #   - EaseOutExpo
-  #   - EaseOutCirc
-  #   - Linear
-  animation: EaseOutExpo
-
-  # Duration of the visual bell flash in milliseconds. A `duration` of `0` will
-  # disable the visual bell animation.
-  duration: 100
-
-  # Visual bell animation color.
-  color: '#000000'
-
-  # Bell Command
-  #
-  # This program is executed whenever the bell is rung.
-  #
-  # When set to `command: None`, no command will be executed.
-  #
-  # Example:
-  #   command:
-  #     program: notify-send
-  #     args: ["Hello, World!"]
-  #
-  command:
-    program: play
-    args: ['-n', 'synth', 'sine', 'C5', 'sine', 'E4', 'remix', '1-2', 'fade', '0.1', '0.2', '0.1']
-    # program: notify-send
-    # args: ["Hello, World!"]
-
-# Background opacity
-#
-# Window opacity as a floating point number from `0.0` to `1.0`.
-# The value `0.0` is completely transparent and `1.0` is opaque.
-#background_opacity: 1.0
-
-#selection:
-  # This string contains all characters that are used as separators for
-  # "semantic words" in Alacritty.
-  #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"
-
-  # When set to `true`, selected text will be copied to the primary clipboard.
-  #save_to_clipboard: false
-
-cursor:
-  # Cursor style
-  #
-  # Values for `style`:
-  #   - ▇ Block
-  #   - _ Underline
-  #   - | Beam
-  #style: Block
-
-    # Cursor blinking state
-    #
-    # Values for `blinking`:
-    #   - Never: Prevent the cursor from ever blinking
-    #   - Off: Disable blinking by default
-    #   - On: Enable blinking by default
-    #   - Always: Force the cursor to always blink
-    #blinking: Off
-
-  # Vi mode cursor style
-  #
-  # If the vi mode cursor style is `None` or not specified, it will fall back to
-  # the style of the active value of the normal cursor.
-  #
-  # See `cursor.style` for available options.
-  vi_mode_style: Underline
-
-  # Cursor blinking interval in milliseconds.
-  #blink_interval: 750
-
-  # If this is `true`, the cursor will be rendered as a hollow box when the
-  # window is not focused.
-  #unfocused_hollow: true
-
-  # Thickness of the cursor relative to the cell width as floating point number
-  # from `0.0` to `1.0`.
-  #thickness: 0.15
-
-# Live config reload (changes require restart)
-#live_config_reload: true
-
-# Shell
-#
-# You can set `shell.program` to the path of your favorite shell, e.g.
-# `/bin/fish`. Entries in `shell.args` are passed unmodified as arguments to the
-# shell.
-#
-# Default:
-#   - (macOS) /bin/bash --login
-#   - (Linux/BSD) user login shell
-#   - (Windows) powershell
-#shell:
-#  program: /bin/bash
-#  args:
-#    - --login
-
-# Startup directory
-#
-# Directory the shell is started in. If this is unset, or `None`, the working
-# directory of the parent process will be used.
-#working_directory: None
-
-# WinPTY backend (Windows only)
-#
-# Alacritty defaults to using the newer ConPTY backend if it is available,
-# since it resolves a lot of bugs and is quite a bit faster. If it is not
-# available, the WinPTY backend will be used instead.
-#
-# Setting this option to `true` makes Alacritty use the legacy WinPTY backend,
-# even if the ConPTY backend is available.
-#winpty_backend: false
-
-# Send ESC (\x1b) before characters when alt is pressed.
-#alt_send_esc: true
-
-#mouse:
-  # Click settings
-  #
-  # The `double_click` and `triple_click` settings control the time
-  # alacritty should wait for accepting multiple clicks as one double
-  # or triple click.
-  #double_click: { threshold: 300 }
-  #triple_click: { threshold: 300 }
-
-  # If this is `true`, the cursor is temporarily hidden when typing.
-  #hide_when_typing: false
-
-# Regex hints
-#
-# Terminal hints can be used to find text in the visible part of the terminal
-# and pipe it to other applications.
-hints:
-  # Keys used for the hint labels.
-  #alphabet: "jfkdls;ahgurieowpq"
-
-  # List with all available hints
-  #
-  # Each hint must have a `regex` and either an `action` or a `command` field.
-  # The fields `mouse`, `binding` and `post_processing` are optional.
-  #
-  # The fields `command`, `binding.key`, `binding.mods` and `mouse.mods` accept
-  # the same values as they do in the `key_bindings` section.
-  #
-  # The `mouse.enabled` field controls if the hint should be underlined while
-  # the mouse with all `mouse.mods` keys held or the vi mode cursor is above it.
-  #
-  # If the `post_processing` field is set to `true`, heuristics will be used to
-  # shorten the match if there are characters likely not to be part of the hint
-  # (e.g. a trailing `.`). This is most useful for URIs.
-  #
-  # Values for `action`:
-  #   - Copy
-  #       Copy the hint's text to the clipboard.
-  #   - Paste
-  #       Paste the hint's text to the terminal or search.
-  #   - Select
-  #       Select the hint's text.
-  #   - MoveViModeCursor
-  #       Move the vi mode cursor to the beginning of the hint.
-  enabled:
-   - regex: "(mailto:|gemini:|gopher:|https:|http:|news:|file:|git:|ssh:|ftp:)\
-             [^\u0000-\u001F\u007F-\u009F<>\"\\s{-}\\^⟨⟩`]+"
-     command: xdg-open
-     post_processing: true
-     mouse:
-       enabled: true
-       mods: Control
-     binding:
-       key: F
-       mods: Control|Alt
-
-# Mouse bindings
-#
-# Mouse bindings are specified as a list of objects, much like the key
-# bindings further below.
-#
-# To trigger mouse bindings when an application running within Alacritty
-# captures the mouse, the `Shift` modifier is automatically added as a
-# requirement.
-#
-# Each mouse binding will specify a:
-#
-# - `mouse`:
-#
-#   - Middle
-#   - Left
-#   - Right
-#   - Numeric identifier such as `5`
-#
-# - `action` (see key bindings)
-#
-# And optionally:
-#
-# - `mods` (see key bindings)
-#mouse_bindings:
-#  - { mouse: Middle, action: PasteSelection }
-
-# Key bindings
-#
-# Key bindings are specified as a list of objects. For example, this is the
-# default paste binding:
-#
-# `- { key: V, mods: Control|Shift, action: Paste }`
-#
-# Each key binding will specify a:
-#
-# - `key`: Identifier of the key pressed
-#
-#    - A-Z
-#    - F1-F24
-#    - Key0-Key9
-#
-#    A full list with available key codes can be found here:
-#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
-#
-#    Instead of using the name of the keys, the `key` field also supports using
-#    the scancode of the desired key. Scancodes have to be specified as a
-#    decimal number. This command will allow you to display the hex scancodes
-#    for certain keys:
-#
-#       `showkey --scancodes`.
-#
-# Then exactly one of:
-#
-# - `chars`: Send a byte sequence to the running application
-#
-#    The `chars` field writes the specified string to the terminal. This makes
-#    it possible to pass escape sequences. To find escape codes for bindings
-#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
-#    of tmux. Note that applications use terminfo to map escape sequences back
-#    to keys. It is therefore required to update the terminfo when changing an
-#    escape sequence.
-#
-# - `action`: Execute a predefined action
-#
-#   - ToggleViMode
-#   - SearchForward
-#       Start searching toward the right of the search origin.
-#   - SearchBackward
-#       Start searching toward the left of the search origin.
-#   - Copy
-#   - Paste
-#   - IncreaseFontSize
-#   - DecreaseFontSize
-#   - ResetFontSize
-#   - ScrollPageUp
-#   - ScrollPageDown
-#   - ScrollHalfPageUp
-#   - ScrollHalfPageDown
-#   - ScrollLineUp
-#   - ScrollLineDown
-#   - ScrollToTop
-#   - ScrollToBottom
-#   - ClearHistory
-#       Remove the terminal's scrollback history.
-#   - Hide
-#       Hide the Alacritty window.
-#   - Minimize
-#       Minimize the Alacritty window.
-#   - Quit
-#       Quit Alacritty.
-#   - ToggleFullscreen
-#   - SpawnNewInstance
-#       Spawn a new instance of Alacritty.
-#   - ClearLogNotice
-#       Clear Alacritty's UI warning and error notice.
-#   - ClearSelection
-#       Remove the active selection.
-#   - ReceiveChar
-#   - None
-#
-# - Vi mode exclusive actions:
-#
-#   - Open
-#       Perform the action of the first matching hint under the vi mode cursor
-#       with `mouse.enabled` set to `true`.
-#   - ToggleNormalSelection
-#   - ToggleLineSelection
-#   - ToggleBlockSelection
-#   - ToggleSemanticSelection
-#       Toggle semantic selection based on `selection.semantic_escape_chars`.
-#
-# - Vi mode exclusive cursor motion actions:
-#
-#   - Up
-#       One line up.
-#   - Down
-#       One line down.
-#   - Left
-#       One character left.
-#   - Right
-#       One character right.
-#   - First
-#       First column, or beginning of the line when already at the first column.
-#   - Last
-#       Last column, or beginning of the line when already at the last column.
-#   - FirstOccupied
-#       First non-empty cell in this terminal row, or first non-empty cell of
-#       the line when already at the first cell of the row.
-#   - High
-#       Top of the screen.
-#   - Middle
-#       Center of the screen.
-#   - Low
-#       Bottom of the screen.
-#   - SemanticLeft
-#       Start of the previous semantically separated word.
-#   - SemanticRight
-#       Start of the next semantically separated word.
-#   - SemanticLeftEnd
-#       End of the previous semantically separated word.
-#   - SemanticRightEnd
-#       End of the next semantically separated word.
-#   - WordLeft
-#       Start of the previous whitespace separated word.
-#   - WordRight
-#       Start of the next whitespace separated word.
-#   - WordLeftEnd
-#       End of the previous whitespace separated word.
-#   - WordRightEnd
-#       End of the next whitespace separated word.
-#   - Bracket
-#       Character matching the bracket at the cursor's location.
-#   - SearchNext
-#       Beginning of the next match.
-#   - SearchPrevious
-#       Beginning of the previous match.
-#   - SearchStart
-#       Start of the match to the left of the vi mode cursor.
-#   - SearchEnd
-#       End of the match to the right of the vi mode cursor.
-#
-# - Search mode exclusive actions:
-#   - SearchFocusNext
-#       Move the focus to the next search match.
-#   - SearchFocusPrevious
-#       Move the focus to the previous search match.
-#   - SearchConfirm
-#   - SearchCancel
-#   - SearchClear
-#       Reset the search regex.
-#   - SearchDeleteWord
-#       Delete the last word in the search regex.
-#   - SearchHistoryPrevious
-#       Go to the previous regex in the search history.
-#   - SearchHistoryNext
-#       Go to the next regex in the search history.
-#
-# - macOS exclusive actions:
-#   - ToggleSimpleFullscreen
-#       Enter fullscreen without occupying another space.
-#
-# - Linux/BSD exclusive actions:
-#
-#   - CopySelection
-#       Copy from the selection buffer.
-#   - PasteSelection
-#       Paste from the selection buffer.
-#
-# - `command`: Fork and execute a specified command plus arguments
-#
-#    The `command` field must be a map containing a `program` string and an
-#    `args` array of command line parameter strings. For example:
-#       `{ program: "alacritty", args: ["-e", "vttest"] }`
-#
-# And optionally:
-#
-# - `mods`: Key modifiers to filter binding actions
-#
-#    - Command
-#    - Control
-#    - Option
-#    - Super
-#    - Shift
-#    - Alt
-#
-#    Multiple `mods` can be combined using `|` like this:
-#       `mods: Control|Shift`.
-#    Whitespace and capitalization are relevant and must match the example.
-#
-# - `mode`: Indicate a binding for only specific terminal reported modes
-#
-#    This is mainly used to send applications the correct escape sequences
-#    when in different modes.
-#
-#    - AppCursor
-#    - AppKeypad
-#    - Search
-#    - Alt
-#    - Vi
-#
-#    A `~` operator can be used before a mode to apply the binding whenever
-#    the mode is *not* active, e.g. `~Alt`.
-#
-# Bindings are always filled by default, but will be replaced when a new
-# binding with the same triggers is defined. To unset a default binding, it can
-# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
-# a no-op if you do not wish to receive input characters for that binding.
-#
-# If the same trigger is assigned to multiple actions, all of them are executed
-# in the order they were defined in.
-key_bindings:
-  #- { key: Paste,                                       action: Paste          }
-  #- { key: Copy,                                        action: Copy           }
-  #- { key: L,         mods: Control,                    action: ClearLogNotice }
-  #- { key: L,         mods: Control, mode: ~Vi|~Search, chars: "\x0c"          }
-  #- { key: PageUp,    mods: Shift,   mode: ~Alt,        action: ScrollPageUp,  }
-  #- { key: PageDown,  mods: Shift,   mode: ~Alt,        action: ScrollPageDown }
-  #- { key: Home,      mods: Shift,   mode: ~Alt,        action: ScrollToTop,   }
-  #- { key: End,       mods: Shift,   mode: ~Alt,        action: ScrollToBottom }
-
-  # Vi Mode
-  #- { key: Space,  mods: Shift|Control, mode: Vi|~Search, action: ScrollToBottom          }
-  - { key: Space,  mods: Alt|Control, mode: ~Search,    action: ToggleViMode            }
-  #- { key: Escape,                      mode: Vi|~Search, action: ClearSelection          }
-  #- { key: I,                           mode: Vi|~Search, action: ScrollToBottom          }
-  #- { key: I,                           mode: Vi|~Search, action: ToggleViMode            }
-  #- { key: C,      mods: Control,       mode: Vi|~Search, action: ToggleViMode            }
-  #- { key: Y,      mods: Control,       mode: Vi|~Search, action: ScrollLineUp            }
-  #- { key: E,      mods: Control,       mode: Vi|~Search, action: ScrollLineDown          }
-  #- { key: G,                           mode: Vi|~Search, action: ScrollToTop             }
-  #- { key: G,      mods: Shift,         mode: Vi|~Search, action: ScrollToBottom          }
-  #- { key: B,      mods: Control,       mode: Vi|~Search, action: ScrollPageUp            }
-  #- { key: F,      mods: Control,       mode: Vi|~Search, action: ScrollPageDown          }
-  - { key: K,      mods: Control,       mode: Vi|~Search, action: ScrollHalfPageUp        }
-  - { key: J,      mods: Control,       mode: Vi|~Search, action: ScrollHalfPageDown      }
-  #- { key: Y,                           mode: Vi|~Search, action: Copy                    }
-  #- { key: Y,                           mode: Vi|~Search, action: ClearSelection          }
-  #- { key: Copy,                        mode: Vi|~Search, action: ClearSelection          }
-  #- { key: V,                           mode: Vi|~Search, action: ToggleNormalSelection   }
-  #- { key: V,      mods: Shift,         mode: Vi|~Search, action: ToggleLineSelection     }
-  #- { key: V,      mods: Control,       mode: Vi|~Search, action: ToggleBlockSelection    }
-  #- { key: V,      mods: Alt,           mode: Vi|~Search, action: ToggleSemanticSelection }
-  #- { key: Return,                      mode: Vi|~Search, action: Open                    }
-  #- { key: K,                           mode: Vi|~Search, action: Up                      }
-  #- { key: J,                           mode: Vi|~Search, action: Down                    }
-  #- { key: H,                           mode: Vi|~Search, action: Left                    }
-  #- { key: L,                           mode: Vi|~Search, action: Right                   }
-  #- { key: Up,                          mode: Vi|~Search, action: Up                      }
-  #- { key: Down,                        mode: Vi|~Search, action: Down                    }
-  #- { key: Left,                        mode: Vi|~Search, action: Left                    }
-  #- { key: Right,                       mode: Vi|~Search, action: Right                   }
-  #- { key: Key0,                        mode: Vi|~Search, action: First                   }
-  #- { key: Key4,   mods: Shift,         mode: Vi|~Search, action: Last                    }
-  #- { key: Key6,   mods: Shift,         mode: Vi|~Search, action: FirstOccupied           }
-  #- { key: H,      mods: Shift,         mode: Vi|~Search, action: High                    }
-  #- { key: M,      mods: Shift,         mode: Vi|~Search, action: Middle                  }
-  #- { key: L,      mods: Shift,         mode: Vi|~Search, action: Low                     }
-  #- { key: B,                           mode: Vi|~Search, action: SemanticLeft            }
-  #- { key: W,                           mode: Vi|~Search, action: SemanticRight           }
-  #- { key: E,                           mode: Vi|~Search, action: SemanticRightEnd        }
-  #- { key: B,      mods: Shift,         mode: Vi|~Search, action: WordLeft                }
-  #- { key: W,      mods: Shift,         mode: Vi|~Search, action: WordRight               }
-  #- { key: E,      mods: Shift,         mode: Vi|~Search, action: WordRightEnd            }
-  #- { key: Key5,   mods: Shift,         mode: Vi|~Search, action: Bracket                 }
-  #- { key: Slash,                       mode: Vi|~Search, action: SearchForward           }
-  #- { key: Slash,  mods: Shift,         mode: Vi|~Search, action: SearchBackward          }
-  #- { key: N,                           mode: Vi|~Search, action: SearchNext              }
-  #- { key: N,      mods: Shift,         mode: Vi|~Search, action: SearchPrevious          }
-
-  # Search Mode
-  #- { key: Return,                mode: Search|Vi,  action: SearchConfirm         }
-  #- { key: Escape,                mode: Search,     action: SearchCancel          }
-  #- { key: C,      mods: Control, mode: Search,     action: SearchCancel          }
-  #- { key: U,      mods: Control, mode: Search,     action: SearchClear           }
-  #- { key: W,      mods: Control, mode: Search,     action: SearchDeleteWord      }
-  #- { key: P,      mods: Control, mode: Search,     action: SearchHistoryPrevious }
-  #- { key: N,      mods: Control, mode: Search,     action: SearchHistoryNext     }
-  #- { key: Up,                    mode: Search,     action: SearchHistoryPrevious }
-  #- { key: Down,                  mode: Search,     action: SearchHistoryNext     }
-  #- { key: Return,                mode: Search|~Vi, action: SearchFocusNext       }
-  #- { key: Return, mods: Shift,   mode: Search|~Vi, action: SearchFocusPrevious   }
-
-  # (Windows, Linux, and BSD only)
-  - { key: V,              mods: Control|Alt, mode: ~Vi,        action: Paste            }
-  - { key: C,              mods: Control|Alt,                   action: Copy             }
-  - { key: F,              mods: Control|Alt, mode: ~Search,    action: SearchForward    }
-  - { key: B,              mods: Control|Alt, mode: ~Search,    action: SearchBackward   }
-  - { key: C,              mods: Control|Alt, mode: Vi|~Search, action: ClearSelection   }
-  #- { key: Insert,         mods: Shift,                           action: PasteSelection   }
-  #- { key: Key0,           mods: Control,                         action: ResetFontSize    }
-  #- { key: Equals,         mods: Control,                         action: IncreaseFontSize }
-  #- { key: Plus,           mods: Control,                         action: IncreaseFontSize }
-  #- { key: NumpadAdd,      mods: Control,                         action: IncreaseFontSize }
-  #- { key: Minus,          mods: Control,                         action: DecreaseFontSize }
-  #- { key: NumpadSubtract, mods: Control,                         action: DecreaseFontSize }
-
-  # (Windows only)
-  #- { key: Return,   mods: Alt,           action: ToggleFullscreen }
-
-  # (macOS only)
-  #- { key: K,              mods: Command, mode: ~Vi|~Search, chars: "\x0c"                 }
-  #- { key: K,              mods: Command, mode: ~Vi|~Search, action: ClearHistory          }
-  #- { key: Key0,           mods: Command,                    action: ResetFontSize         }
-  #- { key: Equals,         mods: Command,                    action: IncreaseFontSize      }
-  #- { key: Plus,           mods: Command,                    action: IncreaseFontSize      }
-  #- { key: NumpadAdd,      mods: Command,                    action: IncreaseFontSize      }
-  #- { key: Minus,          mods: Command,                    action: DecreaseFontSize      }
-  #- { key: NumpadSubtract, mods: Command,                    action: DecreaseFontSize      }
-  #- { key: V,              mods: Command,                    action: Paste                 }
-  #- { key: C,              mods: Command,                    action: Copy                  }
-  #- { key: C,              mods: Command, mode: Vi|~Search,  action: ClearSelection        }
-  #- { key: H,              mods: Command,                    action: Hide                  }
-  #- { key: H,              mods: Command|Alt,                action: HideOtherApplications }
-  #- { key: M,              mods: Command,                    action: Minimize              }
-  #- { key: Q,              mods: Command,                    action: Quit                  }
-  #- { key: W,              mods: Command,                    action: Quit                  }
-  #- { key: N,              mods: Command,                    action: SpawnNewInstance      }
-  #- { key: F,              mods: Command|Control,            action: ToggleFullscreen      }
-  #- { key: F,              mods: Command, mode: ~Search,     action: SearchForward         }
-  #- { key: B,              mods: Command, mode: ~Search,     action: SearchBackward        }
-
-#debug:
-  # Display the time it takes to redraw each frame.
-  #render_timer: false
-
-  # Keep the log file after quitting Alacritty.
-  #persistent_logging: false
-
-  # Log level
-  #
-  # Values for `log_level`:
-  #   - Off
-  #   - Error
-  #   - Warn
-  #   - Info
-  #   - Debug
-  #   - Trace
-  #log_level: Warn
-
-  # Print all received window events.
-  #print_events: false

config/automatrop/host_vars/pindakaas.geoffrey.frogeye.fr

@@ -1,16 +0,0 @@
-root_access: yes
-display_server: "x11"
-dev_stuffs:
-  - shell
-  - network
-  - ansible
-  - python
-has_battery: yes
-encrypt_home_stacked_fs: yes
-extensions:
-  - g
-  - gh
-x11_screens:
-  - DP-1
-  - eDP-1
-max_video_height: 720

config/automatrop/playbooks/default.yml

@@ -1,36 +0,0 @@
----
-- name: Default
-  hosts: all
-  roles:
-    - role: facts
-      tags: facts
-    - role: access
-      tags: access
-      when: root_access
-    - role: software
-      tags: software
-    - role: system
-      tags: system
-      when: root_access
-    - role: ecryptfs_automount
-      tags: ecryptfs_automount
-      when: encrypt_home_stacked_fs
-    - role: dotfiles
-      tags: dotfiles
-    - role: vim
-      tags: vim
-    - role: gnupg
-      tags: gnupg
-    - role: mnussbaum.base16-builder-ansible # Required for desktop_environment
-      tags:
-        - color
-        - desktop_environment
-    - role: termux
-      tags: termux
-      when: termux
-    - role: desktop_environment
-      tags: desktop_environment
-      when: display_server
-    - role: extensions
-      tags: extensions
-# TODO Dependencies

config/automatrop/plugins/modules/aur

@@ -1 +0,0 @@
-Subproject commit 592c6d9841674211f904cf9ea2a951fca3fd5a80

config/automatrop/plugins/modules/gpg_key

@@ -1 +0,0 @@
-Subproject commit 435f8e6aea0ba9be482c4409db380868a23fea9c

config/automatrop/roles/access/tasks/main.yml

@@ -1,23 +0,0 @@
----
-- name: Set variables
-  ansible.builtin.set_fact:
-    manjaro: "{{ ansible_lsb.id == 'Manjaro' or ansible_lsb.id == 'Manjaro-ARM' }}"
-
-- name: Enable passwordless sudo access to wheel group (Others)
-  ansible.builtin.lineinfile:
-    path: /etc/sudoers
-    line: "%wheel ALL=(ALL) NOPASSWD: ALL"
-    regexp: "^#? *%wheel ALL=\\(ALL\\) NOPASSWD: ALL$"
-  become: true
-  when: not manjaro
-
-- name: Enable passwordless sudo access to wheel group (Manjaro)
-  ansible.builtin.copy:
-    content: "%wheel ALL=(ALL) NOPASSWD: ALL"
-    dest: /etc/sudoers.d/11-wheel-nopasswd
-    mode: u=rwx,g=rx,o=
-  when: manjaro
-  become: true
-# /etc/sudoers.d/10-installer is the same thing,
-# but **with** a password, and it's overwritten
-# with each upgrade of manjaro-system, hence this.

config/automatrop/roles/desktop_environment/default/main.yml

@@ -1 +0,0 @@
-base16_scheme: solarized-dark

config/automatrop/roles/desktop_environment/handlers/main.yml

@@ -1,16 +0,0 @@
----
-- name: Xrdb-reload
-  ansible.builtin.command: xrdb -I{{ ansible_env.HOME }} {{ ansible_env.HOME }}/.config/Xresources/main
-  listen: xrdb-reload
-- name: I3-reload
-  ansible.builtin.command: i3-msg reload
-  listen: i3-reload
-- name: Shell-reload
-  ansible.builtin.command: "{{ ansible_env.HOME }}/.local/bin/colorSchemeApply"
-  listen: shell-reload
-- name: Fzf-reload
-  ansible.builtin.shell: source {{ ansible_env.HOME }}/.local/bin/colorSchemeApplyFzf
-  listen: fzf-reload
-- name: Qutebrowser-reload
-  ansible.builtin.shell: "! pgrep qutebrowser || qutebrowser :config-source"
-  listen: qutebrowser-reload

config/automatrop/roles/desktop_environment/tasks/main.yml

@@ -1,179 +0,0 @@
----
-- name: Ensure directories for desktop applications are present
-  ansible.builtin.file:
-    state: directory
-    path: "{{ ansible_user_dir }}/{{ item }}"
-    mode: u=rwx,g=rx,o=rx
-  with_items:
-    - .config/Xresources
-    - .config/rofi
-    - .local/bin
-    - .local/share/fonts
-    - .config/qutebrowser
-    - .config/tridactyl/themes
-
-# Download fonts
-- name: Download Nerd fonts
-  ansible.builtin.get_url:
-    url: https://raw.githubusercontent.com/ryanoasis/nerd-fonts/704336735f576781b2a57b12a0c723e3316cbdec/patched-fonts/DejaVuSansMono/{{ item.folder }}/complete/{{
-      item.filename | urlencode }}
-    dest: "{{ ansible_user_dir }}/.local/share/fonts/{{ item.filename }}"
-    mode: u=rw,g=r,o=r
-  loop:
-    - filename: DejaVu Sans Mono Bold Nerd Font Complete Mono.ttf
-      folder: Bold
-    - filename: DejaVu Sans Mono Bold Oblique Nerd Font Complete Mono.ttf
-      folder: Bold-Italic
-    - filename: DejaVu Sans Mono Nerd Font Complete Mono.ttf
-      folder: Regular
-    - filename: DejaVu Sans Mono Oblique Nerd Font Complete Mono.ttf
-      folder: Italic
-
-- name: Download icon fonts
-  ansible.builtin.get_url:
-    url: https://raw.githubusercontent.com/FortAwesome/Font-Awesome/a8386aae19e200ddb0f6845b5feeee5eb7013687/fonts/fontawesome-webfont.ttf
-    dest: "{{ ansible_user_dir }}/.local/share/fonts/fontawesome-webfont.ttf"
-    mode: u=rw,g=r,o=r
-# TODO Either replace with ForkAwesome or Nerd Fonts
-
-- name: Install python dependencies for lemonbar
-  ansible.builtin.pip:
-    requirements: "{{ ansible_user_dir }}/.dotfiles/config/lemonbar/requirements.txt"
-    extra_args: --break-system-packages # It's fine, it's local anyways
-
-# Build a single color scheme and template and assign it to a variable
-- base16_builder:
-    scheme: "{{ base16_scheme }}"
-    template: # This requires https://github.com/mnussbaum/base16-builder-ansible/pull/6
-      - i3
-      - xresources
-      - rofi
-      - alacritty
-      - shell
-      - fzf
-      - vim
-      - qutebrowser
-      - tridactyl
-      - dunst
-  register: base16_schemes
-  tags:
-    - color
-    - i3
-
-- name: Configure Alacritty
-  ansible.builtin.template:
-    src: "{{ ansible_env.HOME }}/.config/alacritty/alacritty.yml.j2"
-    dest: "{{ ansible_env.HOME }}/.config/alacritty/alacritty.yml"
-    mode: u=rw,g=r,o=r
-  # Alacritty has live config reload, so no command to execute
-  # However, it doesn't work with yaml includes, hence the template
-  tags:
-    - color
-
-- name: Set base16 theme for Xresources
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['xresources']['xresources']['base16-' + base16_scheme + '-256.Xresources'] }}"
-    dest: "{{ ansible_env.HOME }}/.config/Xresources/theme"
-    mode: u=rw,g=r,o=r
-  notify:
-    - xrdb-reload
-  tags:
-    - color
-  when: display_server == 'x11'
-
-- name: Download base16 theme for qutebrowser
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['qutebrowser']['themes/minimal']['base16-' + base16_scheme + '.config.py'] }}"
-    dest: "{{ ansible_env.HOME }}/.config/qutebrowser/theme.py"
-    mode: u=rw,g=r,o=r
-  notify:
-    - qutebrowser-reload
-  tags:
-    - color
-
-- name: Download base16 theme for Tridactyl
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['tridactyl']['base16-' + base16_scheme + '.config.py'] }}"
-    # url: "https://raw.githubusercontent.com/bezmi/base16-tridactyl/master/base16-{{ base16_scheme }}.css"
-    dest: "{{ ansible_env.HOME }}/.config/tridactyl/themes/theme.css"
-    mode: u=rw,g=r,o=r
-  when: false # Not currently used
-  tags:
-    - color
-
-- name: Configure i3
-  ansible.builtin.template:
-    src: "{{ ansible_env.HOME }}/.config/i3/config.j2"
-    dest: "{{ ansible_env.HOME }}/.config/i3/config"
-    mode: u=rw,g=r,o=r
-  notify:
-    - i3-reload
-  tags:
-    - color
-    - i3
-  when: display_server == 'x11'
-
-- name: Set base16 theme for rofi
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['rofi']['themes']['base16-' + base16_scheme + '.' + item] }}"
-    dest: "{{ ansible_env.HOME }}/.config/rofi/theme.{{ item }}"
-    mode: u=rw,g=r,o=r
-  tags:
-    - color
-  loop:
-    - config
-    - rasi
-
-- name: Configure Dunst
-  ansible.builtin.template:
-    src: "{{ ansible_env.HOME }}/.config/dunst/dunstrc.j2"
-    dest: "{{ ansible_env.HOME }}/.config/dunst/dunstrc"
-    mode: u=rw,g=r,o=r
-  tags:
-    - color
-  when: display_server == 'x11'
-
-- name: Download base16 theme for fzf
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['fzf']['bash']['base16-' + base16_scheme + '.config'] }}"
-    dest: "{{ ansible_env.HOME }}/.local/bin/colorSchemeApplyFzf"
-    mode: u=rw,g=r,o=r
-  notify:
-    - fzf-reload
-  tags:
-    - color
-
-- name: Download base16 theme for shell
-  ansible.builtin.copy:
-    content: "{{ base16_schemes['schemes'][base16_scheme]['shell']['script']['base16-' + base16_scheme + '.sh'] }}"
-    dest: "{{ ansible_env.HOME }}/.local/bin/colorSchemeApply"
-    mode: u=rwx,g=rx,o=rx
-  notify:
-    - shell-reload
-  when: false # Not currently used
-  tags:
-    - color
-
-- name: Set used base16 theme for vim
-  ansible.builtin.copy:
-    path: "{{ ansible_env.HOME }}/.config/vim/colorscheme.vim"
-    mode: u=rw,g=r,o=r
-    content: colorscheme base16-{{ base16_scheme }}
-  when: false # Not currently used
-  tags:
-    - color
-
-- name: Enable user services
-  ansible.builtin.systemd:
-    name: "{{ item }}"
-    state: started
-    enabled: true
-    scope: user
-  loop:
-    - pulseaudio
-    - mpd
-  when: has_systemd
-
-# TODO bar (might change bar in the future, so...)
-# TODO highlight (there IS a template but the colors look different from vim and mostly the same from when there's no config)
-# TODO https://github.com/makuto/auto-base16-theme ? :P

config/automatrop/roles/dotfiles/handlers/main.yml

@@ -1,3 +0,0 @@
----
-- name: Install dotfiles
-  ansible.builtin.command: "{{ ansible_user_dir }}/.dotfiles/config/scripts/dotfiles install"

config/automatrop/roles/dotfiles/tasks/main.yml

@@ -1,32 +0,0 @@
----
-- name: Ensure directories for applications are present
-  ansible.builtin.file:
-    state: directory
-    path: "{{ ansible_user_dir }}/{{ item }}"
-    mode: u=rwx,g=rx,o=rx
-  with_items:
-    - .cache/zsh
-    - .cache/mpd
-    - .ssh
-    - .local/bin
-    - .ansible/collections/ansible_collections/geoffreyfrogeye
-
-- name: Install dotfiles repository
-  ansible.builtin.git:
-    repo: "{% if has_forge_access %}git@git.frogeye.fr:{% else %}https://git.frogeye.fr/{% endif %}geoffrey/dotfiles.git"
-    dest: "{{ ansible_user_dir }}/.dotfiles"
-    update: true
-  notify: install dotfiles
-  tags: dotfiles_repo
-# TODO Put actual dotfiles in a subdirectory of the repo, so we don't have to put everything in config
-
-- name: Register as Ansible collection
-  ansible.builtin.file:
-    state: link
-    src: "{{ ansible_user_dir }}/.dotfiles/config/automatrop"
-    path: "{{ ansible_user_dir }}/.ansible/collections/ansible_collections/geoffreyfrogeye/automatrop"
-
-- name: Install python dependencies for scripts
-  ansible.builtin.pip:
-    requirements: "{{ ansible_user_dir }}/.dotfiles/config/scripts/requirements.txt"
-    extra_args: --break-system-packages # It's fine, it's local anyways

config/automatrop/roles/ecryptfs_automount/README.md

@@ -1,17 +0,0 @@
-# ecryptfs_automount
-
-Configure pam to allow auto-mounting of encrypted home directories with eCryptfs.
-
-## Usage
-
-You still need to run the following for an user directory to be encrypted:
-
-```bash
-modprobe ecryptfs
-ecryptfs-migrate-home -u username
-```
-
-## Source
-
-https://wiki.archlinux.org/title/ECryptfs#Auto-mounting
-

config/automatrop/roles/ecryptfs_automount/tasks/main.yml

@@ -1,35 +0,0 @@
----
-- name: Setup pam_encryptfs auth
-  ansible.builtin.blockinfile:
-    path: /etc/pam.d/system-auth
-    block: |
-      auth       [success=1 default=ignore]  pam_succeed_if.so    service = systemd-user quiet
-      auth       required                    pam_ecryptfs.so      unwrap
-    insertafter: ^(auth\s+required\s+pam_unix.so|auth\s+\[default=die\]\s+pam_faillock.so\s+authfail)$
-    marker: "# {mark} AUTOMATROP ECRYPTFS_AUTOMOUNT AUTH"
-  become: true
-  notify:
-    - etc changed
-
-- name: Setup pam_encryptfs password
-  ansible.builtin.blockinfile:
-    path: /etc/pam.d/system-auth
-    block: |
-      password   optional                    pam_ecryptfs.so      unwrap
-    insertbefore: ^(password\s+required\s+pam_unix.so|-password\s+\[success=1\s+default=ignore\]\s+pam_systemd_home.so)$
-    marker: "# {mark} AUTOMATROP ECRYPTFS_AUTOMOUNT PASSWORD"
-  become: true
-  notify:
-    - etc changed
-
-- name: Setup pam_encryptfs session
-  ansible.builtin.blockinfile:
-    path: /etc/pam.d/system-auth
-    block: |
-      session    [success=1 default=ignore]  pam_succeed_if.so    service = systemd-user quiet
-      session    optional                    pam_ecryptfs.so      unwrap
-    insertafter: ^session\s+required\s+pam_unix.so$
-    marker: "# {mark} AUTOMATROP ECRYPTFS_AUTOMOUNT SESSION"
-  become: true
-  notify:
-    - etc changed

config/automatrop/roles/extensions/tasks/main.yml

@@ -1,14 +0,0 @@
----
-- name: Load extensions
-  ansible.builtin.include_role:
-    name: geoffreyfrogeye.{{ extension }}automatrop.entry
-  loop: "{{ extensions }}"
-  loop_control:
-    loop_var: extension
-  tags: always
-
-- name: Configure extensions rc sourcing
-  ansible.builtin.template:
-    src: extrc.sh.j2
-    dest: "{{ ansible_user_dir }}/.config/shell/extrc"
-    mode: u=rw,g=r,o=r

config/automatrop/roles/extensions/templates/extrc.sh.j2

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-{% for extension in extensions %}
-trysource ~/.config/{{ extension }}scripts/{{ extension }}profile
-{% endfor %}
-{# TODO Rename profile as rc, and add env #}
-{# TODO Put in non-linked path #}

config/automatrop/roles/facts/tasks/main.yml

@@ -1,21 +0,0 @@
----
-- name: Set facts
-  ansible.builtin.set_fact:
-    arch_based: "{{ ansible_distribution == 'Archlinux' }}"
-    arch: "{{ ansible_lsb.id == 'Arch' }}"
-    manjaro: "{{ ansible_lsb.id == 'Manjaro' or ansible_lsb.id == 'Manjaro-ARM' }}"
-    termux: "{{ ansible_distribution == 'OtherLinux' and ansible_python.executable == '/data/data/com.termux/files/usr/bin/python' }}"
-    debian: "{{ ansible_distribution == 'Debian' }}"
-    ubuntu: "{{ ansible_distribution == 'Ubuntu' }}"
-    junest: "{{ ansible_distribution == 'Archlinux' and ansible_is_chroot }}" # TODO Check if /etc/junest exists
-  tags:
-    - always
-
-- name: Set composed facts
-  ansible.builtin.set_fact:
-    debian_based: "{{ debian or ubuntu }}"
-    can_chown: "{{ not junest }}"
-    has_systemd: "{{ not junest }}"
-  tags:
-    - always
-# TODO Make this a real Ansible fact maybe?

config/automatrop/roles/gnupg/tasks/main.yml

@@ -1,52 +0,0 @@
----
-- name: Create GnuPG directory
-  ansible.builtin.file:
-    path: "{{ gnupghome }}"
-    state: directory
-    mode: u=rwx
-
-- name: Create GnuPG configuration files
-  ansible.builtin.file:
-    path: "{{ gnupghome }}/{{ item }}"
-    state: file
-    mode: u=rw,g=r,o=r
-  loop:
-    - gpg-agent.conf
-    - gpg.conf
-
-- name: Configure GnuPG
-  ansible.builtin.lineinfile:
-    path: "{{ gnupghome }}/gpg.conf"
-    regex: ^#?\s*{{ item.key }}\s
-    line: "{{ item.key }}{% if item.value is defined %} {{ item.value }}{% endif %}"
-  loop:
-    # Remove fluff
-    - key: no-greeting
-    - key: no-emit-version
-    - key: no-comments
-    # Output format that I prefer
-    - key: keyid-format
-      value: "0xlong"
-    # Show fingerprints
-    - key: with-fingerprint
-    # Make sure to show if key is invalid
-    # (should be default on most platform,
-    # but just to be sure)
-    - key: list-options
-      value: show-uid-validity
-    - key: verify-options
-      value: show-uid-validity
-    # Stronger algorithm (https://wiki.archlinux.org/title/GnuPG#Different_algorithm)
-    - key: personal-digest-preferences
-      value: SHA512
-    - key: cert-digest-algo
-      value: SHA512
-    - key: default-preference-list
-      value: SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed
-    - key: personal-cipher-preferences
-      value: TWOFISH CAMELLIA256 AES 3DES
-
-- name: Install Geoffrey Frogeye's key
-  gpg_key:
-    fpr: 4FBA930D314A03215E2CDB0A8312C8CAC1BAC289
-    trust: 5

config/automatrop/roles/gnupg/vars/main.yml

@@ -1,2 +0,0 @@
----
-gnupghome: "{{ ansible_user_dir }}/.config/gnupg"

config/automatrop/roles/kewlfft.aur/LICENSE

@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.

config/automatrop/roles/kewlfft.aur/README.md

@@ -1,126 +0,0 @@
-# Ansible AUR helper
-Ansible module to use some Arch User Repository (AUR) helpers as well as makepkg.
-
-The following helpers are supported and automatically selected, if present, in the order listed below:
-- [yay](https://github.com/Jguer/yay)
-- [paru](https://github.com/Morganamilo/paru)
-- [pacaur](https://github.com/E5ten/pacaur)
-- [trizen](https://github.com/trizen/trizen)
-- [pikaur](https://github.com/actionless/pikaur)
-- [aurman](https://github.com/polygamma/aurman) (discontinued)
-
-*makepkg* will be used if no helper was found or if it is explicitly specified:
-- [makepkg](https://wiki.archlinux.org/index.php/makepkg)
-
-## Options
-|Parameter      |Choices/**Default**                                          |Comments|
-|---            |---                                                          |---|
-|name           |                                                             |Name or list of names of the package(s) to install or upgrade.|
-|state          |**present**, latest                                          |Desired state of the package, 'present' skips operations if the package is already installed.|
-|upgrade        |yes, **no**                                                  |Whether or not to upgrade whole system.|
-|use            |**auto**, yay, paru, pacaur, trizen, pikaur, aurman, makepkg |The tool to use, 'auto' uses the first known helper found and makepkg as a fallback.|
-|extra_args     |**null**                                                     |A list of additional arguments to pass directly to the tool. Cannot be used in 'auto' mode.|
-|aur_only       |yes, **no**                                                  |Limit helper operation to the AUR.|
-|local_pkgbuild |Local directory with PKGBUILD, **null**                      |Only valid with makepkg or pikaur. Don't download the package from AUR. Build the package using a local PKGBUILD and the other build files.|
-|skip_pgp_check |yes, **no**                                                  |Only valid with makepkg. Skip PGP signatures verification of source file, useful when installing packages without GnuPG properly configured.|
-|ignore_arch    |yes, **no**                                                  |Only valid with makepkg. Ignore a missing or incomplete arch field, useful when the PKGBUILD does not have the arch=('yourarch') field.|
-
-### Note
-* Either *name* or *upgrade* is required, both cannot be used together.
-* In the *use*=*auto* mode, makepkg is used as a fallback if no known helper is found.
-
-## Installing
-### AUR package
-The [ansible-aur-git](https://aur.archlinux.org/packages/ansible-aur-git) package is available in the AUR.
-
-Note: The module is installed in `/usr/share/ansible/plugins/modules` which is one of the default module library paths.
-
-### Manual installation
-Just clone the *ansible-aur* repository into your user custom-module directory:
-```
-git clone https://github.com/kewlfft/ansible-aur.git ~/.ansible/plugins/modules/aur
-```
-
-### Ansible Galaxy
-*ansible-aur* is available in Galaxy which is a hub for sharing Ansible content. To download it, use:
-```
-ansible-galaxy install kewlfft.aur
-```
-
-Note: If this module is installed from Ansible Galaxy, you will need to list it explicitly in your playbook:
-```
-# playbook.yml
-- hosts: localhost
-  roles:
-  - kewlfft.aur
-  tasks:
-  - aur: name=package_name
-```
-
-or in your role:
-```
-# meta/main.yml
-dependencies:
-- kewlfft.aur
-```
-
-```
-# tasks/main.yml
-- aur: name=package_name
-```
-
-## Usage
-### Notes
-* The scope of this module is installation and update from the AUR; for package removal or for updates from the repositories, it is recommended to use the official *pacman* module.
-* The *--needed* parameter of the helper is systematically used, it means if a package is up-to-date, it is not built and reinstalled.
-
-### Create the "aur_builder" user
-While Ansible expects to SSH as root, makepkg or AUR helpers do not allow executing operations as root, they fail with "you cannot perform this operation as root". It is therefore recommended to create a user, which is non-root but has no need for password with pacman in sudoers, let's call it *aur_builder*.
-
-This user can be created in an Ansible task with the following actions:
-```
-- user:
-    name: aur_builder
-    create_home: no
-    group: wheel
-- lineinfile:
-    path: /etc/sudoers.d/11-install-aur_builder
-    line: 'aur_builder ALL=(ALL) NOPASSWD: /usr/bin/pacman'
-    create: yes
-    validate: 'visudo -cf %s'
-```
-
-### Examples
-Use it in a task, as in the following examples:
-```
-# Install trizen using makepkg, skip if it is already installed
-- aur: name=trizen use=makepkg state=present
-  become: yes
-  become_user: aur_builder
-
-# Install package_name using the first known helper found
-- aur: name=package_name
-  become: yes
-  become_user: aur_builder
-
-# Install package_name_1 and package_name_2 using yay
-- aur:
-    use: yay
-    name:
-      - package_name_1
-      - package_name_2
-
-# Upgrade the system using yay, only act on AUR packages.
-# Note: Dependency resolving will still include repository packages.
-- aur: upgrade=yes use=yay aur_only=yes
-
-# Install gnome-shell-extension-caffeine-git using pikaur and a local PKGBUILD.
-# Skip if it is already installed
-- aur:
-    name: gnome-shell-extension-caffeine-git
-    use: pikaur
-    local_pkgbuild: {{ role_path }}/files/gnome-shell-extension-caffeine-git
-    state: present
-  become: yes
-  become_user: aur_builder
-```

config/automatrop/roles/kewlfft.aur/library/aur.py

@@ -1,397 +0,0 @@
-#!/usr/bin/python
-
-# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
-
-from ansible.module_utils.basic import AnsibleModule
-from ansible.module_utils.urls import open_url
-import json
-import shlex
-import tarfile
-import os
-import os.path
-import shutil
-import tempfile
-import urllib.parse
-
-
-DOCUMENTATION = '''
----
-module: aur
-short_description: Manage packages from the AUR
-description:
-    - Manage packages from the Arch User Repository (AUR)
-author:
-    - Kewl <xrjy@nygb.rh.bet(rot13)>
-options:
-    name:
-        description:
-            - Name or list of names of the package(s) to install or upgrade.
-
-    state:
-        description:
-            - Desired state of the package.
-        default: present
-        choices: [ present, latest ]
-
-    upgrade:
-        description:
-            - Whether or not to upgrade whole system.
-        default: no
-        type: bool
-
-    use:
-        description:
-            - The tool to use, 'auto' uses the first known helper found and makepkg as a fallback.
-        default: auto
-        choices: [ auto, yay, paru, pacaur, trizen, pikaur, aurman, makepkg ]
-
-    extra_args:
-        description:
-            - Arguments to pass to the tool.
-              Requires that the 'use' option be set to something other than 'auto'.
-        type: str
-
-    skip_pgp_check:
-        description:
-            - Only valid with makepkg.
-              Skip PGP signatures verification of source file.
-              This is useful when installing packages without GnuPG (properly) configured.
-              Cannot be used unless use is set to 'makepkg'.
-        type: bool
-        default: no
-
-    ignore_arch:
-        description:
-            - Only valid with makepkg.
-              Ignore a missing or incomplete arch field, useful when the PKGBUILD does not have the arch=('yourarch') field.
-              Cannot be used unless use is set to 'makepkg'.
-        type: bool
-        default: no
-
-    aur_only:
-        description:
-            - Limit helper operation to the AUR.
-        type: bool
-        default: no
-
-    local_pkgbuild:
-        description:
-            - Only valid with makepkg or pikaur.
-              Directory with PKGBUILD and build files.
-              Cannot be used unless use is set to 'makepkg' or 'pikaur'.
-        type: path
-        default: no
-notes:
-  - When used with a `loop:` each package will be processed individually,
-    it is much more efficient to pass the list directly to the `name` option.
-'''
-
-RETURN = '''
-msg:
-    description: action that has been taken
-helper:
-    the helper that was actually used
-'''
-
-EXAMPLES = '''
-- name: Install trizen using makepkg, skip if trizen is already installed
-  aur: name=trizen use=makepkg state=present
-  become: yes
-  become_user: aur_builder
-'''
-
-def_lang = ['env', 'LC_ALL=C']
-
-use_cmd = {
-    'yay': ['yay', '-S', '--noconfirm', '--needed', '--cleanafter'],
-    'paru': ['paru', '-S', '--noconfirm', '--needed', '--cleanafter'],
-    'pacaur': ['pacaur', '-S', '--noconfirm', '--noedit', '--needed'],
-    'trizen': ['trizen', '-S', '--noconfirm', '--noedit', '--needed'],
-    'pikaur': ['pikaur', '-S', '--noconfirm', '--noedit', '--needed'],
-    'aurman': ['aurman', '-S', '--noconfirm', '--noedit', '--needed', '--skip_news', '--pgp_fetch', '--skip_new_locations'],
-    'makepkg': ['makepkg', '--syncdeps', '--install', '--noconfirm', '--needed']
-}
-
-use_cmd_local_pkgbuild = {
-    'pikaur': ['pikaur', '-P', '--noconfirm', '--noedit', '--needed', '--install'],
-    'makepkg': ['makepkg', '--syncdeps', '--install', '--noconfirm', '--needed']
-}
-
-has_aur_option = ['yay', 'paru', 'pacaur', 'trizen', 'pikaur', 'aurman']
-
-
-def package_installed(module, package):
-    """
-    Determine if the package is already installed
-    """
-    rc, _, _ = module.run_command(['pacman', '-Q', package], check_rc=False)
-    return rc == 0
-
-
-def check_packages(module, packages):
-    """
-    Inform the user what would change if the module were run
-    """
-    would_be_changed = []
-    diff = {
-        'before': '',
-        'after': '',
-    }
-
-    for package in packages:
-        installed = package_installed(module, package)
-        if not installed:
-            would_be_changed.append(package)
-            if module._diff:
-                diff['after'] += package + "\n"
-
-    if would_be_changed:
-        status = True
-        if len(packages) > 1:
-            message = '{} package(s) would be installed'.format(len(would_be_changed))
-        else:
-            message = 'package would be installed'
-    else:
-        status = False
-        if len(packages) > 1:
-            message = 'all packages are already installed'
-        else:
-            message = 'package is already installed'
-    module.exit_json(changed=status, msg=message, diff=diff)
-
-
-def build_command_prefix(use, extra_args, skip_pgp_check=False, ignore_arch=False, aur_only=False, local_pkgbuild=None):
-    """
-    Create the prefix of a command that can be used by the install and upgrade functions.
-    """
-    if local_pkgbuild:
-        command = def_lang + use_cmd_local_pkgbuild[use]
-    else:
-        command = def_lang + use_cmd[use]
-    if skip_pgp_check:
-        command.append('--skippgpcheck')
-    if ignore_arch:
-        command.append('--ignorearch')
-    if aur_only and use in has_aur_option:
-        command.append('--aur')
-    if local_pkgbuild and use != 'makepkg':
-        command.append(local_pkgbuild)
-    if extra_args:
-        command += shlex.split(extra_args)
-    return command
-
-
-def install_with_makepkg(module, package, extra_args, skip_pgp_check, ignore_arch, local_pkgbuild=None):
-    """
-    Install the specified package or a local PKGBUILD with makepkg
-    """
-    if not local_pkgbuild:
-        module.get_bin_path('fakeroot', required=True)
-        f = open_url('https://aur.archlinux.org/rpc/?v=5&type=info&arg={}'.format(urllib.parse.quote(package)))
-        result = json.loads(f.read().decode('utf8'))
-        if result['resultcount'] != 1:
-            return (1, '', 'package {} not found'.format(package))
-        result = result['results'][0]
-        f = open_url('https://aur.archlinux.org/{}'.format(result['URLPath']))
-    with tempfile.TemporaryDirectory() as tmpdir:
-        if local_pkgbuild:
-            shutil.copytree(local_pkgbuild, tmpdir, dirs_exist_ok=True)
-            command = build_command_prefix('makepkg', extra_args)
-            rc, out, err = module.run_command(command, cwd=tmpdir, check_rc=True)
-        else:
-            tar = tarfile.open(mode='r|*', fileobj=f)
-            tar.extractall(tmpdir)
-            tar.close()
-            command = build_command_prefix('makepkg', extra_args, skip_pgp_check=skip_pgp_check, ignore_arch=ignore_arch)
-            rc, out, err = module.run_command(command, cwd=os.path.join(tmpdir, result['Name']), check_rc=True)
-    return (rc, out, err)
-
-
-def install_local_package(module, package, use, extra_args, local_pkgbuild):
-    """
-    Install the specified package with a local PKGBUILD
-    """
-    with tempfile.TemporaryDirectory() as tmpdir:
-        shutil.copytree(local_pkgbuild, tmpdir, dirs_exist_ok=True)
-        command = build_command_prefix(use, extra_args, local_pkgbuild=tmpdir + '/PKGBUILD')
-        rc, out, err = module.run_command(command, check_rc=True)
-    return (rc, out, err)
-
-
-def check_upgrade(module, use):
-    """
-    Inform user how many packages would be upgraded
-    """
-    rc, stdout, stderr = module.run_command([use, '-Qu'], check_rc=True)
-    data = stdout.split('\n')
-    data.remove('')
-    module.exit_json(
-        changed=len(data) > 0,
-        msg="{} package(s) would be upgraded".format(len(data)),
-        helper=use,
-    )
-
-
-def upgrade(module, use, extra_args, aur_only):
-    """
-    Upgrade the whole system
-    """
-    assert use in use_cmd
-
-    command = build_command_prefix(use, extra_args, aur_only=aur_only)
-    command.append('-u')
-
-    rc, out, err = module.run_command(command, check_rc=True)
-
-    module.exit_json(
-        changed=not (out == '' or 'nothing to do' in out or 'No AUR updates found' in out),
-        msg='upgraded system',
-        helper=use,
-    )
-
-
-def install_packages(module, packages, use, extra_args, state, skip_pgp_check, ignore_arch, aur_only, local_pkgbuild):
-    """
-    Install the specified packages
-    """
-    if local_pkgbuild:
-        assert use in use_cmd_local_pkgbuild
-    else:
-        assert use in use_cmd
-
-    changed_iter = False
-
-    for package in packages:
-        if state == 'present':
-            if package_installed(module, package):
-                rc = 0
-                continue
-        if use == 'makepkg':
-            rc, out, err = install_with_makepkg(module, package, extra_args, skip_pgp_check, ignore_arch, local_pkgbuild)
-        elif local_pkgbuild:
-            rc, out, err = install_local_package(module, package, use, extra_args, local_pkgbuild)
-        else:
-            command = build_command_prefix(use, extra_args, aur_only=aur_only)
-            command.append(package)
-            rc, out, err = module.run_command(command, check_rc=True)
-
-        changed_iter = changed_iter or not (out == '' or '-- skipping' in out or 'nothing to do' in out)
-
-    message = 'installed package(s)' if changed_iter else 'package(s) already installed'
-
-    module.exit_json(
-        changed=changed_iter,
-        msg=message if not rc else err,
-        helper=use,
-        rc=rc,
-    )
-
-
-def make_module():
-    module = AnsibleModule(
-        argument_spec={
-            'name': {
-                'type': 'list',
-            },
-            'state': {
-                'default': 'present',
-                'choices': ['present', 'latest'],
-            },
-            'upgrade': {
-                'type': 'bool',
-            },
-            'use': {
-                'default': 'auto',
-                'choices': ['auto'] + list(use_cmd.keys()),
-            },
-            'extra_args': {
-                'default': None,
-                'type': 'str',
-            },
-            'skip_pgp_check': {
-                'default': False,
-                'type': 'bool',
-            },
-            'ignore_arch': {
-                'default': False,
-                'type': 'bool',
-            },
-            'aur_only': {
-                'default': False,
-                'type': 'bool',
-            },
-            'local_pkgbuild': {
-                'default': None,
-                'type': 'path',
-            },
-        },
-        mutually_exclusive=[['name', 'upgrade']],
-        required_one_of=[['name', 'upgrade']],
-        supports_check_mode=True
-    )
-
-    params = module.params
-
-    use = params['use']
-
-    if params['name'] == []:
-        module.fail_json(msg="'name' cannot be empty.")
-
-    if use == 'auto':
-        if params['extra_args'] is not None:
-            module.fail_json(msg="'extra_args' cannot be used with 'auto', a tool must be specified.")
-        use = 'makepkg'
-        # auto: select the first helper for which the bin is found
-        for k in use_cmd:
-            if module.get_bin_path(k):
-                use = k
-                break
-
-    if use != 'makepkg' and (params['skip_pgp_check'] or params['ignore_arch']):
-        module.fail_json(msg="This option is only available with 'makepkg'.")
-
-    if not (use in use_cmd_local_pkgbuild) and params['local_pkgbuild']:
-        module.fail_json(msg="This option is not available with '%s'" % use)
-
-    if params['local_pkgbuild'] and not os.path.isdir(params['local_pkgbuild']):
-        module.fail_json(msg="Directory %s not found" % (params['local_pkgbuild']))
-
-    if params['local_pkgbuild'] and not os.access(params['local_pkgbuild'] + '/PKGBUILD', os.R_OK):
-        module.fail_json(msg="PKGBUILD inside %s not readable" % (params['local_pkgbuild']))
-
-    if params.get('upgrade', False) and use == 'makepkg':
-        module.fail_json(msg="The 'upgrade' action cannot be used with 'makepkg'.")
-
-    return module, use
-
-
-def apply_module(module, use):
-    params = module.params
-
-    if params.get('upgrade', False):
-        if module.check_mode:
-            check_upgrade(module, use)
-        else:
-            upgrade(module, use, params['extra_args'], params['aur_only'])
-    else:
-        if module.check_mode:
-            check_packages(module, params['name'])
-        else:
-            install_packages(module,
-                             params['name'],
-                             use,
-                             params['extra_args'],
-                             params['state'],
-                             params['skip_pgp_check'],
-                             params['ignore_arch'],
-                             params['aur_only'],
-                             params['local_pkgbuild'])
-
-
-def main():
-    module, use = make_module()
-    apply_module(module, use)
-
-
-if __name__ == '__main__':
-    main()

config/automatrop/roles/kewlfft.aur/meta/.galaxy_install_info

@@ -1,2 +0,0 @@
-install_date: Sun Feb 21 21:18:27 2021
-version: master

config/automatrop/roles/kewlfft.aur/meta/main.yml

@@ -1,17 +0,0 @@
-galaxy_info:
-  author: kewlfft
-  role_name: aur
-  description: Ansible module to use some Arch User Repository (AUR) helpers as well as makepkg.
-  license: GPL-3.0-or-later
-  min_ansible_version: 2.0
-
-  # https://galaxy.ansible.com/api/v1/platforms/
-  platforms:
-  - name: ArchLinux
-    versions:
-    - any
-
-  galaxy_tags:
-  - aur
-
-dependencies: []

config/automatrop/roles/mnussbaum.base16-builder-ansible

@@ -1 +0,0 @@
-Subproject commit a977bb298fb9e1c057e0b2587dbd4d047e13f5bd

config/automatrop/roles/software/handlers/main.yml

@@ -1,24 +0,0 @@
----
-- name: Create and install meta package for Arch Linux
-  when: arch_based
-
-  block:
-    - name: Generate meta package PKGBUILD
-      ansible.builtin.template:
-        src: PKGBUILD.j2
-        dest: "{{ ansible_user_dir }}/.cache/automatrop/PKGBUILD"
-      listen: software changed
-
-    - name: Install meta package
-      aur:
-        name: automatrop-packages-{{ inventory_hostname_short }}
-        local_pkgbuild: "{{ ansible_user_dir }}/.cache/automatrop"
-        use: makepkg
-        state: latest
-      listen: software changed
-      when: root_access
-- name: Update pacman cache
-  community.general.pacman:
-    update_cache: true
-  become: true
-  when: arch_based

config/automatrop/roles/software/tasks/main.yml

@@ -1,224 +0,0 @@
----
-# TODO Install python if not done
-# Or maybe not, it requires a lot of automation for something that can be done
-# very quickly manually and is usually already installed
-
-- name: Install python-apt dependency for Termux
-  when: termux
-  vars:
-    version: 2.39
-
-  block:
-    # TODO Check if the correct version
-    - name: Check for DistUtilsExtra (Termux)
-      ansible.builtin.command: python -c 'import DistUtilsExtra'
-      changed_when: false
-  rescue:
-    - name: Create temporarty folder for DistUtilsExtra (Termux)
-      ansible.builtin.tempfile:
-        state: directory
-        suffix: python-distutils-extra
-        # path: /data/data/com.termux/files/usr/tmp/
-      register: pde_tempdir
-
-    - name: Download DistUtilsExtra (Termux)
-      ansible.builtin.get_url:
-        url: https://launchpad.net/python-distutils-extra/trunk/{{ version }}/+download/python-distutils-extra-{{ version }}.tar.gz
-        dest: "{{ pde_tempdir.path }}/python-distutils-extra.tar.gz"
-
-    - name: Extract DistUtilsExtra (Termux)
-      ansible.builtin.unarchive:
-        src: "{{ pde_tempdir.path }}/python-distutils-extra.tar.gz"
-        remote_src: true
-        dest: "{{ pde_tempdir.path }}"
-
-    - name: Install DistUtilsExtra (Termux)
-      ansible.builtin.command:
-        cmd: python3 setup.py install
-        chdir: "{{ pde_tempdir.path }}/python-distutils-extra-{{ version }}"
-- name: Install python-apt (Termux)
-  ansible.builtin.pip:
-    name: python-apt
-  when: termux
-
-# Collecting python-apt
-#   Using cached python-apt-0.7.8.tar.bz2 (49 kB)
-#     ERROR: Command errored out with exit status 1:
-#      command: /data/data/com.termux/files/usr/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/data/data/com.termux/files/usr/tmp/pip-install-dsga__i7/python-apt/setup.py'"'"'; __file__='"'"'/data/data/com.termux/files/usr/tmp/pip-install-dsga__i7/python-apt/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /data/data/com.termux/files/usr/tmp/pip-pip-egg-info-ptpprl0m
-#          cwd: /data/data/com.termux/files/usr/tmp/pip-install-dsga__i7/python-apt/
-#     Complete output (5 lines):
-#     Traceback (most recent call last):
-#       File "<string>", line 1, in <module>
-#       File "/data/data/com.termux/files/usr/tmp/pip-install-dsga__i7/python-apt/setup.py", line 11, in <module>
-#         string.split(parse_makefile("python/makefile")["APT_PKG_SRC"]))
-#     AttributeError: module 'string' has no attribute 'split'
-#     ----------------------------------------
-# ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
-# WARNING: You are using pip version 20.2.3; however, version 20.3.3 is available.
-# You should consider upgrading via the '/data/data/com.termux/files/usr/bin/python3 -m pip install --upgrade pip' command.
-
-# Arch configuration
-
-# TODO Patch sudo-fake so it allows using -u so `become` works
-
-- name: Enable multilib repo
-  ansible.builtin.lineinfile:
-    path: /etc/pacman.conf
-    regexp: ^#?\s*\[multilib\]$
-    line: "[multilib]"
-  become: true
-  when: arch_based and ansible_architecture == "x86_64"
-  notify: udpate pacman cache
-
-- name: Configure multilib repo
-  ansible.builtin.lineinfile:
-    path: /etc/pacman.conf
-    regexp: ^#?\s*Include\s*=\s*/etc/pacman.d/mirrorlist
-    line: Include = /etc/pacman.d/mirrorlist
-    insertafter: ^\[multilib\]$
-  become: true
-  when: arch_based and ansible_architecture == "x86_64"
-  notify: udpate pacman cache
-
-- name: Update cache if needed
-  ansible.builtin.meta: flush_handlers
-- name: Install ccache
-  community.general.pacman:
-    name: ccache
-    state: present
-    extra_args: --asdeps
-  become: true
-  when: arch_based
-
-- name: Enable makepkg color
-  ansible.builtin.replace:
-    path: /etc/makepkg.conf
-    regexp: ^BUILDENV=(.+)!color(.+)$
-    replace: BUILDENV=\1color\2
-  become: true
-  when: arch_based
-
-- name: Enable makepkg ccache
-  ansible.builtin.replace:
-    path: /etc/makepkg.conf
-    regexp: ^BUILDENV=(.+)!ccache(.+)$
-    replace: BUILDENV=\1ccache\2
-  become: true
-  when: arch_based
-
-- name: Remove -mtune from makepkg CFLAGS
-  ansible.builtin.replace:
-    path: /etc/makepkg.conf
-    regexp: ^#? *CFLAGS=(.+)-mtune=\S+\s(.*)$
-    replace: CFLAGS=\1\2
-  become: true
-  when: arch_based
-
-- name: Change -march to native from makepkg CFLAGS
-  ansible.builtin.replace:
-    path: /etc/makepkg.conf
-    regexp: ^#? *CFLAGS=(.+)-march=\S+(\s)(.*)$
-    replace: CFLAGS=\1-march=native\2\3
-  become: true
-  when: arch_based
-
-- name: Set makepkg MAKEFLAGS
-  ansible.builtin.replace:
-    path: /etc/makepkg.conf
-    regexp: ^#? *MAKEFLAGS=(.+)-j[0-9]+(.+)$
-    replace: MAKEFLAGS=\1-j{{ j }}\2
-  become: true
-  vars:
-    j: "{{ [ansible_processor_nproc - 1, 1] | max | int }}"
-  when: arch_based
-
-- name: Enable pacman ParallelDownloads
-  ansible.builtin.lineinfile:
-    path: /etc/pacman.conf
-    regexp: ^#?ParallelDownloads
-    line: ParallelDownloads = 5
-    insertafter: ^\[options\]$
-  become: true
-  when: arch_based
-
-- name: Enable pacman colors
-  ansible.builtin.lineinfile:
-    path: /etc/pacman.conf
-    regexp: ^#?Color
-    line: Color
-    insertafter: ^\[options\]$
-  become: true
-  when: arch_based
-
-- name: Enable pacman pac-man
-  ansible.builtin.lineinfile:
-    path: /etc/pacman.conf
-    regexp: ^#?ILoveCandy
-    line: ILoveCandy
-    insertafter: ^#?Color
-  become: true
-  when: arch_based
-
-# Install alternative package managers
-- name: Install dependencies for AUR helpers
-  community.general.pacman:
-    name:
-      - base-devel
-      - fakeroot
-  become: true
-  when: arch_based
-# Do not install sudo because maybe sudo-fake is installed (otherwise it conflicts)
-# It should already be installed already anyway
-
-- name: Install AUR package manager (Arch)
-  aur:
-    name: yay-bin
-  when: arch
-
-- name: Install AUR package manager (Manjaro)
-  community.general.pacman:
-    name: yay
-  become: true
-  when: manjaro
-# Not sure if regular Manjaro has yay in its community packages,
-# but Manjaro-ARM sure does
-
-- name: Create cache folder
-  ansible.builtin.file:
-    state: directory
-    mode: u=rwx,g=rx,o=rx
-    path: "{{ ansible_user_dir }}/.cache/automatrop"
-
-- name: Generate list of packages for package manager
-  ansible.builtin.set_fact:
-    packages: "{{ query('template', 'package_manager.j2')[0].split('\n')[:-1]|sort|unique }}"
-  tags: softwarelist
-
-- name: Install packages (Arch-based)
-  aur:
-    name: "{{ packages }}"
-    extra_args: --asdeps --needed
-    # Nothing is set as installed manually so it can
-    # be removed by dependency check.
-    # Current packages will be kept by the meta package
-    use: yay
-  notify: software changed
-  tags: softwarelist
-  when: arch_based
-
-- name: Check if list of packages changed
-  ansible.builtin.copy:
-    content: "{% for package in packages %}{{ package }}\n{% endfor %}"
-    dest: "{{ ansible_user_dir }}/.cache/automatrop/package_manager"
-  notify: software changed
-  tags: softwarelist
-
-# translate-shell
-# $ curl -L git.io/trans > ~/.local/bin/trans
-# $ chmod +x ~/.local/bin/trans
-
-# sct
-# $ TMP=$(mktemp /tmp/XXXXXXXXXX.c)
-# $ wget https://gist.githubusercontent.com/ajnirp/208c03d3aa7f02c743d2/raw/55bf3eed25739173d8be57b5179ed5542cf40ed6/sct.c -O $TMP
-# $ cc $TMP --std=c99 -lX11 -lXrandr -o $HOME/.local/bin/sct
-# $ rm $TMP

config/automatrop/roles/software/templates/PKGBUILD.j2

@@ -1,14 +0,0 @@
-# Maintainer: Geoffrey Frogeye
-
-pkgname=automatrop-packages-{{ inventory_hostname_short }}
-pkgver={{ ansible_date_time.iso8601_basic_short }}
-pkgrel=1
-pkgdesc='Metapackage for packages wanted by Geoffrey via automatrop for {{ inventory_hostname }}'
-url='https://git.frogeye.fr/geoffrey/dotfiles/src/branch/master/config/automatrop'
-arch=('any')
-license=('GPL')
-depends=(
-{% for package in packages %}
-  '{{ package }}'
-{% endfor %}
-)

config/automatrop/roles/software/templates/package_manager.j2

@@ -1,51 +0,0 @@
-{# Macros #}
-{% if debian_based %}
-{% set python_prefix = 'python3' %}
-{% set lib_suffix = '-common' %}
-{% else %}
-{% set python_prefix = 'python' %}
-{% set lib_suffix = '' %}
-{% endif %}
-{# Include essential snippets #}
-{% include 'snippets/pm_dotfiles_dependencies.j2' %}
-{% include 'snippets/pm_shell.j2' %}
-{% include 'snippets/pm_terminal_essentials.j2' %}
-{% include 'snippets/pm_remote.j2' %}
-{% include 'snippets/pm_disk_cleanup.j2' %}
-{% include 'snippets/pm_local_monitoring.j2' %}
-{% include 'snippets/pm_mpd.j2' %}
-{% include 'snippets/pm_multimedia_toolbox.j2' %}
-{% include 'snippets/pm_multimedia_common.j2' %}
-{% include 'snippets/pm_data_management.j2' %}
-{# Include rules-determined snippets #}
-{% if root_access %}
-{% include 'snippets/pm_system.j2' %}
-{% endif %}
-{% if display_server %}
-{% include 'snippets/pm_desktop_environment.j2' %}
-{% endif %}
-{% if termux %}
-{% include 'snippets/pm_termux.j2' %}
-{% else %}
-{% include 'snippets/pm_noandroid.j2' %}
-{% endif %}
-{% if software_full %}
-{% include 'snippets/pm_android_tools.j2' %}
-{% include 'snippets/pm_multimedia_editors.j2' %}
-{% include 'snippets/pm_download.j2' %}
-{% include 'snippets/pm_wine.j2' %}
-{% include 'snippets/pm_document.j2' %}
-{% endif %}
-{# Inclde dev snippets #}
-{% if dev_stuffs %}
-{% include 'snippets/pm_dev_common.j2' %}
-{% for dev_stuff in dev_stuffs %}
-{% include 'snippets/pm_dev_' + dev_stuff + '.j2' %}
-{% endfor %}
-{% endif %}
-{# Include custom snippets #}
-{% for software_snippet in software_snippets %}
-{% if software_snippet.startswith('pm_') %}
-{% include 'snippets/' + software_snippet + '.j2' %}
-{% endif %}
-{% endfor %}

config/automatrop/roles/software/templates/snippets/pm_android_tools.j2

@@ -1,11 +0,0 @@
-{#
-Stuff for accessing Android phones
-#}
-{% if not termux %}
-{% if arch_based %}
-android-tools
-android-udev
-{% elif debian_based %}
-adb
-{% endif %}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_data_management.j2

@@ -1,12 +0,0 @@
-{#
-Stuff to synchronize/backup data
-#}
-rsync
-borg
-syncthing
-{% if arch_based %}
-{% if ansible_architecture == 'x86_64' and can_chown %}
-freefilesync-bin
-{# Not worth the compilation if you can't have the binaries #}
-{% endif %}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_desktop_environment.j2

@@ -1,71 +0,0 @@
-{# Essential #}
-firefox
-qutebrowser
-{# Sound #}
-pulseaudio
-pacmixer
-{% if arch_based %}
-ttf-dejavu
-ttf-twemoji
-{% endif %}
-{% if arch_based %}
-xkb-qwerty-fr
-{% endif %}
-thunar
-gedit
-feh
-zathura
-zbar
-{% if arch_based %}
-zathura-pdf-mupdf
-{% elif debian_based %}
-zathura-pdf-poppler
-{% endif %}
-meld
-{{ python_prefix }}-magic
-{% if arch_based %}
-yubikey-touch-detector
-{% endif %}
-{% if display_server == "x11" %}
-i3-wm
-libgnomekbd{{ lib_suffix }}
-dunst
-i3lock
-numlockx
-rofi
-{% if arch_based %}
-rofimoji
-{% endif %}
-rxvt-unicode
-{% if arch_based %}
-urxvt-resize-font-git
-alacritty
-{% endif %}
-scrot
-simplescreenrecorder
-trayer
-unclutter
-{% if arch_based %}
-xautolock
-{% endif %}
-xclip
-{% if arch_based %}
-lemonbar-xft-git
-wireless_tools
-{% else %}
-lemonbar
-{% endif %}
-{# lemonbar dependency #}
-notmuch
-autorandr
-keynav
-sct
-xorg-xinit
-{% if arch_based %}
-xorg-xbacklight
-{% elif debian_based %}
-xbacklight
-{% endif %}
-{% elif display_server == "wayland" %}
-sway
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_dev_ansible.j2

@@ -1,4 +0,0 @@
-ansible
-ansible-lint
-ansible-language-server
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_c.j2

@@ -1,10 +0,0 @@
-{% if termux %}
-{# Otherwise installed by base-devel or equivalent #}
-make
-gcc
-{% endif %}
-cmake
-clang
-ccache
-gdb
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_common.j2

@@ -1,18 +0,0 @@
-perf
-git
-jq
-{% if arch_based %}
-ctags
-{% elif debian_based %}
-universal-ctags
-{% endif %}
-{% if not termux %}
-highlight
-{% endif %}
-{# For nvim's :Telescope live_grep #}
-ripgrep
-{# Offline documentation #}
-{# Relies on qt5-webkit which is a pain to compile
-zeal
-#}
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_docker.j2

@@ -1,3 +0,0 @@
-docker
-docker-compose
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_fpga.j2

@@ -1,6 +0,0 @@
-yosys
-iverilog
-ghdl
-{% if display_server %}
-gtkwave
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_dev_network.j2

@@ -1,14 +0,0 @@
-wget
-curl
-socat
-{% if arch_based %}
-bind
-{% else %}
-dnsutils
-{% endif %}
-whois
-nmap
-tcpdump
-{% if display_server %}
-wireshark-qt
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_dev_nix.j2

@@ -1,3 +0,0 @@
-nix
-rnix-lsp
-

config/automatrop/roles/software/templates/snippets/pm_dev_perl.j2

@@ -1,5 +0,0 @@
-{% if arch_based %}
-{# TODO Disabled because it currently doesn't build
-perl-perl-languageserver
-#}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_dev_php.j2

@@ -1 +0,0 @@
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_python.j2

@@ -1,12 +0,0 @@
-mypy
-{% if not arch_based %}
-black
-{# On arch it's installed as a dependency, also it's called python-black #}
-{% endif %}
-{% if arch_based %}
-python-lsp-server
-python-mypy-ls
-python-lsp-black
-{% endif %}
-ipython
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_shell.j2

@@ -1,2 +0,0 @@
-bash-language-server
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_dev_sql.j2

@@ -1 +0,0 @@
-sql-language-server

config/automatrop/roles/software/templates/snippets/pm_disk_cleanup.j2

@@ -1,13 +0,0 @@
-{#
-Program that essentially help you reduce disk usage
-#}
-jdupes
-duperemove
-optipng
-{% if debian_based %}
-libjpeg-turbo-progs
-{% else %}
-libjpeg-turbo
-{% endif %}
-reflac
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_document.j2

@@ -1,27 +0,0 @@
-{# Document utilities #}
-pandoc
-{% if arch_based %}
-texlive-bibtexextra
-texlive-core
-texlive-fontsextra
-texlive-formatsextra
-texlive-latexextra
-texlive-pictures
-texlive-pstricks
-texlive-science
-{% elif debian_based %}
-texlive-base
-texlive-lang-european
-{% endif %}
-pdftk
-{% if display_server %}
-{# Spell checking #}
-hunspell-en_gb
-hunspell-en_us
-hunspell-fr
-hunspell-nl
-{# libreoffice-extension-grammalecte-fr #}
-{% if arch_based %}
-libreoffice-extension-languagetool
-{% endif %}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_dotfiles_dependencies.j2

@@ -1,23 +0,0 @@
-{#
-Stuff that is required for scripts/programs of dotfiles to work properly
-#}
-coreutils
-bash
-grep
-sed
-tar
-openssl
-git
-wget
-curl
-{% if not termux %}
-{{ python_prefix }}-pip
-{# Termux already has pip via Python #}
-{% endif %}
-ansible
-{# Uncompressors #}
-unzip
-unrar
-p7zip
-{{ python_prefix }}-pystache
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_download.j2

@@ -1,12 +0,0 @@
-{#
-Programs used to download sutff off the internet
-#}
-wget
-curl
-rsync
-yt-dlp
-megatools
-transmission-cli
-{% if display_server %}
-transmission-qt
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_local_monitoring.j2

@@ -1,24 +0,0 @@
-{#
-Shell utilities to see what's going on on the system
-#}
-htop
-{% if root_access %}
-iotop
-iftop
-{% endif %}
-ncdu
-{% if not termux %}
-lsof
-{% endif %}
-strace
-pv
-progress
-{% if not termux %}
-speedtest-cli
-{% endif %}
-{% if arch_based %}
-pacman-contrib
-{% endif %}
-{% if has_battery %}
-powertop
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_mpd.j2

@@ -1,9 +0,0 @@
-{#
-To play music with Music Player Daemon
-#}
-mpd
-mpc
-{% if arch_based %}
-ashuffle-git
-vimpc-git
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_multimedia_common.j2

@@ -1,13 +0,0 @@
-{% if display_server %}
-gimp
-inkscape
-mpv
-{% if arch_based %}
-mpv-thumbnail-script
-{% endif %}
-{% if arch_based %}
-libreoffice-fresh
-{% elif debian_based %}
-libreoffice
-{% endif %}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_multimedia_editors.j2

@@ -1,12 +0,0 @@
-{#
-Big behemoth applications
-#}
-{% if display_server %}
-gimp
-inkscape
-darktable
-blender
-puddletag
-musescore
-audacity
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_multimedia_toolbox.j2

@@ -1,4 +0,0 @@
-ffmpeg
-sox
-imagemagick
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_noandroid.j2

@@ -1,30 +0,0 @@
-{#
-Stuff that isn't required on Android because there are apps for that
-#}
-{# Password handling #}
-pass
-pwgen
-{% if display_server %}
-rofi-pass
-{# TODO Try autopass.cr #}
-{% endif %}
-{# Mail #}
-isync
-msmtp
-notmuch
-neomutt
-lynx
-{% if not arch_based %}
-{# https://aur.archlinux.org/packages/tiv/#comment-812593 #}
-tiv
-{% endif %}
-{% if display_server %}
-thunderbird
-{% endif %}
-{# Organisation #}
-vdirsyncer
-khard
-khal
-todoman
-syncthing
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_remote.j2

@@ -1,6 +0,0 @@
-openssh
-wget
-rsync
-{% if display_server %}
-tigervnc
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_shell.j2

@@ -1,21 +0,0 @@
-{#
-Shell related stuff
-#}
-{# ZSH #}
-zsh
-antigen
-{% if arch_based %}
-{# Antigen takex care of the above for others platforms  #}
-zsh-autosuggestions
-zsh-completions
-zsh-history-substring-search
-zsh-syntax-highlighting
-{% endif %}
-tmux
-bash-completion
-fzf
-{% if arch_based and ansible_architecture == 'x86_64' %}
-powerline-go-bin
-{% else %}
-powerline-go
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_system.j2

@@ -1,16 +0,0 @@
-etckeeper
-{% if has_battery %}
-tlp
-{% endif %}
-dhcpcd
-wpa_supplicant
-chrony
-{% if encrypt_home_stacked_fs %}
-ecryptfs-utils
-{% endif %}
-kexec-tools
-openvpn
-{% if arch_based %}
-openvpn-update-resolv-conf-git
-{# TODO Other distributions #}
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_terminal_essentials.j2

@@ -1,24 +0,0 @@
-moreutils
-man
-visidata
-{% if can_chown or not arch_based %}
-insect
-{% endif %}
-translate-shell
-gnupg
-{# Editor #}
-{% if termux %}
-nvim
-{% else %}
-neovim
-{% endif %}
-{% if not termux %}
-{{ python_prefix }}-neovim
-{% endif %}
-{# Downloaders #}
-wget
-{# Uncompressors #}
-unzip
-unrar
-p7zip
-{# EOF #}

config/automatrop/roles/software/templates/snippets/pm_termux.j2

@@ -1,9 +0,0 @@
-{#
-Stuff that only makes sense on Termux
-#}
-{% if termux %}
-{% if root_access %}
-tsu
-{% endif %}
-termux-api
-{% endif %}

config/automatrop/roles/software/templates/snippets/pm_wine.j2

@@ -1,11 +0,0 @@
-{% if ansible_architecture == 'x86_64' %}
-wine
-{% if arch_based %}
-wine-gecko
-wine-mono
-mono
-lib32-libpulse
-{% elif debian_based %}
-mono-runtime
-{% endif %}
-{% endif %}

config/automatrop/roles/system/files/chrony.conf

@@ -1,7 +0,0 @@
-server 0.europe.pool.ntp.org offline
-server 1.europe.pool.ntp.org offline
-server 2.europe.pool.ntp.org offline
-server 3.europe.pool.ntp.org offline
-driftfile /etc/chrony.drift
-rtconutc
-rtcsync

config/automatrop/roles/system/files/dhcpcd.exit-hook

@@ -1,5 +0,0 @@
-if $if_up; then
-	chronyc online
-elif $if_down; then
-	chronyc offline
-fi

config/automatrop/roles/system/files/getty.service

@@ -1,2 +0,0 @@
-[Service]
-ExecStartPre=/bin/sh -c 'setleds +num < /dev/%I'

config/automatrop/roles/system/files/openvpn-client.service

@@ -1,11 +0,0 @@
-[Service]
-ExecStart=
-ExecStart=/usr/bin/openvpn --suppress-timestamps --nobind --config %i.conf --script-security 2 --up /etc/openvpn/update-resolv-conf --down /etc/openvpn/update-resolv-conf
-# The part before --script-security 2 might need upgrading from
-# /usr/lib/systemd/system/openvpn-client@.service if it was upgraded
-Restart=on-failure
-User=
-AmbiantCapabilities=
-# It's not pretty, but other script only work with systemd or call resolvconf with -p,
-# which doesn't work without a local DNS resolver
-# TODO Local DNS resolver sounds nice anyway

config/automatrop/roles/system/files/us_qwert_alt_numpad.patch

@@ -1,10 +0,0 @@
-***************
-*** 6,11 ****
---- 6,12 ----
-  {
-      include "us(basic)"
-      include "level3(ralt_switch)"
-+     include "keypad(oss)"
-
-      name[Group1]= "US keyboard with french symbols - AltGr combination";
-

config/automatrop/roles/system/files/wpa_supplicant.service

@@ -1,3 +0,0 @@
-[Service]
-ExecStart=
-ExecStart=/usr/bin/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant.conf -i%I

config/automatrop/roles/system/files/xorg/intel_backlight.conf

@@ -1,5 +0,0 @@
-Section "Device"
-    Identifier  "Intel Graphics"
-    Driver      "intel"
-    Option      "Backlight"  "intel_backlight"
-EndSection

config/automatrop/roles/system/files/xorg/joystick.conf

@@ -1,15 +0,0 @@
-Section "InputClass"
-        Identifier "joystick catchall"
-        MatchIsJoystick "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "joystick"
-        Option "StartKeysEnabled" "False"       #Disable mouse
-        Option "StartMouseEnabled" "False"      #support
-EndSection
-# Same thing for DualShock 4 touchpad
-Section "InputClass"
-       Identifier   "ds4-touchpad"
-       Driver       "libinput"
-       MatchProduct "Wireless Controller Touchpad"
-       Option       "Ignore" "True"
-EndSection

config/automatrop/roles/system/files/xorg/keyboard.conf

@@ -1,7 +0,0 @@
-Section "InputClass"
-        Identifier "system-keyboard"
-        MatchIsKeyboard "on"
-        Option "XkbLayout" "us_qwerty-fr"
-        #Option "XkbModel" "pc105+inet"
-        Option "XkbOptions" "terminate:ctrl_alt_bksp"
-EndSection

config/automatrop/roles/system/files/xorg/touchpad.conf

@@ -1,6 +0,0 @@
-Section "InputClass"
-    Identifier "touchpad"
-    Driver "libinput"
-    MatchIsTouchpad "on"
-    Option "Tapping" "on"
-EndSection

config/automatrop/roles/system/handlers/main.yaml

@@ -1,47 +0,0 @@
----
-- name: Create a etckeeper commit
-  ansible.builtin.command: etckeeper commit 'automatrop {{ ansible_date_time.iso8601 }}'
-  listen: etc changed
-  become: true
-  register: etckeeper_commit
-  failed_when: etckeeper_commit.rc != 0 and 'nothing to commit' not in etckeeper_commit.stdout
-  changed_when: "'nothing to commit' not in etckeeper_commit.stdout"
-
-- name: Restart chrony
-  ansible.builtin.systemd:
-    name: chronyd
-    state: restarted
-  listen: chrony reconfigured
-  become: true
-
-- name: Reload systemd daemon
-  ansible.builtin.systemd:
-    daemon_reload: true
-  listen: systemd changed
-  become: true
-
-- name: Restart wpa_supplicant
-  ansible.builtin.systemd:
-    name: wpa_supplicant@{{ item }}
-    state: restarted
-  become: true
-  loop: "{{ ansible_interfaces }}"
-  when: item.startswith('wl')
-  listen: wpa_supplicant changed
-# Could probably use something better like
-# listing /sys/class/ieee80211/*/device/net/
-
-- name: Warn about changed Wi-Fi setup
-  ansible.builtin.debug:
-    msg: The Wi-Fi configuration was changed, but not applied to let this playbook finish. A reboot is required.
-  listen: wifi setup changed
-
-- name: Warn about changed Panfrost config
-  ansible.builtin.debug:
-    msg: The Panfrost display driver configuration was changed, but needs a reboot to be applied.
-  listen: panfrost config changed
-
-- name: Reload systemd-logind
-  ansible.builtin.command: systemctl kill -s HUP systemd-logind
-  become: true
-  listen: systemd-logind config changed

config/automatrop/roles/system/tasks/main.yml

@@ -1,378 +0,0 @@
----
-# TODO For other distributions
-
-# Package are installed with --asdeps because they are needed
-
-# Etckeeper
-
-- name: Check if etckeeper is initialized
-  ansible.builtin.stat:
-    path: /etc/.git
-  register: etckeeper
-  become: true
-
-- name: Initialize etckeeper
-  ansible.builtin.command: etckeeper init
-  become: true
-  when: not etckeeper.stat.exists
-  changed_when: true
-
-- name: Configure git user.name for etckeeper
-  community.general.git_config:
-    scope: local
-    repo: /etc
-    name: "{{ item.name }}"
-    value: "{{ item.value }}"
-  loop:
-    - name: user.name
-      value: etckeeper on {{ inventory_hostname_short }}
-    - name: user.email
-      value: etckeeper@{{ inventory_hostname }}
-  become: true
-
-# Manjaro configuration
-
-- name: Remove Manjaro's pamac
-  community.general.pacman:
-    name: pamac
-    state: absent
-  become: true
-  when: arch_based and False # I'm trying to remember why I usually delete this thing
-
-# Verbose logging during boot
-
-- name: Check if using Uboot
-  ansible.builtin.stat:
-    path: /boot/extlinux/extlinux.conf
-  register: extlinux
-# This (and the following) was made with the Pinebook in mind,
-# not sure about compatibility
-
-- name: Remove non-tty1 console (Uboot)
-  ansible.builtin.replace:
-    path: /boot/extlinux/extlinux.conf
-    regexp: ^APPEND(.*) console=(?!tty1)\S+(.*)$
-    replace: APPEND\1\2
-  become: true
-  when: extlinux.stat.exists
-# Only one console= will be removed because regular expression are either hard
-# or somewhat limited. It's just what I need anyway
-
-- name: Remove bootsplash.bootfile (Uboot)
-  ansible.builtin.replace:
-    path: /boot/extlinux/extlinux.conf
-    regexp: ^APPEND(.*) bootsplash.bootfile=\S+(.*)$
-    replace: APPEND\1\2
-  become: true
-  when: extlinux.stat.exists
-
-- name: Remove bootsplash packages (Arch based)
-  community.general.pacman:
-    name:
-      - bootsplash-systemd
-      - bootsplash-theme-manjaro
-    state: absent
-  become: true
-  when: arch_based
-
-# Display Manager
-
-- name: Remove display manager packages (Arch based)
-  community.general.pacman:
-    name:
-      - sddm
-      - sddm-breath2-theme
-    state: absent
-  become: true
-  when: arch_based
-
-# Xorg configuration
-
-- name: Check if there is nvidia-xrun is installed
-  ansible.builtin.stat:
-    path: /etc/X11/nvidia-xorg.conf
-  register: nvidia_xrun
-  when: display_server == 'x11'
-
-- name: Add nvidia-xrun xorg config directory
-  ansible.builtin.set_fact:
-    xorg_common_config_dirs: "{{ xorg_default_config_dirs + xorg_nvidia_config_dirs }}"
-  vars:
-    xorg_default_config_dirs:
-      - /etc/X11/xorg.conf.d
-    xorg_nvidia_config_dirs: "{{ ['/etc/X11/nvidia-xorg.conf.d'] if nvidia_xrun.stat.exists else [] }}"
-  when: display_server == 'x11'
-
-- name: Configure Xorg keyboard layout
-  ansible.builtin.copy:
-    src: xorg/keyboard.conf
-    dest: "{{ item }}/00-keyboard.conf"
-  become: true
-  when: display_server == 'x11'
-  notify: etc changed
-  loop: "{{ xorg_common_config_dirs }}"
-
-- name: Use Alt keys for numpad
-  ansible.posix.patch:
-    src: us_qwert_alt_numpad.patch
-    dest: /usr/share/X11/xkb/symbols/us_qwerty-fr
-  become: true
-  when: display_server == 'x11'
-# This is not very nice but it's updated so infrequently that it's not worth
-# the trouble
-
-- name: Check if there is Intel backlight
-  ansible.builtin.stat:
-    path: /sys/class/backlight/intel_backlight
-  register: intel_backlight
-  when: display_server == 'x11'
-
-- name: Install Intel video drivers (Arch based)
-  community.general.pacman:
-    name: xf86-video-intel
-    # state: "{{ intel_backlight.stat.exists }}"
-    state: present
-  become: true
-  when: display_server == 'x11' and intel_backlight.stat.exists and arch_based
-  # TODO With software role? Would permit other distributions
-
-- name: Configure Xorg Intel backlight
-  ansible.builtin.copy:
-    src: xorg/intel_backlight.conf
-    dest: "{{ item }}/20-intel_backlight.conf"
-  become: true
-  when: display_server == 'x11' and intel_backlight.stat.exists
-  notify: etc changed
-  loop: "{{ xorg_common_config_dirs }}"
-
-- name: Configure Xorg touchpad behaviour
-  ansible.builtin.copy:
-    src: xorg/touchpad.conf
-    dest: "{{ item }}/30-touchpad.conf"
-  become: true
-  when: display_server == 'x11'
-  notify: etc changed
-  loop: "{{ xorg_common_config_dirs }}"
-
-- name: Configure Xorg joystick behaviour
-  ansible.builtin.copy:
-    src: xorg/joystick.conf
-    dest: "{{ item }}/50-joystick.conf"
-  become: true
-  when: display_server == 'x11'
-  notify: etc changed
-  loop: "{{ xorg_common_config_dirs }}"
-
-- name: List modules we're using
-  ansible.builtin.slurp:
-    src: /proc/modules
-  register: modules
-  when: display_server
-# Not sure the module will be loaded in early setup stages though
-
-- name: Make panfrost use OpenGL 3.3
-  ansible.builtin.lineinfile:
-    path: /etc/environment
-    line: PAN_MESA_DEBUG="gl3"
-    regexp: ^#? ?PAN_MESA_DEBUG=
-  become: true
-  when: display_server and using_panfrost
-  vars:
-    using_panfrost: "{{ 'panfrost' in (modules.content | b64decode) }}"
-  notify: panfrost config changed
-
-# Numlock on boot
-
-- name: Set numlock on boot
-  ansible.builtin.copy:
-    src: getty.service
-    dest: /etc/systemd/system/getty@.service.d/override.conf
-  become: true
-  notify:
-    - etc changed
-    - systemd changed
-  when: auto_numlock
-
-- name: Unset numlock on boot
-  ansible.builtin.file:
-    path: /etc/systemd/system/getty@.service.d/override.conf
-    state: absent
-  become: true
-  notify:
-    - etc changed
-    - systemd changed
-  when: not auto_numlock
-
-# TLP configuration
-
-- name: Start/enable TLP
-  ansible.builtin.systemd:
-    name: tlp
-    state: started
-    enabled: true
-  become: true
-  notify: etc changed
-
-# Network configuration
-
-- name: Start/enable dhcpcd
-  ansible.builtin.systemd:
-    name: dhcpcd
-    state: started
-    enabled: true
-  become: true
-  notify: etc changed
-
-- name: Configure wpa_supplicant
-  ansible.builtin.template:
-    src: wpa_supplicant.conf.j2
-    dest: /etc/wpa_supplicant/wpa_supplicant.conf
-  notify:
-    - etc changed
-    - wpa_supplicant changed
-  become: true
-  tags:
-    - wificonf
-
-- name: Prepare directory for wpa_supplicant service override
-  ansible.builtin.file:
-    path: /etc/systemd/system/wpa_supplicant@.service.d
-    state: directory
-    mode: u=rwx,g=rx,o=rx
-  become: true
-
-- name: Make wpa_supplicant use a common configuration file
-  ansible.builtin.copy:
-    src: wpa_supplicant.service
-    dest: /etc/systemd/system/wpa_supplicant@.service.d/override.conf
-  become: true
-  notify:
-    - etc changed
-    - systemd changed
-    - wifi setup changed
-
-- name: Disable wpa_supplicant for networkmanager
-  ansible.builtin.systemd:
-    name: wpa_supplicant
-    enabled: false
-  become: true
-  notify:
-    - etc changed
-    - wifi setup changed
-
-- name: Start/enable wpa_supplicant for interface
-  ansible.builtin.systemd:
-    name: wpa_supplicant@{{ item }}
-    enabled: true
-  become: true
-  notify:
-    - etc changed
-    - wifi setup changed
-  loop: "{{ ansible_interfaces }}"
-  when: item.startswith('wl')
-# Could probably use something better like
-# listing /sys/class/ieee80211/*/device/net/
-
-- name: Uninstall networkmanager
-  community.general.pacman:
-    name: networkmanager
-    state: absent
-    extra_args: --cascade --recursive
-  when: arch_based
-  become: true
-  notify:
-    - wifi setup changed
-
-- name: Mask systemd-networkd
-  ansible.builtin.systemd:
-    name: systemd-networkd
-    state: stopped
-    enabled: false
-    masked: true
-  become: true
-  notify: etc changed
-
-# Time synchronisation
-
-- name: Mask systemd-timesyncd
-  ansible.builtin.systemd:
-    name: systemd-timesyncd
-    state: stopped
-    enabled: false
-    masked: true
-  become: true
-  notify: etc changed
-
-- name: Configure chrony
-  ansible.builtin.copy:
-    src: chrony.conf
-    dest: /etc/chrony.conf
-  become: true
-  notify:
-    - etc changed
-    - chrony reconfigured
-# TODO More configuration, RTC configuration
-
-- name: Enable chronyd
-  ansible.builtin.systemd:
-    name: chronyd
-    enabled: true
-  become: true
-  notify:
-    - etc changed
-    - chrony reconfigured
-
-- name: Configure dhcpcd chrony hook
-  ansible.builtin.copy:
-    src: dhcpcd.exit-hook
-    dest: /etc/dhcpcd.exit-hook
-  become: true
-  notify: etc changed
-
-- name: Empty motd
-  ansible.builtin.copy:
-    content: ""
-    dest: /etc/motd
-    mode: u=rw,g=r,o=r
-  become: true
-  notify:
-    - etc changed
-
-# VPN configuration
-
-- name: Prepare directory for openvpn-client service override
-  ansible.builtin.file:
-    path: /etc/systemd/system/openvpn-client@.service.d
-    state: directory
-    mode: u=rwx,g=rx,o=rx
-  become: true
-
-- name: Make openvpn use hooks for resolvconf
-  ansible.builtin.copy:
-    src: openvpn-client.service
-    dest: /etc/systemd/system/openvpn-client@.service.d/override.conf
-  become: true
-  notify:
-    - etc changed
-    - systemd changed
-
-- name: Disable power button
-  ansible.builtin.lineinfile:
-    path: /etc/systemd/logind.conf
-    line: HandlePowerKey=ignore
-    regexp: ^#? *HandlePowerKey=
-    insertafter: ^\[Login\]$
-  become: true
-  notify: systemd-logind config changed
-  # Reason: I sometimes press it accidentally
-  # (hoping to start it when it's already started,
-  # or really accidentally on the Pinebook).
-  # Suspend would be nice, but it doesn't have the locker then
-
-# TODO Hibernation, if that's relevant
-# $ sudo blkid | grep 'TYPE="swap"'
-# $ sudoedit /etc/default/grub
-# Add resume=UUID=<UUID-of-swap-partition> to GRUB_CMDLINE_LINUX_DEFAULT
-# $ sudo grub-mkconfig -o /boot/grub/grub.cfg
-
-# TODO udevil

config/automatrop/roles/system/templates/wpa_supplicant.conf.j2

@@ -1,98 +0,0 @@
-# Giving configuration update rights to wpa_cli
-ctrl_interface=/run/wpa_supplicant
-ctrl_interface_group=wheel
-update_config=1
-
-# AP scanning
-ap_scan=1
-
-# ISO/IEC alpha2 country code in which the device is operating
-country=NL
-
-{% set password_store_path = lookup('env', 'PASSWORD_STORE_DIR') or ansible_user_dir + '/.password-store/' %}
-{% set wifi_pass_paths = query('fileglob', password_store_path + 'wifi/*.gpg') %}
-{% set names = wifi_pass_paths | map('regex_replace', '^.+/wifi/(.+).gpg$', '\\1') | sort%}
-{% for name in names %}
-{#
-community.general.passwordstore doesn't support path with spaces in it,
-so we're using a `ssid` attribute, which default to the names for SSIDs without space.
-#}
-{% set pass = lookup('community.general.passwordstore', 'wifi/' + name) %}
-{% set suffixes = lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=suffixes') or [''] %}
-{% set ssid = lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=ssid') or name %}
-{% set type = lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=type') or ('wpa' if pass else 'open') %}
-# {{ name }}
-{% for suffix in suffixes %}
-network={
-    ssid="{{ ssid }}{{ suffix }}"
-{% if type == 'wpa' %}
-    psk="{{ pass }}"
-{% elif type == 'wep' %}
-    key_mgmt=NONE
-    wep_key0={{ pass }}
-{% elif type == 'wpa-eap' %}
-    key_mgmt=WPA-EAP
-    eap={{ lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=eap') }}
-    identity="{{ lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=identity') }}"
-    password="{{ pass }}"
-    ca_cert="{{ lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=ca_cert') }}"
-    altsubject_match="{{ lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=altsubject_match') }}"
-    phase2="{{ lookup('community.general.passwordstore', 'wifi/' + name + ' subkey=phase2') }}"
-{% elif type == 'open' %}
-    key_mgmt=NONE
-{% else %}
-    # Error, unknown type: {{ type }}
-{% endif %}
-}
-{% endfor %}
-
-{% endfor %}
-{# REFERENCES
-
-# WPA
-network={
-    ssid="WPA_SSID"
-    psk="XXXXXXXXXXXXXXXXXXXXXXXXXX"
-}
-
-# WEP
-network={
-    ssid="WEP_SSID"
-    key_mgmt=NONE
-    wep_key0=FFFFFFFFFFFFFFFFFFFFFFFFFF
-}
-
-# Open
-network={
-    ssid="OPEN_SSID"
-    key_mgmt=NONE
-}
-
-# eduroam password
-network={
-    ssid="eduroam"
-    key_mgmt=WPA-EAP
-    eap=PEAP
-    identity="id@univ.tld"
-    password="hunter2"
-}
-
-# eduroam certificate
-network={
-    ssid="eduroam"
-    key_mgmt=WPA-EAP
-    # pairwise=CCMP
-    pairwise=CCMP TKIP
-    group=CCMP TKIP
-    eap=TLS
-    ca_cert="/path/to/ca.pem"
-    identity="id@univ.tld"
-    domain_suffix_match="wifi.univ.tld"
-    client_cert="/path/to/cert.pem"
-    private_key="/path/to/key.pem"
-    private_key_passwd="hunter2"
-    phase2="auth="
-    #anonymous_identity=""
-}
-
-#}

config/automatrop/roles/vim/handlers/main.yml

@@ -1,12 +0,0 @@
----
-- name: Upgrade Neovim plugins
-  ansible.builtin.command: nvim +PlugUpgrade +PlugUpdate +PlugInstall +qall!
-  listen: nvim plugins changed
-  environment:
-    VIMINIT: source {{ ansible_user_dir }}/.config/nvim/plugininstall.vim
-
-- name: Upgrade Vim plugins
-  ansible.builtin.command: vim +PlugUpgrade +PlugUpdate +PlugInstall +qall!
-  listen: vim plugins changed
-  environment:
-    VIMINIT: source {{ ansible_user_dir }}/.config/vim/plugininstall.vim

config/automatrop/roles/vim/tasks/main.yml

@@ -1,55 +0,0 @@
----
-- name: Set vim variants to use
-  ansible.builtin.set_fact:
-    vim_variants:
-      - vim
-      - nvim
-# TODO vim-minimal for bsh
-# TODO Select those in a clever way
-
-- name: Create vim configuration directory
-  ansible.builtin.file:
-    state: directory
-    path: "{{ ansible_user_dir }}/.config/{{ item }}"
-    mode: u=rwx,g=rx,o=rx
-  loop: "{{ vim_variants }}"
-
-- name: Install vim-plug
-  ansible.builtin.get_url:
-    url: https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
-    dest: "{{ ansible_user_dir }}/.config/vim/plug.vim"
-    mode: u=rw,g=r,o=r
-
-- name: Install loader
-  ansible.builtin.template:
-    src: loader.j2
-    dest: "{{ ansible_user_dir }}/.config/vim/loader.vim"
-    mode: u=rw,g=r,o=r
-
-- name: Install theme
-  ansible.builtin.template:
-    src: theme.j2
-    dest: "{{ ansible_user_dir }}/.config/vim/theme.vim"
-    mode: u=rw,g=r,o=r
-  tags:
-    - color
-
-- name: Configure vim plugin list
-  ansible.builtin.template:
-    src: plugininstall.j2
-    dest: "{{ ansible_user_dir }}/.config/{{ variant }}/plugininstall.vim"
-    mode: u=rw,g=r,o=r
-  notify:
-    - "{{ variant }} plugins changed"
-  loop: "{{ vim_variants }}"
-  loop_control:
-    loop_var: variant
-
-- name: Configure vim
-  ansible.builtin.template:
-    src: init.vim.j2
-    dest: "{{ ansible_user_dir }}/.config/{{ variant }}/init.vim"
-    mode: u=rw,g=r,o=r
-  loop: "{{ vim_variants }}"
-  loop_control:
-    loop_var: variant

config/automatrop/roles/vim/templates/editor.j2

@@ -1,101 +0,0 @@
-" From https://www.hillelwayne.com/post/intermediate-vim/
-
-set encoding=utf-8
-set title
-
-set number
-set ruler
-set wrap
-
-set scrolloff=10
-
-set ignorecase
-set smartcase
-set gdefault
-if has('nvim')
-    set inccommand=nosplit " Shows you in realtime what changes your ex command should make.
-endif
-
-set incsearch
-
-set hlsearch
-
-set tabstop=4
-set shiftwidth=4
-set expandtab
-
-set visualbell
-set noerrorbells
-
-set backspace=indent,eol,start
-
-set hidden
-set updatetime=250
-set lazyredraw " Do not redraw screen in the middle of a macro. Makes them complete faster.
-
-set cursorcolumn
-
-set splitbelow
-
-" Turn off relativenumber only for insert mode.
-if has('nvim')
-    set relativenumber
-    augroup every
-      autocmd!
-      au InsertEnter * set norelativenumber
-      au InsertLeave * set relativenumber
-    augroup END
-endif
-
-" Keep undo history across sessions by storing it in a file
-if has('persistent_undo')
-    let myUndoDir = expand(vimDir . '/undodir')
-    " Create dirs
-    call system('mkdir ' . myUndoDir)
-    let &undodir = myUndoDir
-    set undofile
-endif
-
-syntax enable
-
-" From http://stackoverflow.com/a/5004785/2766106
-set list
-set listchars=tab:╾╌,trail:·,extends:↦,precedes:↤,nbsp:_
-set showbreak=↪
-
-filetype on
-filetype plugin on
-filetype indent on
-
-set wildmode=longest:full,full
-set wildmenu
-set showcmd
-
-" Completion
-
-" Avoid showing message extra message when using completion
-set shortmess+=c
-
-" Close the file explorer once you select a file
-let g:netrw_fastbrowse = 0
-
-" Allow saving of files as sudo when I forgot to start vim using sudo.
-" From https://stackoverflow.com/a/7078429
-cmap w!! w !sudo tee > /dev/null %
-
-imap jk <Esc>
-vmap <Enter> <Esc>
-
-nmap <Enter> o<Esc>
-nmap <C-H> :bp<CR>
-nmap <C-L> :bn<CR>
-nmap <C-K> kkkkkkkkkkkkkkkkkkkkk
-nmap <C-J> jjjjjjjjjjjjjjjjjjjjj
-
-" \s to replace globally the word under the cursor
-nnoremap <Leader>s :%s/\<<C-r><C-w>\>/
-
-" add extensions to syntax
-au BufNewFile,BufRead *.jinja set filetype=jinja2
-
-command Reload source $MYVIMRC

config/automatrop/roles/vim/templates/init.vim.j2

@@ -1,23 +0,0 @@
-set nocompatible
-filetype on
-
-" SET PATHS
-
-set runtimepath+=~/.config/{{ variant }}
-let vimDir = '$HOME/.cache/{{ variant }}'
-call system('mkdir ' . vimDir)
-let &runtimepath.=','.vimDir
-set viminfo+=n~/.cache/{{ variant }}/viminfo
-
-" PLUGIN INSTALLATION
-
-source ~/.config/{{ variant }}/plugininstall.vim
-
-" EDITOR CONFIGURATION
-
-{% include 'editor.j2' %}
-
-" PLUGINS CONFIGURATION
-
-{% include 'pluginconfig.j2' %}
-

config/automatrop/roles/vim/templates/loader.j2

@@ -1,6 +0,0 @@
-if has('nvim')
-    let $MYVIMRC="~/.config/nvim/init.vim"
-else
-    let $MYVIMRC="~/.config/vim/init.vim"
-endif
-source $MYVIMRC

config/automatrop/roles/vim/templates/pluginconfig.j2

@@ -1,2 +0,0 @@
-{% set plugins = namespace(sources=[]) %}
-{% include 'pluginlist.j2' %}

config/automatrop/roles/vim/templates/plugininstall.j2

@@ -1,13 +0,0 @@
-source ~/.config/vim/plug.vim
-{% set plugins = namespace(sources=[]) %}
-{% import 'pluginlist.j2' as pluginlist with context %}
-
-call plug#begin('~/.cache/{{ variant }}/plugged')
-{% for link, extra in plugins.sources  %}
-{% if extra %}
-Plug '{{ link }}', { {% for k, v in extra.items() %}'{{ k }}': '{{ v }}', {% endfor %} }
-{% else %}
-Plug '{{ link }}'
-{% endif %}
-{% endfor %}
-call plug#end()

config/automatrop/roles/vim/templates/pluginlist.j2

@@ -1,115 +0,0 @@
-{% macro add_source(link, extra={}) -%}
-{% set plugins.sources = plugins.sources + [(link, extra)] %}
-{%- endmacro -%}
-{% macro use_plugin(name) -%}
-" START PLUGIN CONFIG {{ name }}
-{% include 'plugins/' + name + '.j2' +%}
-" END PLUGIN CONFIG {{ name }}
-{%- endmacro -%}
-
-" Visuals
-{{ use_plugin('base16') }}
-{{ use_plugin('devicons') }}
-{% if variant == 'nvim' %}
-{{ use_plugin('specs') }}
-{{ use_plugin('scrollview') }}
-{% endif %}
-
-" Theme
-source ~/.config/vim/theme.vim
-
-" Status/tab lines
-{% if variant == 'nvim' %}
-{{ use_plugin('barbar') }}
-{{ use_plugin('feline') }}
-{% else %}
-{{ use_plugin('airline') }}
-{% endif %}
-
-" Goto utilities
-{% if variant == 'nvim' %}
-{{ use_plugin('telescope') }}
-{% else %}
-{{ use_plugin('fzf') }}
-{% endif %}
-
-" Search/replace
-{{ use_plugin('abolish') }}
-{{ use_plugin('easy_align') }}
-
-" Sourounding pairs
-{{ use_plugin('surround') }}
-{{ use_plugin('targets') }}
-
-" f/F mode
-{{ use_plugin('shot_f') }}
-{{ use_plugin('quick_scope') }}
-
-" Registers
-{{ use_plugin('registers') }}
-
-
-" Tags/Symbols
-{{ use_plugin('gutentags') }}
-{% if variant == 'nvim' %}
-{{ use_plugin('symbols-outline') }}
-{% else %}
-{{ use_plugin('vista') }}
-{% endif %}
-
-" Language Server Client
-{% if variant == 'nvim' %}
-{{ use_plugin('nvim_lspconfig') }}
-{{ use_plugin('lightbulb') }}
-{{ use_plugin('lspkind') }}
-{{ use_plugin('lsp_signature') }}
-{% else %}
-{{ use_plugin('vim_lsp') }}
-{% endif %}
-
-" Treesitter
-{% if variant == 'nvim' %}
-{{ use_plugin('treesitter') }}
-{{ use_plugin('ts-rainbow') }}
-{# TODO
-{{ use_plugin('indent-blankline') }}
-#}
-{% endif %}
-
-" Snippets
-{{ use_plugin('vsnip') }}
-
-" Auto-completion
-{% if variant == 'nvim' %}
-{{ use_plugin('nvim_compe') }}
-{% else %}
-{{ use_plugin('deoplete') }}
-{{ use_plugin('supertab') }}
-{% endif %}
-
-" Undo management
-{{ use_plugin('undotree') }}
-
-" Git helpers
-{{ use_plugin('fugitive') }}
-{% if variant == 'nvim' %}
-{{ use_plugin('gitsigns') }}
-{% else %}
-{{ use_plugin('gitgutter') }}
-{% endif %}
-
-" Language-specific stuff
-{{ use_plugin('tcomment') }}
-{{ use_plugin('languagetool') }}
-{{ use_plugin('pandoc') }}
-{% if variant == 'nvim' %}
-{{ use_plugin('dap') }}
-{{ use_plugin('colorizer') }}
-{% else %}
-{% if 'c' in dev_stuffs or 'c++' in dev_stuffs %}
-{{ use_plugin('vebugger') }}
-{% endif %}
-{% endif %}
-{% if 'ansible' in dev_stuffs %}
-{{ use_plugin('ansible') }}
-{% endif %}

config/automatrop/roles/vim/templates/plugins/abolish.j2

@@ -1,2 +0,0 @@
-{# Regex for words, with case in mind #}
-{{ add_source('tpope/tpope-vim-abolish') -}}

config/automatrop/roles/vim/templates/plugins/airline.j2

@@ -1,15 +0,0 @@
-{{ add_source('vim-airline/vim-airline') -}}
-{{ add_source('vim-airline/vim-airline-themes') -}}
-set noshowmode
-set laststatus=2
-let g:airline_powerline_fonts = 1
-{% if variant != 'nvim' %}
-let g:airline#extensions#tabline#enabled = 1
-{% endif %}
-
-let g:airline_section_a = airline#section#create(['mode'])
-let g:airline_section_b = airline#section#create(['branch', 'hunks'])
-" let g:airline_section_z = airline#section#create(['%B', '@', '%l', ':', '%c'])
-
-let airline#extensions#languageclient#error_symbol = '✖ '
-let airline#extensions#languageclient#warning_symbol = '⚠ '

config/automatrop/roles/vim/templates/plugins/ale.j2

@@ -1,10 +0,0 @@
-" Asynchronous Lint Engine
-" LSP client for vim and nvim
-{{ add_source('dense-analysis/ale') }}
-
-nmap <F3> :ALEFix<CR>
-
-let g:ale_sign_error = '×'
-let g:ale_sign_warning = '!'
-let g:ale_completion_enabled = 1
-let g:ale_fixers = ['autopep8', 'shfmt', 'uncrustify', 'remove_trailing_lines', 'trim_whitespace', 'phpcbf']

config/automatrop/roles/vim/templates/plugins/ansible.j2

@@ -1,2 +0,0 @@
-{# Various for Ansible #}
-{{ add_source('pearofducks/ansible-vim', { 'do': './UltiSnips/generate.sh'}) -}}